Simes

GENERAL CATALOGUE 2019-2020

Quality light for outdoors
To Simes innovation means shaping a vision and developing continuous excellence. It means serving architecture, making luminaires that are a tangible summary of the following concepts:
– solidity and duration over time, guaranteed through the use of innovative materials and processes;
– elegance of forms and design of objects and minimal volumes to adapt to any environment;
– quality of light, as a result of a set of factors that determine the choice of fixtures and the type of effect required.
Luminous efficiency, in other words the ratio between luminous flux and power absorption (lm/W), is an important parameter but it cannot be the only criteria to define quality. The maximum luminous efficiency is obtained by measuring only the LED source and is known as “nominal flux”. The LED source inside a fixture with an optical system causes a natural dispersion and therefore a reduction in its efficiency (Luminaire luminous flux).
The colour rendering index or CRI is a very important characteristic that needs to be considered as it indicates the ability of a light source to reveal different colours, tones and colour shades of objects in the most realistic and natural fashion. A high colour rendering index (CRI>90) corresponds to a lower luminous efficiency. For outdoor lighting applications a CRI of 70 or 80 is often used as it is wrongly assumed that a lower colour rendering index is sufficient for outdoor lighting. Simes believes that our private outdoor spaces are simply an
extension of our indoor living areas. These areas therefore require superior colour rendering index levels even at the cost of luminous efficiency.
The colour temperature of light (colour tone) measured in degrees Kelvin (K) is another important parameter to chose from. We must consider that the lumious efficiency is also determined by colour temperature. Warm light has lower efficiency than cold light. Simes offers fixtures in 3000K, 4000K and 2700K on request. The selection of the correct colour temperature in relation to the architectural characteristics of the surroundings is fundamental in determining the final quality of the project.
To give an overall definition of quality we must also underline the importance of optics (lenses or reflectors). These can be described as performing when they emit the highest flux levels possible in the required direction, in a uniform manner and by limiting glare.
Glare can be caused by direct light or stray light, in other words the unwanted portion of light generated by reflections inside the optical system.
To engineer fixtures fitted with anti glare cowels and to fine tune all those elements that permit to reduce stray light, means marginally sacrificing efficiency and give more importance to visual comfort for the wellbeing of the end user.
Flickering, a very annoying effect visible through video recordings and photos, can influence our perception and disturb our sight. If the LED is driven in an adequate
way through the use of specific drivers this effect can be significantly reduced.
We cannot ignore the concept of LED lifetime. As with all light sources LEDs also reduce their performance over time due to ageing and heat. The LED lifetime can be prolonged if the heat generated is properly dissipated and therefore reduce the working temperature.
The lighting design project must also measure the right quantity of light in spaces or on objects by creating perfect harmony between background light, accents and shadows. To position the fixtures in the right place is not enough; to achieve the right balance we must have fixtures that can be set at different intensities allowing to easily adjust the luminous intensity and achieve the desired effect.
The sum of all the above factors determines the quality of light and the effectiveness and success of the lighting project.
For this reason we always suggest to seek help from qualified and competent professionals that can guide you, not only in the fixture selection but also in the direction of the concept that can enhance the spaces to illuminate.
Today the entire Simes portfolio is fitted with LED; a technological revolution that has enabled us to reduce both size and energy consumption, to improve visual comfort and quality of light, transforming the Simes catalogue into a series of precise and sophisticated lighting tools at the service of designers.

Index
Concrete 06
Concrete applique 8 Concrete wall 10 Concrete bollard 10 Concrete up-light 12
Wood
Projectors
14 Projectors 20
19 Focus 72 18 Keen 22 16 Loft spot 86
Movit 58 Outline 66 Stage 42 Stage round spot 30 Streamline projector 48 Techno Spot 80 Techno rectangular 80 Twist 52
Wall mounted
Linear effects 256
Wall mounted
278 Downlight 350
Linear effect
Wall mounted
Ceiling
Cool wood Look wood Skill wood
Continuous Rod Minimal 266 Continuous Rod Comfort 272 Streamline Wall mounted 258 Led Tube 262
Appeal Cool
Cool square Kube
300 Catch Recessed 360 288 Catch Surface 356 292 Lobby 370 296 Loft ceiling 323 252 Nanoled Stainless Steel 100 318 Stage round ceiling 352 304 Zip downlight 376
Lift rectangular
Loft
Look
Plan 312 Plafoniere 334 Smooth 338 Slot 344 Trim 280 Vedo 330 Zen 324

Ground recessed
Wall recessed
Wall recessed
Wall mounted
Walk-Over 90 Drive-Over 150
172
Accent lighting
Bollard 382
Urban lighting
Submersion 462
Bollards
Urban lighting
Submersion
202
196
220
226
Accent lighting 234
Compact 108 Continuous line 138 Flat 152 Linear Walk-Over 146 Microsparks 164 Minilinear 142 Miniround 142 Nanoled Stainless Steel 92 Over-all 134 Plano 102 Ring 152 Suit 164 Zip 114
Blinker
Brick of Light
Brique
Eos
Ghost 174 Marker 208 Nanoled Stainless Steel 98 Skill 212 Step 230 Walker 208
424
Blitz 242 Lift 246 Nanoled frame 236 Shape 236
Blinker bollard Column
Cool bollard
Cool square bollard Cubiks
Ikonic
Kube
Look bollard Moai
Reef
Skill bollard Step bollard Tomorrow Tonight Trim bollard
202 Avenue
408 Cigarette
288 Focus tower 72 292 Keen 22 414 Minislot disk 458 398 Movit 58 296 Outline 66 304 Park 440 420 Poster 454 388 Slot pole 450 218 Smooth pole mounted 342 230 Stage 42 384 Stage round spot 30 404 Stelo 436 280 Tomorrow post top 426
Twist 52
446 430
Pool 462 Pool spot 462
Remote 468 supplies
and codes

Designers
Stig Myler Holscher Design
Paolo Rizzatto
Holscher Design is one of the most valued and prize-winning design agencies in Scandinavia with more than 25 years of expertise: a team of innovating people with a solid architectural background with a mission to help customers improve the quality of lives of people. Over the years the assignments of the agency have extended from large scale architecture to the design of products. When confronted with very complex demands, the solutions suggested aim at simplifying the complexity by balancing form and function in an even aesthetical manner. The agency has been founded by Knud Holscher, one of the most influential designers in Scandinavia. His work has had a strong impact on the international design community. Many of his projects have become world famous classics for which the agency has been awarded over the years with several prizes.
Stage round spot
Paolo Rizzatto, born in Milan in 1941, has graduated in architecture in 1965 at the Politecnico of Milan. In his Milan based office he works as a freelancer in the architectural field, interior design and design. In 1978 he has founded together with Riccardo Sarfatti the company Luceplan deepening his experience in the lighting design field. Since he became famous worldwide for his works designed starting in the seventies he has held courses and conferences in several universities. He has been awarded with many of the most prestigious national and international honours and prizes (among which 5 Compassi d’Oro) and his works are on show in the permanent collections of several museums and foundations. Rizzatto’s design going from the scale of a city to the one of an object is marked by a constancy and a consistency that allowed him to draw a recognizable cultural course without running after trends nor vogue.
Brick Light wall recessed
Brick Light stand alone
Brick Light only glass

Matteo Thun
Marc Sadler
Klaus Begasse
Matteo Thun, architect and designer, was born in Bolzano in 1952. He studied at the Salzburg Academy with Oskar Kokoschka and at the University of Florence. After meeting Ettore Sottsass, he became co-founder of the ‘Memphis’ group in Milan and was a partner at Sottsass Associati from 1980 to 1984. He was a professor of design at the University of Applied Arts in Vienna (Hochschule für Angewandte Kunst, Wien) from 1983 to 2000. In 1984 he opened his own studio in Milan and became the Art Director of Swatch from 1990 to 1993. An encounter with Luca Colombo and Antonio Rodriguez led to the establishment of Matteo Thun & Partners in 2001, which was later organized into the companies MTLC, MTD-R and MTD-R China. These different creative entities develop projects in the fields of architecture, interior design and product design. The companies employ around sixty professionals, including architects, designers and graphic designers.
Look Wood
Cool Wood
Skill Wood
Marc Sadler was born in Austria with French origin and is now resident in Italy. One of the first graduates in “esthétique industrielle” at ENSAD Paris with a thesis on plastic materials, he pioneered the use of experimentation with different materials. The contamination between technologies become a distinctive aspect of his business. Citizen of the world (he lived and worked for many years in Europe, North America and Asia) and eclectic designer, he is now a consultant for furniture and lighting companies, as well as for large and small appliances, sports and other more technical fields. Four-time winner of the ADI Golden Compass (1994, 2001, 2008 and 2014), his career has been rewarded internationally for many times over the years.
Born in Wiesbaden, Germany. Architectural diploma at the University of Stuttgart, Klaus Begasse founded the interdisciplinary bureau for architecture, product design and media design. Product designer, Begasse won different international awards as: Red Dot Award, iF Design Award, Good Design Award – Chicago Athenaeum, Swiss Design Award and German Design Award.
For SIMES Begasse created products which are the expression of the newest LED technology and highest functionality. They are slim, flexible, visionary, multifunctional, sculptural, efficient, miniaturized and optimized. All luminaires together are intelligently designed tools inspired by fundamental values that consider well illuminated sceneries.
Ghost for Cast Concrete
Ghost for Cladding
Ghost for construction materials and insulation panels
Keen Twist
Movit Outline
Minishape Smooth

Applique protruding glass
Concrete
Concrete is the leading architectural material of the last century because it redefined the standards of architectural design through the work of the late “Maestros”. Rigorous and poetic, solid and raw, concrete is an essential element for the exterior. It is a living material that ages, transforms and evolves absorbing the surrounding colors, blending, integrating and interacting with the architecture in terms of form and function.
The contrast between the untouchable lighting effects and the pure strength of the solid concrete structures, designed in simple forms, create a strong emotional impact. The aluminium takes on the more structural part whilst the concrete a more protective aesthetical function leaving the emotional role to the lighting effect.
Wall
Up-light
Bollard
7

CONCRETE Applique protruding glass
Concrete covering with added synthetic fibres with high mechanical strength. Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Toughened glass diffuser.
Stainless steel screws.
Luminaire with one single cable entry and grommet (Applique).
Pre-wired luminaire with 1m of neoprene cable (Mini Applique). Silicone gaskets.
This luminaire has been manufactured with hand crafted procedures, therefore small imperfections, subsidence of the concrete surface, actual cracks and future, colour ripples and variations over time, are deliberately present
and they are a feature of the concrete luminaire, proving the hand-made manufacturing procedure.
Protection class
IP65
Isolation class
CLASS I y (Applique) ( CLASS II q (Mini Applique)
Mechanical resistance
IK 06
Leds 4000K CRI90 versions are available on request.
REGISTERED DESIGN
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
8
Finishing:
Concrete
(cod. 35)

CONCRETE Applique protruding glass Mini Applique Single emission
240
52 6
C.8015W.35
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 475lm
Rated input power 12,5W
220V-240V AC 50/60Hz / DC Not Dimmable
C.8016W.35
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 389lm
Rated input power 12,5W
220V-240V AC 50/60Hz / DC Not Dimmable
Mini Applique Double emission
240
6 52 6
Applique Single emission
310
C.8005W.35
MID-POWER LEDs 3000K CRI90 1860lm Rated luminaire luminous flux 888lm
Rated input power 19W
220V-240V AC 50/60Hz / DC Not Dimmable
63 8
C.8006W.35
MID-POWER LEDs 3000K CRI90 1860lm Rated luminaire luminous flux 723lm
Rated input power 19W
220V-240V AC 50/60Hz / DC Not Dimmable
8 63 8
Applique Double emission
310
www.simes.it/concrete-applique
lux
lux
lux
lux
9
115
115
90 90

CONCRETE Wall recesed and Bollard
Wood Beton, Iseo, Italy – Studio Archiabita (Arch. Luciano Ragni, Arch. Romina Girolama Turra) © ph. Mario Bertani
10
Concrete covering with added synthetic fibres with high mechanical strength. Lighting fixture in die-cast EN AB- 47100 aluminium housing with high corrosion resistance.
Clear Polycarbonate diffuser. Stainless steel screws.
Pre-wired luminaire with 3m of neoprene cable (WALL).
Pre-wired luminaire with neoprene cable and connector in the bollard. Silicone gaskets.
This luminaire has been manufactured with hand crafted procedures, therefore small imperfections, subsidence of
the surface, actual cracks and future, colour ripples and variations over time, are deliberately present and they are
a feature of the luminaire, proving the hand-made manufacturing procedure.
Protection class
S.5506
Finishing:
Concrete
(cod. 35)
IP65 4 way connector for through wiring (in/out).
Isolation class
CLASS I y (WALL CLASS II q BOLLARD
Mechanical resistance
IK 10
Leds 4000K CRI90 versions are available on request.
REGISTERED DESIGN
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it

CONCRETE Wall recessed
C.8050W.35
MID-POWER LEDs 3000K CRI80 880lm Rated luminaire luminous flux 301lm
Rated input power 10W
220V-230V AC 50/60Hz Phase-cut dimmable
290 58
Accessory for surface installation
H=
0.5 m
lux
Concrete Wall, through the use of the fixing base, becomes a surface fitting.
CONCRETE Bollard H 250 mm
335 105 105
H 450 mm
C.8054
Fixing base for surface applications
C.8100W.35 Single emission
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 361lm
Rated input power 13,5W
220V-240V AC 50/60Hz / DC Not Dimmable
C.8101W.35 Double emission
MID-POWER LEDs 3000K CRI90 2180lm Rated luminaire luminous flux 803lm
Rated input power 25W
220V-240V AC 50/60Hz / DC Not Dimmable
C.8105W.35 Single emission
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 399lm
Rated input power 13,5W
220V-240V AC 50/60Hz / DC Not Dimmable
C.8106W.35 Double emission
MID-POWER LEDs 3000K CRI90 2180lm Rated luminaire luminous flux 883lm
Rated input power 25W
220V-240V AC 50/60Hz / DC Not Dimmable
S.6359
FLANGE FOR CONCRETE BOLLARD
To be fixed in concrete.
280
lux
lux
lux
lux
335 105 105
11
450
250
140
150

CONCRETE Surface mounted up-light
Concrete covering with added synthetic fibres with high mechanical strength. Die cast EN AB-47100 aluminium housing with high corrosion resistance. Reflector in polymers covered with 99.98% pure aluminium.
Toughened glass diffuser. Stainless steel screws. Pre-wired luminaire with 5m of neoprene cable.
Silicone gaskets.
Supplied with ground fixing base.
This luminaire has been manufactured
with hand crafted procedures, therefore small imperfections, subsidence of the concrete surface, actual cracks and future, colour ripples and variations over time, are deliberately present and they are a feature of the concrete luminaire, proving the hand- made manufacturing procedure.
Protection class
IP67
Isolation class
CLASS I y Mechanical resistance
IK 08
Leds 4000K CRI90 versions are available on request.
REGISTERED DESIGN
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
12
Finishing:
Concrete
(cod. 35)

CONCRETE Surface mounted up-light
C.8150W.35 h(m)
E(lx) 3000K
17°
1 COB LED 3000K CRI83 800lm Rated luminaire luminous flux 796lm Rated input power 8,6W
220V-230V AC 50/60Hz Not Dimmable
C.8155W.35
1 COB LED 3000K CRI83 2000lm Rated luminaire luminous flux 1600lm Rated input power 19,6W
220V-230V AC 50/60Hz Not Dimmable
10.0 0.5 8.0 1.0 6.0 2.0 4.0 6.0 2.0 43.0
0(m)
17°
0.1 m
0.1 m
h(m)
10.0 1.0
8.0 1.5 6.0 3.0 4.0 9.0 2.0 67.0
0(m)
24°
E(lx) 3000K
24°
Ø 155
Ground stake accessory for garden installation
S.3524
STAKE in polypropylene. Colour: black (code 09) Length 270 mm
www.simes.it/concrete-uplight 13
270
Ø 240 70

Applique
“Tailored” by
When light blends together with an essential and innovative design, a unique sense of elegance arises with a strong emotional impact. Simple shapes and primitive geometries characterize the range “Tailored” by Matteo Thun, from the creative collaboration between Simes and the prestigious Italian architect and designer.
A perfect balance between sustainable and diverse material expressions: the range was developed using a combination of wood teak that conveys a warm effect and the minimalist lines of aluminium, new finishes specifically dedicated to improve the quality of the lighting performance. Natural elegance and lighting poetry that dress with charm the environments with an unmistakable style.
Surface wall mounted
Bollard
www.simes.it/wood 15

“TAYLORED” BY MATTEO THUN Applique, bollard, surface wall mounted
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Oiled TEAK wood finish 8mm thick. Toughened glass diffuser.
Stainless steel screws.
Luminaire supplied with 1m of cable (Miniskill).
Luminaire with double cable entry and grommet (Skill).
Pre-wired luminaire with 1m of neoprene cable (Look and Cool Applique).
Pre-wired luminaire with neoprene cable and connector (Look and Cool Bollard).
Luminaire suitable for single grommet. Silicone gaskets.
Double powder paint.
Colours:
White + teak wood (code 01)
Burnished bronze + teak wood (code 20)
Protection class
IP65
Isolation class
CLASS III  MINISKILL 24V c.c. CLASS II q LOOK and COOL CLASS I y SKILL
Mechanical resistance
IK 06 LOOK and COOL IK 08 SKILL
LOOK and COOL
Leds 4000K CRI90 versions are available on request.
PATENTED
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
This luminaire has been manufactured
with hand crafted procedures, therefore small imperfections, subsidence of the wood surface, actual cracks and future, colour ripples and variations over time,
are deliberately present and they are a feature of the wood, proving the hand-made manufacturing procedure.
16

SKILL WOOD
Miniskill vertical
Skill square
60
31
L.9230W
MID-POWER LEDs 3000K CRI90 424lm Rated luminaire luminous flux 187lm Rated input power 4,7W 24V DC
Requires a remote constant voltage driver (page 468-469)
L.9260W
MID-POWER LEDs 3000K CRI90 1016lm Rated luminaire luminous flux 360lm
Rated input power 9,7W
220V-240V AC 50/60Hz / DC Not Dimmable
L.9240W
H=
0.3 m
H=
0.5 m
lux
200
33
Skill rectangular
H=
0.5 m
270
35
MID-POWER LEDs 3000K CRI90 1270lm Rated luminaire luminous flux 422lm
Rated input power 13W
220V-240V AC 50/60Hz / DC Not Dimmable
3.0 2.4 1.8 1.2 0.6 0 0.6 1.2 1.8 2.4
lux
17
2.4 1.8 1.2 0.6
115 200
115

LOOK WOOD
L.9201W
single emission
220 33
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 475lm
Rated input power 12,5W
220V-230V AC 50/60Hz / DC Not Dimmable
220 33
L.9202W
double emission
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 389lm
Rated input power 12,5W
220V-230V AC 50/60Hz / DC Not Dimmable
Minilook bollard H 580 mm
L.9211W
MID-POWER LEDs 3000K CRI90 970lm
Rated luminaire luminous flux 334lm
Rated input power 12,5W
220V-230V AC 50/60Hz / DC Not Dimmable
L.9206W
Minilook bollard H 220 mm
220 66
MID-POWER LEDs 3000K CRI90 970lm Rated luminaire luminous flux 334lm
Rated input power 12,5W
220V-230V AC 50/60Hz / DC Not Dimmable
220 66
S.7249
FLANGE FOR MINILOOK BOLLARD
To be buried in concrete for L.9206W e L.9211W.
18
S.5506
4 way connector for through wiring (in/out).
lux
lux
lux
lux
220
580
80 80

COOL WOOD
90 33
L.9231W
Applique
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 488lm
Rated input power 12,5W
220V-230V AC 50/60Hz / DC Not Dimmable
L.9241W
Bollard H 580mm
lux
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 488lm
Rated input power 12,5W
220V-230V AC 50/60Hz / DC Not Dimmable
L.9236W
Bollard H 220mm
lux
220 33
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 488lm
Rated input power 12,5W
220V-230V AC 50/60Hz / DC Not Dimmable
220 33
S.7249
FLANGE FOR MINICOOL BOLLARD
Tto be buried in concrete for L.9236W e L.9241W.
S.5506
4 way connector for through wiring (in/out).
lux
19
220
580
220

Projectors
Keen 22 Stage round 30 Stage 42 Streamline 48 projectors
Techno spot 80 Techno rectangular 80 Loft spot 86
20

Twist 52 Movit 58 Outline 66 Focus 72
21

22
Gubbio Cathedral, Perugia, Italy – Arch. Francesco Raschi (Lighting design)

Keen
Adjustable spot projector
Keen represents the evolution of outdoor lighting projectors. A special double joint allows the projector to take infinite positions for different light effects. Its minimal design makes it suitable for a wide range of architectural project applications. Available in four sizes, Keen is engineered with the most advanced LED technology and different optical solutions, ensuring a performing light effect and energy saving characteristics.
XXIV edition
www.simes.it/keen 23

MICROKEEN Adjustable spot projector “Blade of light”
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Stainless steel screws.
Clear toughened glass diffuser.
Double joint allowing rotation on three different axis.
Luminaire supplied with 1,5m of cable. Silicone gaskets.
Protection class
IP65
Isolation class
CLASS II
Mechanical resistance
IK 07
Leds 4000K CRI90 versions are available on request.
Axis of rotation 1
Axis of rotation 2
Axis of rotation 3
The special double joint guarantees total freedom in directing the light beam: the luminaire is able to rotate on three different axes.
Double powder paint.
Colours:
White Aluminium grey
(code 01) (code 14)
24
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
PATENTED REGISTERED DESIGN

MICROKEEN Blade of light
90°x3°
113
S.1506W
1 HIGH-POWER LED 3000K CRI80 295lm Rated luminaire luminous flux 255lm
Rated input power 5,2W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
With Radial Lens 6°x90°
S.1508
ACCESSORY FOR VERTICAL INSTALLATION of MICROKEEN
S.1014
STAKE for MICROKEEN, MINIKEEN and KEEN Accessory for vertical installation only
Adhesive gobo for Microkeen
(included in the “Blade optic” version S.1506W)
The adhesive gobo for Microkeen can be adapted to modify the aperture of the beam and then applied on the front glass of the fixture. By simply cutting at the level of the required degrees you create a slit to allow the desired light emission.
Adhesive gobo with 70° aperture Adhesive gobo with 50° aperture Adhesive gobo with 30° aperture
40°
40° 30°
40°
30° 20°
-20° -30°
-40°
-30° -40°
-40°
25
190
90 40

KEEN Adjustable spot projector
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Stainless steel screws.
Clear toughened glass diffuser.
Double joint allowing rotation on three different axis.
Luminaire supplied with 1,5m of cable (Microkeen and Minikeen).
Pre-wired luminaire with neoprene cable (Keen and Megakeen). Silicone gaskets.
Double powder paint.
Protection class
IP65
Isolation class
CLASS II
Mechanical resistance
IK 07 MICRO/MINIKEEN IK 06 KEEN/MEGAKEEN
Leds 4000K CRI90 versions are available on request.
PATENTED REGISTERED DESIGN
26
Colours:
White Aluminium grey
(code 01) (code 14)
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it

MICROKEEN
113
S.1505W
1 HIGH-POWER LED 3000K CRI90 295lm Rated luminaire luminous flux 255lm
Rated input power 5,1W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 24°, 42° and 12°x40°
S.1508
ACCESSORY FOR VERTICAL INSTALLATION of MICROKEEN
S.1014
STAKE for MICROKEEN, MINIKEEN and KEEN Accessory for vertical installation only
10° 3000K h(m) Ø(m) E(lx)
2 0.36 1368 4 0.71 342 6 1.07 152 8 1.43 85 10 1.78 55
10°
MINIKEEN

24°
150
S.1500W
3 HIGH-POWER LEDs 3000K CRI90 710lm Rated luminaire luminous flux 510lm
Rated input power 7,6W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1501W
3 HIGH-POWER LEDs 3000K CRI90 710lm Rated luminaire luminous flux 511lm
Rated input power 7,6W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 42° and 12°x40°
S.1509
ACCESSORY FOR VERTICAL INSTALLATION of MINIKEEN
S.1014
STAKE for MICROKEEN, MINIKEEN and KEEN Accessory for vertical installation only
9° 3000K h(m) Ø(m) E(lx)
2 0.32 2824 4 0.64 706 6 0.97 314 8 1.29 176 10 1.61 113
24° 3000K h(m) Ø(m) E(lx)
2 0.84 650 4 1.69 162 6 2.53 72 8 3.37 41 10 4.21 26
27
190
105 42
190
73 40

KEEN
S.1510W
5 HIGH-POWER LEDs 3000K CRI90 1180lm
Rated luminaire luminous flux 965lm
Rated input power 16W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1511W
5 HIGH-POWER LEDs 3000K CRI90 1180lm
Rated luminaire luminous flux 909lm
Rated input power 16W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1513W
5 HIGH-POWER LEDs 3000K CRI90 1180lm
Rated luminaire luminous flux 886lm
Rated input power 16W
220V-240V AC 50/60Hz / DC Not Dimmable With ellipsoidal lenses
Beam lenses available on request with no surcharge: 42°
S.1519
ACCESSORY FOR VERTICAL INSTALLATION of KEEN
S.1014
STAKE for MICROKEEN, MINIKEEN and KEEN
Accessory for vertical installation only
S.1515W
7 HIGH-POWER LEDs 3000K CRI90 2100lm
Rated luminaire luminous flux 1640lm Rated input power 26,5W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1516W
7 HIGH-POWER LEDs 3000K CRI90 2100lm
Rated luminaire luminous flux 1642lm Rated input power 26,5W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1517W
7 HIGH-POWER LEDs 3000K CRI90 2100lm
240 Rated luminaire luminous flux 1527lm Rated input power 26,5W
h(m)
2 4 6 8 10
h(m)
2 4 6 8 10
h(m)
2 4 6 8 10
9° 3000K Ø(m) E(lx)
0.31 5148 0.63 1287 0.94 572 1.26 322 1.57 206
24° 3000K Ø(m) E(lx)
0.86 1127 1.72 282 2.57 125 3.43 70 4.29 45
12°x43° 3000K Ø(m) E(lx)
0.41 x 1.59 1039 0.81 x 3.18 260 1.22 x 4.78 115 1.63 x 6.37 65 2.03 x 7.96 42

24°
185
12° x 43°
MEGAKEEN
10°
24°
12° x 40°
220V-240V AC 50/60Hz / DC Not Dimmable With ellipsoidal lenses
Beam lenses available on request with no surcharge: 42°
S.3049
STAKE for MEGAKEEN
h(m)
2 4 6 8 10
h(m)
2 4 6 8 10
h(m)
2 4 6 8 10
10° 3000K Ø(m) E(lx)
0.34 8664 0.69 2166 1.03 963 1.37 541 1.71 347
24° 3000K Ø(m) E(lx)
0.86 1867 1.72 467 2.57 207 3.43 117 4.29 75
12°x40° 3000K Ø(m) E(lx)
0.41 x 1.42 2086 0.83 x 2.83 521 1.24 x 4.25 232 1.65 x 5.67 130 2.07 x 7.08 83
28
Megakeen projector in standard version can be fixed also to poles.
260
190
190 50
140 45

KEEN Pole mounted
The Keen, Minikeen and Microkeen pole versions have extended the project application configurations of this new projector. Thanks to the special anchor base the luminaire can be fixed to new or existing poles of diameter of no less than 60mm. Pre-wired luminaire with 6m of neoprene cable.
Microkeen “Blade of light” pole mounted
113
113
S.1546W
1 HIGH-POWER LED 3000K CRI80 295lm Rated luminaire luminous flux 255lm
Rated input power 5,2W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
With Radial Lens 6°x90°
S.1545W
1 HIGH-POWER LED 3000K CRI90 295lm Rated luminaire luminous flux 255lm
Rated input power 5,1W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 24°, 42° and 12°x40°
S.1520W
3 HIGH-POWER LEDs 3000K CRI90 710lm Rated luminaire luminous flux 510lm
Rated input power 7,6W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1521W
3 HIGH-POWER LEDs 3000K CRI90 710lm Rated luminaire luminous flux 511lm
Rated input power 7,6W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge:
42° and 12°x40°
S.1530W
5 HIGH-POWER LEDs 3000K CRI90 1180lm Rated luminaire luminous flux 965lm
Rated input power 16W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1531W
5 HIGH-POWER LEDs 3000K CRI90 1180lm Rated luminaire luminous flux 909lm
Rated input power 16W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1533W
5 HIGH-POWER LEDs 3000K CRI90 1180lm Rated luminaire luminous flux 886lm
Rated input power 16W
220V-240V AC 50/60Hz / DC Not Dimmable With ellipsoidal lenses
Beam lenses available on request with no surcharge: 42°
Microkeen pole mounted
90°x3°
Minikeen pole mounted
150
Keen pole mounted
185
10°

24°

24°
12° x 43°
29
140 45
105 42
73 40 90 40

30

Holscher Design
Stage round
Adjustable spot projector
With the launch of Stage Round Spot, the range of SIMES architectural floodlights becomes one of the most comprehensive and performing on the market place. The special grid that marks the design at the back, makes Stage Round Spot matching with the other floodlights of the range and stylistically approaches the ultra thin rectangular Stage, Megastage and Ministage floodlights. The comfortable optics, the feasibility of orienting the light in various angles and the advanced aesthetical research are the main features of the entire range. Their sizes are reduced to minimal dimensions yet maintaining the performance that remain at the top, both in terms of quality and light emitted. What makes the Stage range so unique is the Micro version with a special rotational “blade” optic that can project linear beams of light in every direction.
www.simes.it/stageround 31

MICROSTAGE ROUND Adjustable spot projector “Blade of light” 355°
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Stainless steel screws.
Radial lens.
Clear toughened glass diffuser. Luminaire supplied with 5m of cable. Silicone gaskets.
Double powder paint.
For the latest technical information and luminaire updates with LED technology please refer to the official website (www.simes.it)
Colours:
Aluminium grey (code 14)
Protection class
IP66
Isolation class
CLASS II
Mechanical resistance
IK 07 MICROSTAGE ROUND
Leds 4000K CRI80 versions are available on request.
PATENT PENDING REGISTERED DESIGN
Ajdustable
Microstage with “Blade optic” allows to rotate and adjust the beam orientation in any direction in the following way:
– rotation up to 355° of the optical housing;
– rotate the body upwads (90°) or downwards by (45°) through it vertical axis;
– rotation of the base of 360° through its horizontal axis of installation.
90°
45°
Beam orientation
Anthracite grey
(code 24)
32
360°

MICROSTAGE ROUND Blade of light Blade of light Optic
spot
Blade of light Optic wall and garden arm
110
Ø 59 360°
90° 45°
S.1301W
1 HIGH-POWER LED 3000K CRI80 270lm
Rated luminaire luminous flux 150lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable With Radial Lens 6°x90° Computer-simulated photometrics
S.1331W
90°x6°
110 90°
90°x6°
Ø 59 45° 45°
45° 1 HIGH-POWER LED 3000K CRI80 270lm Rated luminaire luminous flux 150lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable With Radial Lens 6°x90° Computer-simulated photometrics
Accessory for Microstage
S.1309
STAKE for MICROSTAGE
ROUND and ARM in polypropylene. Colour: black (code 09)
90°x6°
Adhesive gobo for Microstage
(included in the “Blade optic” version S.1301W and S.1331W)
The adhesive gobo for Microstage can be adapted to modify the aperture of the beam and then applied on the front glass of the fixture. By simply cutting at the level of the required degrees you create a slit to allow the desired light emission.
Adhesive gobo with 70° aperture
40°
Adhesive gobo with 50° aperture
40° 30°
Adhesive gobo with 30° aperture
40° 30°
3030 -40° -40° -40°

20°
-2 0° -°
33
350
18
Ø 62
Ø 62 355°
195
Ø 68 68 Ø 68

STAGE ROUND Adjustable spot projector
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Stainless steel screws.
99.98% pure aluminium reflectors, or with concentrating lenses.
Clear toughened glass diffuser. Luminaire supplied with 5m of cable (Microstage Spot/Pole mounted and Ministage).
Luminaire supplied with 6m of cable (Ministage, Stage and Megastage Pole mounted).
Pre-wired luminaire with neoprene cable and connector (Stage and Megastage).
Silicone gaskets.
Double powder paint.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
Colours:
Aluminium grey (code 14) Anthracite grey (code 24)
Protection class
IP66
Isolation class
CLASS II
Mechanical resistance
IK 07 MICROSTAGE / MINISTAGE ROUND IK 08 STAGE/ MEGASTAGE ROUND
Leds 4000K CRI90 versions are available on request.
Ajdustable
Stage round spot allows to rotate and adjust
the beam orientation in any direction in the following way:
– rotate the body upwads (90°) or downwards by (45°) through it vertical axis;
– rotation of the base of 360° through its horizontal axis of installation.
90°
45°
34
REGISTERED DESIGN
360°

MICROSTAGE ROUND Spot 12° Comfort Optic
S.1300W
1 HIGH-POWER LED 3000K CRI90 204lm
Rated luminaire luminous flux 160lm
Rated input power 2,6W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
Beam lenses available on request with no surcharge: 65°
S.1305W
1 COB LED 3000K CRI90 350lm
Rated luminaire luminous flux 284lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable
12° 3000K h(m) Ø(m) E(lx)
12°
34° Optic
90
Ø 59
360°
34° 3000K h(m) Ø(m) E(lx)
1 2 3 4 5
0.22 2438 0.43 610 0.65 271 0.87 152 1.09 98
34°
90° 45°
1 2 3 4 5
0.62 643 1.23 161 1.85 71 2.46 40 3.08 26
MICROSTAGE ROUND Wall and garden arm 12° Comfort Optic
S.1330W
1 HIGH-POWER LED 3000K CRI90 204lm
Rated luminaire luminous flux 160lm
Rated input power 2,6W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
Beam lenses available on request with no surcharge: 65°
S.1335W
1 COB LED 3000K CRI90 350lm
Rated luminaire luminous flux 284lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1308
VISOR for MICROSTAGE ROUND SPOT and ARM
Colour: black (cod .09)
S.1309
STAKE for MICROSTAGE ROUND SPOT and ARM
in polypropylene. Colour: black (code 09)
12° 3000K h(m) Ø(m) E(lx)
12°
12°
1 2 3 4 5
0.22 2438 0.43 610 0.65 271 0.87 152 1.09 98
34°
34°
Ø 68
45°
45°
34° 3000K h(m) Ø(m) E(lx)
1 0.62 643 2 1.23 161 3 1.85 71 4 2.46 40 5 3.08 26
90 90° Ø 62
34° Optic
Ø 59 45°
35
350
18
Ø 62
195 68 Ø 68

MINISTAGE ROUND Spot 12° Comfort Optic
27°- 58° Optics
S.1310W
4 HIGH-POWER LEDs 3000K CRI90 800lm Rated luminaire luminous flux 651lm
Rated input power 10,1W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 65° and 10°x44°
S.1315W
1 COB LED 3000K CRI90 1225lm
Rated luminaire luminous flux 1040lm Rated input power 11,2W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1316W
1 COB LED 3000K CRI90 1225lm
Rated luminaire luminous flux 1074lm Rated input power 11,2W
220V-240V AC 50/60Hz / DC Not Dimmable
12° h(m) Ø(m)
3000K E(lx)
12°
1 0.22 9745 2 0.43 2436 3 0.65 1083 4 0.87 609 5 1.09 390
27° h(m) Ø(m)
3000K E(lx)
27°
58°
120
Ø 85 360°
90° 45°
1 0.49 3453 2 0.98 863 3 1.46 384 4 1.95 216 5 2.44 64
58° 3000K h(m) Ø(m) E(lx)
1 1.10 1221 2 2.20 305 3 3.30 136 4 4.40 76 5 5.50 49
12° 3000K h(m) Ø(m) E(lx)
1 0.22 9745 2 0.43 2436 3 0.65 1083 4 0.87 609 5 1.09 390
MINISTAGE ROUND Wall and garden arm 12° Comfort Optic
12°
12°
27°- 58° Optics
S.1340W
4 HIGH-POWER LEDs 3000K CRI90 800lm Rated luminaire luminous flux 651lm
Rated input power 10,1W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 65° and 10°x44°
S.1345W
1 COB LED 3000K CRI90 1225lm
Rated luminaire luminous flux 1040lm Rated input power 11,2W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1346W
1 COB LED 3000K CRI90 1225lm
Rated luminaire luminous flux 1074lm Rated input power 11,2W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1318
VISOR for MINISTAGE ROUND SPOT and ARM
Colour: black (cod .09)
S.1319
STAKE for MINISTAGE ROUND SPOT and ARM
in polypropylene. Colour: black (code 09)
27° h(m) Ø(m)
3000K E(lx)
27°
27°
58°
58°
Ø 98
45°
120
Ø 85
Ø 93
45°
90°
45°
1 0.49 3453 2 0.98 863 3 1.46 384 4 1.95 216 5 2.44 64
58° 3000K h(m) Ø(m) E(lx)
1 1.10 1221 2 2.20 305 3 3.30 136 4 4.40 76 5 5.50 49
36
420
25
450 57
93 Ø 98
Ø 93

STAGE ROUND Spot 12° Comfort Optic
30°- 58° Optics
S.1320W
9 HIGH-POWER LEDs 3000K CRI90 2700lm Rated luminaire luminous flux 1742lm
Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 65° and 10°x44°
S.1325W
1 COB LED 3000K CRI90 4290lm
Rated luminaire luminous flux 3095lm Rated input power 37W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1326W
1 COB LED 3000K CRI90 4290lm
Rated luminaire luminous flux 3118lm Rated input power 37W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1328
VISOR for STAGE ROUND SPOT and ARM
Colour: black (cod .09)
S.3554
STAKE only for STAGE ROUND SPOT
in polypropylene. Colour: black (code 09)
S.1350W
9 HIGH-POWER LEDs 3000K CRI90 2700lm Rated luminaire luminous flux 1742lm
Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 65° and 10°x44°
S.1355W
1 COB LED 3000K CRI90 4290lm
Rated luminaire luminous flux 3095lm Rated input power 37W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1356W
1 COB LED 3000K CRI90 4290lm
Rated luminaire luminous flux 3118lm Rated input power 37W
220V-240V AC 50/60Hz / DC Not Dimmable
12° h(m) Ø(m)
3000K E(lx)
12°
2 0.42 6872 4 0.84 1718 6 1.26 764 8 1.68 429 10 2.10 275
30°
30° h(m) Ø(m)
3000K E(lx)
58°
185
Ø 133 360°
2 1.06 2748 4 2.11 687 6 3.17 305 8 4.23 172 10 5.28 110
58° 3000K h(m) Ø(m) E(lx)
2 2.22 939 4 4.43 235 6 6.65 104 8 8.87 59 10 11.09 38
527
88
Ø 150
90° 45°
STAGE ROUND Wall arm
12° Comfort Optic
12° h(m) Ø(m)
3000K E(lx)
12°
30°- 58° Optics
2 0.42 6872 4 0.84 1718 6 1.26 764 8 1.68 429 10 2.10 275
30°
30° h(m) Ø(m)
3000K E(lx)
38
Ø 145 45°
2 1.06 2748 4 2.11 687 6 3.17 305 8 4.23 172 10 5.28 110
90°
58°
58° h(m) Ø(m)
2 2.22
4 4.43 235 6 6.65 104 8 8.87 59 10 11.09 38
3000K E(lx)
939
37
60° 60° Ø 133
185
420
146 Ø 150
Ø 145

MEGASTAGE ROUND Spot 12° Comfort Optic
30°- 58° Optics
246
Ø 178 360°
90° 45°
S.1360W
16 HIGH-POWER LEDs 3000K CRI90 4590lm
Rated luminaire luminous flux 2900lm Rated input power 55W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
Beam lenses available on request with no surcharge: 65° and 10°x44°
S.1365W
1 COB LED 3000K CRI90 6700lm
Rated luminaire luminous flux 5400lm Rated input power 62,5W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
S.1366W
1 COB LED 3000K CRI90 6700lm
Rated luminaire luminous flux 5400lm Rated input power 62,5W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
S.1368
VISOR for MEGASTAGE ROUND SPOT
Colour: black (cod .09)
S.3554
STAKE for MEGASTAGE ROUND SPOT
in polypropylene. Colour: black (code 09)
12° 3000K h(m) Ø(m) E(lx)
12°
4 8 12 16 20
0.84 2853 1.68 713 2.52 317 3.36 178 4.20 114
30°
30° 3000K h(m) Ø(m) E(lx)
4 8 12 16 20
h(m)
2.11 1199 4.23 300 6.34 133 8.45 75 10.58 48
58° 3000K Ø(m) E(lx)
58°
4
8
12 13.30 45 16 17.74 25 20 22.17 16
4.43 406 8.87 102
38
420
191 Ø 200
Ø 191

39
“Art Park”, Milan, Italy @ Simes S.p.A.

STAGE ROUND Pole mounted
blade of light Optic
Microstage round pole mounted
S.1339W
1 HIGH-POWER LED 3000K CRI90 270lm Rated luminaire luminous flux 150lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable With Radial lens 6°x90° Computer-simulated photometrics
S.1337W
1 HIGH-POWER LED 3000K CRI90 204lm Rated luminaire luminous flux 160lm
Rated input power 2,6W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
Beam lenses available on request with no surcharge: 65°
S.1338W
1 COB LED 3000K CRI90 350lm
Rated luminaire luminous flux 284lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable
MICROSTAGE ROUND POLE MOUNTED
can be installed on poles ø60mm and ø76mm.
Ministage round pole mounted
S.1370W
4 HIGH-POWER LEDs 3000K CRI90 800lm Rated luminaire luminous flux 651lm
Rated input power 10,1W
220V-240V AC 50/60Hz / DC Not Dimmable Beam lenses available on request with no surcharge: 65° and 10°x44°
S.1375W
1 COB LED 3000K CRI90 1225lm
Rated luminaire luminous flux 1040lm Rated input power 11,2W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1376W
1 COB LED 3000K CRI90 1225lm
Rated luminaire luminous flux 1074lm Rated input power 11,2W
220V-240V AC 50/60Hz / DC Not Dimmable
MINISTAGE and STAGE POLE MOUNTED
can be installed on poles ø60mm, ø76mm, and ø102mm.
MINISTAGE may also be installed on top a pole on poles with 60mm diameter.
ø60mm – ø76mm MICROSTAGE ø60mm – ø76mm – ø102mm MINISTAGE
110
Ø 59 360°
12° Comfort Optic
34° Optic
90
Ø 59
360°
12° Comfort Optic
90° 45°
40
27°- 58° Optics
120
Ø 70 360°
90° 45°
90° 45°
90°x6°
12°
34°
12°
ø60mm
27°
58°
93 Ø 98 68 Ø 68 68 Ø 68
Ø 93
Ø 62 Ø 62 355°

STAGE ROUND Pole mounted
ø60mm – ø76mm – ø102mm STAGE ø102mm – ø120mm MEGASTAGE
S.1380W
9 HIGH-POWER LEDs 3000K CRI90 2700lm Rated luminaire luminous flux 1742lm
Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge:
65° and 10°x44°
S.1385W
1 COB LED 3000K CRI90 4290lm
Rated luminaire luminous flux 3095lm Rated input power 37W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1386W
1 COB LED 3000K CRI90 4290lm
Rated luminaire luminous flux 3118lm Rated input power 37W
220V-240V AC 50/60Hz / DC Not Dimmable
STAGE POLE MOUNTED can be installed on poles ø60mm, ø76mm, and ø102mm.
12° Comfort Optic
Stage round pole mounted
30°- 58° Optics
185
Ø 70 360°
12° Comfort Optic
90° 45°
12°
30°
58°
30°- 58° Optics
S.1390W
16 HIGH-POWER LEDs 3000K CRI90 4590lm Rated luminaire luminous flux 2900lm
Rated input power 55W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
Beam lenses available on request with no surcharge:
65° and 10°x44°
S.1395W
1 COB LED 3000K CRI90 6700lm
Rated luminaire luminous flux 5400lm Rated input power 62,5W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
S.1396W
1 COB LED 3000K CRI90 6700lm
Rated luminaire luminous flux 5400lm Rated input power 62,5W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
MEGASTAGE POLE MOUNTED can be installed on poles ø102mm and ø120mm.
Megastage round pole mounted
12°
246
Ø 95 360°
90° 45°
30°
58°
41
191 Ø 200
Ø 191
Ø 145
146 Ø 150

42

Stage
Adjustable projector
Stage is an ultra-thin and ultra-performing projector. Characterized by clean design and minimal thickness, Stage generates a luminous flux of extraordinary intensity and visual quality. Available in symmetrical and asymmetrical version, Stage is ready to house the DALI system (available on request), necessary to manage the quantity of light. The asymmetric version is characterized by an innovative scoop optic that guarantees lower luminance resulting in a high visual comfort.
www.simes.it/stage 43

STAGE Adjustable projector
PEDRALI S.P.A., Mornico al Serio, Bergamo, Italy – Arch. CZA Cino Zucchi Architetti © ph. Mario Bertani
S.1016
FLANGE FOR POLE Ø 60 mm INSTALLATION
Flange in die-cast aluminium for MINISTAGE and STAGE, suitable only for Ø 60mm poles.
The flange can be used for maximum 2 projectors, one for each side.
To install the flange on Ø 76mm pole the screws kit SACVITFOCTOWER2 must be purchased separately.
S.1239
FLANGE FOR POLE Ø 120 mm INSTALLATION
Flange in die-cast aluminium for STAGE and MEGASTAGE, suitable only for Ø 120 mm poles.
The flange can be used for maximum 2 projectors, one for each side. Flange for pole Ø 102 mm available on request.
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Stainless steel screws.
99.98% pure aluminium reflectors, or with concentrating or diffusing lenses. Clear toughened glass diffuser. Luminaire with double cable entry and cable glands.
Silicone gaskets.
Double powder paint.
Colour:
Aluminium grey (code 14) Anthracite grey (code 24)
Protection class
IP66
Isolation class
CLASS II
CLASS I y S.1210W, S.1212W, S.1230W, S.1236W, S.1237W
Mechanical resistance
IK 06
Leds 4000K CRI80 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
44

MINISTAGE
Asymmetrical optic
S.1225W
MID-POWER LEDs 3000K CRI80 4524lm
Rated luminaire luminous flux 2844lm Rated input power 35W
220V-240V AC 50/60Hz / DC Not Dimmable
h(m) 10 8
6 4 2
E(lx) 3000K 4432 8753
20 16 9 5 48 34 15 5 55 31 7 2
C0 21°+28° C90 94°
Symmetrical optic
180°
57 215
3 m
0 2 4
6 (m)
S.1226W
4 COB LEDs 3000K CRI80 5200lm
Rated luminaire luminous flux 3707lm Rated input power 39W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1227W
4 COB LEDs 3000K CRI80 5200lm
Rated luminaire luminous flux 3874lm Rated input power 39W
220V-240V AC 50/60Hz / DC Not Dimmable
h(m)
2 4 6 8 10
h(m)
2 4 6 8 10
19° 3000K Ø(m) E(lx)
0.70 4970 1.40 1242 2.09 552 2.79 311 3.49 199
35° 3000K Ø(m) E(lx)
1.28 2244 2.55 561 3.83 249 5.11 140 6.38 90
C0 19°
C0 35°
180°
57 215
Symmetrical optic
S.1220W
1 COB LED 3000K CRI80 5319lm
Rated luminaire luminous flux 4336lm Rated input power 39W
220V-240V AC 50/60Hz / DC Not Dimmable
h(m)
2 4 6 8 10
100° 3000K Ø(m) E(lx)
4.78 479 9.57 120 14.35 53 19.14 30 23.92 19
C0 100°
180°
57 215
45
35°
405 405 405

STAGE
Asymmetrical optic
S.1205W
MID-POWER LEDs 3000K CRI80 10150lm Rated luminaire luminous flux 7409lm Rated input power 84W
220V-240V AC 50/60Hz Not Dimmable
h(m) E(lx) 10 11 8 20 6 45 4 116 2 116
3000K 10 18 38 80
60 16 2 4
C0 19°+36° C90 104°
8 6 13 8 22 12 32 14
3 m
0
5
6 (m)
180°
57 300
Symmetrical optic
S.1210W
6 COB LEDs 3000K CRI80 12600lm
Rated luminaire luminous flux 8565lm Rated input power 100W
220V-240V AC 50/60Hz Not Dimmable
S.1212W
6 COB LEDs 3000KCRI80 12600lm Rated luminaire luminous flux 8655lm Rated input power 100W
220V-240V AC 50/60Hz Not Dimmable
h(m)
4 8 12 16 20
h(m)
4 8 12 16 20
19° Ø(m)
1.38 2.76 4.15 5.35 6.91
37° Ø(m)
2.71 5.42 8.12 10.83 13.54
3000K E(lx)
3046 762 338 190 122
3000K E(lx)
1178 295 131 74 47
C0 19°
C0 37°
180°
57 300
Symmetrical optic
S.1200W
1 COB LED 3000K CRI80 15350lm
Rated luminaire luminous flux 14289lm Rated input power 115W
220V-240V AC 50/60Hz Not Dimmable
h(m)
4 8 12 16 20
100° Ø(m)
9.60 19.20 28.81 38.41 48.01
3000K E(lx)
383 96 43 24 15
C0 100°
180°
57 300
46
30°
470 470 470

MEGASTAGE
Asymmetrical optic
S.1235W
MID-POWER LEDs 3000K CRI80 19905lm Rated luminaire luminous flux 13812lm Rated input power 147W
220V-240V AC 50/60Hz Not Dimmable
h(m) 10 8
6 4 2
E(lx) 3000K 18 17 36 32 85 70
221 150 272 140
13 10 23 15 44 24 64 27 37 12
C0 23°+28° C90 108°
3 m
0
2 4
6 (m)
180°
60 380
Symmetrical optic
180°
60 380
S.1236W
12 COB LEDs 3000K CRI80 19524lm
Rated luminaire luminous flux 15007lm Rated input power 142W
220V-240V AC 50/60Hz Not Dimmable
S.1237W
12 COB LEDs 3000K CRI80 19524lm Rated luminaire luminous flux 15643lm Rated input power 142W
220V-240V AC 50/60Hz Not Dimmable
h(m)
4 8 12 16 20
h(m)
19° Ø(m)
1.38 2.76 4.15 5.35 6.91
35° Ø(m)
3000K E(lx)
5461 1365 607 341 218
3000K E(lx)
2260 565 251 141 90
C0 19°
C0 35°
4 2.55 8 5.11 12 7.66
16 20
10.21 12.77
Symmetrical optic
S.1230W
4 COB LEDs 3000K CRI80 26484lm
Rated luminaire luminous flux 23204lm Rated input power 189W
220V-240V AC 50/60Hz / DC Not Dimmable
h(m)
4 8 12 16 20
107°x108° 3000K Ø(m) E(lx)
10.85 605 21.70 151 32.55 67 43.40 38 54.25 24
C0 107°x108°
180°
60 380
47
36°
540 540 540

48

Streamline
Adjustable Projector
Streamline projector has been designed to illuminate with grazing light walls and facades creating a diffused light effect, thanks to its high luminous flux. Streamline’s thin and compact shape discreetly talks together with the context in which it integrates. Its comfortable optics along with the dimming device complete the features of this exterior luminaire, that ensures high performances and flexibility in terms of applications.
2018
www.simes.it/streamline 49

STREAMLINE Adjustable Projector
50
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Clear toughened glass diffuser. Stainless steel screws.
Luminaire supplied with 1m of cable (Ministreamline).
Luminaire with double cable entry and cable glands (Streamline).
Silicone gaskets.
Double powder paint.
Colour:
Aluminium grey (code 14)
Protection class
IP65
Isolation class
CLASS I y Mechanical resistance
IK 07
Leds 4000K CRI80 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
The sophisticated optics focuses the beam and makes the light comfortable by reducing the direct glare of the light source.

STREAMLINE Adjustable Projector Ministreamline Comfort Optic
420 44
295
Ministreamline Asymetric Optic
S.1245W
HIGH-POWER LEDs 3000K CRI90 3300lm
Rated luminaire luminous flux 2399lm Rated input power 32,4W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1246W
HIGH-POWER LEDs 3000K CRI90 3300lm Rated luminaire luminous flux 2228lm Rated input power 32,4W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 66° and 10°x40°
S.1247W
MID-POWER LEDs 3000K CRI80 2880lm Rated luminaire luminous flux 1806lm Rated input power 20,3W
220V-240V AC 50/60Hz / DC Not Dimmable
12° 3000K h(m) Ø(m) E(lx)
12°
2 4 6 8 10
0.40 9974 0.80 2493 1.20 1108 1.60 623 2.00 399
31° 3000K h(m) Ø(m) E(lx)
2 1.18 1579 4 2.35 395 6 3.53 175 8 4.71 99 10 5.89 63
h(m) E(lx) 51110 42210 36521 2 22 13 4 1 1 199 34 2 0
0 1 2 3(m)
31°
=5°
C0 C90 10°+40° 94°
Streamline Comfort Optic
977 44
770
Streamline Asymetric Optic
S.1255W
HIGH-POWER LEDs 3000K CRI90 7920lm
Rated luminaire luminous flux 5235lm Rated input power 74W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1256W
HIGH-POWER LEDs 3000K CRI90 7920lm Rated luminaire luminous flux 4904lm Rated input power 74W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 66° and 10°x40°
S.1257W
MID-POWER LEDs 3000K CRI80 7200lm Rated luminaire luminous flux 4274lm Rated input power 59W
220V-240V AC 50/60Hz / DC Not Dimmable
12° 3000K h(m) Ø(m) E(lx)
12°
2 4 6 8 10
0.41 20415 0.81 5104 1.22 2268 1.63 1276 2.03 817
31°
31° 3000K h(m) Ø(m) E(lx)
2 1.12 3639 4 2.25 910 6 3.37 404 8 4.50 227 10 5.62 146
h(m) E(lx) 52211 43321 37742 2281862 12005551
0 1 2 3(m)
=5°
C0 C90 10°+40° 94°
51
170
170

52

Twist
Adjustable projector
The Twist projectors cover a wide range of project applications and gives multiple solutions with different lighting effects . Developed from the same concept of KEEN and MOVIT this new projector is characterized by a special adjustable base combined with a series of optics and reflectors that allow for infinite lighting solutions that can satisfy the most difficult project requirements. Available in two sizes , Twist can be wall and ceiling mounted or pole and floor mounted together with a pole bracket or ground stake.
Design K.Begasse
www.simes.it/twist 53

TWIST Adjustable projector
MAINA Headquarter Arch. Gianni Arnaudo, Fossano, Cuneo, Italy © Ph.Mario Bertani
S.3049
ACCESSORY STAKE FOR MINITWIST
In polypropylene
Colour: black (code .09)
S.3079
ACCESSORY STAKE FOR TWIST In polypropylene
Colour: black (code .09)
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Stainless steel screws.
Clear toughened glass diffuser. HI-GRADE aluminium reflectors (LED COB versions).
Luminaire supplied with 6m of cable. Silicone gaskets.
Double powder paint.
Protection class
IP65
Isolation class
CLASS I y
Mechanical resistance
IK 09 MINITWIST IK 07 TWIST
Leds 4000K CRI80 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
PATENT PENDING REGISTERED DESIGN
54
Colours:
White Aluminium grey
(code 01) (code 14)
430
260

TWIST
Minitwist spot
10°
32°
Minitwist flood
S.3015W
12 HIGH-POWER LEDs 3000K CRI90 2280lm
Rated luminaire luminous flux 2170lm Rated input power 27W
220V-240V AC 50/60Hz / DC Not Dimmable
S.3016W
12 HIGH-POWER LEDs 3000K CRI90 2280lm
Rated luminaire luminous flux 1840lm Rated input power 27W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 42°, 66° and 12°x40°
S.3018W
1 COB LED 3000K CRI80 2000lm
With symmetric reflector
Rated luminaire luminous flux 1934lm Rated input power 19,6W
220V-230V AC 50/60Hz Not Dimmable
h(m)
2 4 6 8 10
h(m)
2 4 6 8 10
h(m)
2 4 6 8 10
10° 3000K Ø(m) E(lx)
0.36 11887 0.73 2972 1.09 1321 1.46 743 1.82 475
32° 3000K Ø(m) E(lx)
1.15 1126 2.31 282 3.46 125 4.62 70 5.77 45
105°x106° 3000K Ø(m) E(lx)
4.90×5.35 196 10.50×10.69 49 15.75×16.04 22 21.00×21.39 12 26.25×26.73 8
C0 105° C90 106°
160
60
45
98
Twist spot
10°
34°
Twist flood
S.3065W
24 HIGH-POWER LEDs 3000K CRI90 3985lm
Rated luminaire luminous flux 3745lm Rated input power 47W
220V-240V AC 50/60Hz / DC Not Dimmable
S.3066W
24 HIGH-POWER LEDs 3000K CRI90 3985lm
Rated luminaire luminous flux 3430lm Rated input power 47W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 42°, 66° and 12°x40°
S.3068W
1 COB LED 3000K CRI90 4600lm With symmetric reflector
Rated luminaire luminous flux 3955lm Rated input power 42W
220V-240V AC 50/60Hz / DC Not Dimmable
47
h(m)
4 8 12 16 20
h(m)
4 8 12 16 20
h(m)
2 4 6 8 10
10° 3000K Ø(m) E(lx)
0.67 5713 1.34 1428 2.02 635 2.69 357 3.36 229
34° 3000K Ø(m) E(lx)
2.42 520 4.83 130 7.25 58 9.66 33 12.08 21
102°x102° 3000K Ø(m) E(lx)
4.90 439 9.81 110 14.71 49 19.62 27 24.52 18
C0 102° C90 102°
225
75
130
55
56 270 50 190

TWIST Pole mounted
MINITWIST and TWIST can be installed on poles (min ø60mm, max Ø300mm) using the pole adaptor.
S.3019
POLE ADAPTOR MINITWIST
56
S.3069
POLE ADAPTOR TWIST

57

58

Movit
Adjustable projector
MOVIT is a new extraordinary LED projector for ground or wall installation. It can be used as direct or indirect light and it’s also available with arm. MOVIT has elegant proportions and a smaller visual impact than traditional projectors, easy to install and available with asymmetric and symmetric reflector. It covers a wide range of applications and gives to all designers a high flexibility of use.
Design K.Begasse
www.simes.it/movit 59

MOVIT Adjustable projector
Die-cast EN AB-47100 aluminium housing and extruded EN AW-6060 aluminium structure (arm version) with high corrosion resistance.
Stainless steel screws.
Clear toughened glass diffuser. HI-GRADE aluminium reflectors. Luminaire supplied with 1,5m of cable (Movit Rectangular/Square 220mm). Pre-wired luminaire with neoprene cable and connector in the base (Movit Square 320mm).
Silicone gaskets.
Double powder paint.
Protection class
IP65
Isolation class
CLASS I y
Mechanical resistance
IK 09
IK 10 SQUARE 320 mm
For the latest technical information and luminaire updates with LED technology please refer to
www.simes.it
REGISTERED DESIGN
S.3049
ACCESSORY STAKE FOR MOVIT
SQUARE 220 mm and MOVIT RECTANGULAR 130mm
In polypropylene
Colour: black (code .09)
S.3079
ACCESSORY STAKE FOR MOVIT SQUARE 320 mm
In polypropylene
Colour: black (code .09)
60
Colours:
White Aluminium grey
(code 01) (code 14)
430
260

MOVIT Rectangular Rectangular symmetric optic
S.3005W h(m) MID-POWER LEDs 3000K CRI90 890lm 10
E(lx) 3000K
0.5 0.5 0.5 0.0 1.0 1.0 1.0 0.5 2.0 2.0 1.0 0.5 5.5 5.0 2.0 1.0
15 9.0 2.0 0.5
C0 103° C90 98°
Rated luminaire luminous flux 699lm
8
6 S.3005N 4
MID-POWER LEDs 4000K CRI90 900lm Rated luminaire luminous flux 707lm
Rated input power 9W
220V-240V AC 50/60Hz / DC Not Dimmable
S.3000W
MID-POWER LEDs 3000K CRI90 890lm Rated luminaire luminous flux 608lm
S.3000N
MID-POWER LEDs 4000K CRI90 900lm
Rated luminaire luminous flux 626lm
Rated input power 9W
220V-240V AC 50/60Hz / DC Not Dimmable
2
Rectangular asymmetric optic
34 130
3 m
0 2 4
6 (m)
h(m) 10 8
6 4 2
E(lx) 3000K
1.0 1.0 0.5 0.5 2.0 2.0 1.0 0.5 4.5 4.0 1.5 1.0
11 6.5 2.0 0.5 17 7.0 1.5 0.5
C0 34°+20° C90 80°
Rectangular with arm
34 130
S.3010W
MID-POWER LEDs 3000K CRI90 890lm Rated luminaire luminous flux 699lm
h(m) 10 8
6
E(lx) 3000K
0.5 0.5 0.5 0.0 1.0 1.0 1.0 0.5 2.0 2.0 1.0 0.5 5.5 5.0 2.0 1.0
15 9.0 2.0 0.5
MID-POWER LEDs 4000K CRI90 900lm Rated luminaire luminous flux 707lm
Rated input power 9W
220V-240V AC 50/60Hz / DC Not Dimmable
843
2
3 m
0 2 4
6 (m)
C0 103° C90 98°
S.3010N 4
3 m
0 2 4
6 (m)
61
54°
110 85 220 220
130 34

MOVIT Square 220 mm Square 220 mm symmetric optic
Square 220 mm asymmetric optic
Square 220 mm with arm
S.3055W h(m)
E(lx) 3000K
1.5 1.5 1.0 0.5 3.0 2.5 1.5 1.0 6.0 5.0 2.5 1.0
15 10 4.0 1.5 32 14 3.0 1.0
C0 108° C90 89°
10 8 6 S.3055N 4 2
MID-POWER LEDs 3000K CRI90 2185lm Rated luminaire luminous flux 1505lm
MID-POWER LEDs 4000K CRI90 2207lm Rated luminaire luminous flux 1561lm
Rated input power 20W
220V-240V AC 50/60Hz / DC Not Dimmable
S.3050W
MID-POWER LEDs 3000K CRI90 2185lm Rated luminaire luminous flux 1595lm
3 m
0 2 4
6 (m)
34 220
h(m) 10 8
E(lx) 3000K 3.0 2.5 5.0 4.5 12 10 25 17 34 17
0 2
2.0 1.0 3.0 2.0 5.0 2.5 7.0 2.0 4.0 1.0
C0 30°+22° C90 90°
6 S.3050N 4
MID-POWER LEDs 4000K CRI90 2207lm Rated luminaire luminous flux 1611lm
Rated input power 20W
220V-240V AC 50/60Hz / DC Not Dimmable
2
34 220
3 m
4
6 (m)
S.3060W
MID-POWER LEDs 3000K CRI90 2185lm Rated luminaire luminous flux 1505lm
h(m) 10 8
E(lx) 3000K 1.5 1.5 3.0 2.5 6.0 5.0 15 10 32 14
0 2
1.0 0.5 1.5 1.0 2.5 1.0 4.0 1.5 3.0 1.0
C0 108° C90 89°
6 S.3060N 4
MID-POWER LEDs 4000K CRI90 2207lm Rated luminaire luminous flux 1561lm
Rated input power 20W
220V-240V AC 50/60Hz / DC Not Dimmable
2
843
3 m
4
6 (m)
62
51°
110 85 220 220
220 34

MOVIT Square 320 mm Square 320 mm symmetric optic
S.3075W h(m)
MID-POWER LEDs 3000K CRI90 4573lm 10
E(lx) 3000K
4.0 4.0 3.5 2.5 9.0 8.0 5.5 3.5
18 14 9.0 4.0 37 25 10 4.0 422051.5
0 2 4 6 (m)
C0 116° C90 112°
Rated luminaire luminous flux 3915lm
8
6 S.3075N 4
MID-POWER LEDs 4000K CRI90 4618lm Rated luminaire luminous flux 4004lm
Rated input power 42W
220V-240V AC 50/60Hz / DC Not Dimmable
2 3 m
Square 320 mm asymmetric optic
40 320
S.3070W h(m)
E(lx) 3000K
3.5 3.5 2.5 2.0 7.0 6.0 4.5 3.0
15 12 7.0 4.5 3122126.5 6137114.0
0 2 4 6 (m)
C0 30°+22° C90 90°
MID-POWER LEDs 3000K CRI90 4573lm Rated luminaire luminous flux 2795lm
S.3070N
MID-POWER LEDs 4000K CRI90 4618lm
Rated luminaire luminous flux 2935lm
Rated input power 42W
220V-240V AC 50/60Hz / DC Not Dimmable
10 8 6 4 2
3 m
40 320
63
295
295
51°

MOVIT Pole mounted
MOVIT RECTANGULAR, MOVIT SQUARE 220 mm and MOVIT SQUARE 320 mm can be installed on the pole using the fixation accessory.
60
76
S.2843
Ø 60 mm CYLINDRICAL POLE WITH BASE
Pole total height 3500mm
60
S.2845
Ø 76 mm CYLINDRICAL POLE WITH BASE
Pole total height 4500mm Provided with inspection door
S.2842
Ø 60 mm CYLINDRICAL POLE TO BE BURIED
Pole total height 4000mm To be buried for 500mm
S.3046
ACCESSORY SINGLE
POLE MOUNTED Ø 60 mm
For 1 MOVIT RECTANGULAR 130mm or for 1 MOVIT SQUARE 220mm
S.3047
ACCESSORY DOUBLE
POLE MOUNTED Ø 60 mm
For 2 MOVIT RECTANGULAR 130mm or for 2 MOVIT SQUARE 220mm
S.3044
ACCESSORY SINGLE
POLE MOUNTED Ø 60-76 mm For 1 MOVIT SQUARE 320mm
S.3045
ACCESSORY DOUBLE
POLE MOUNTED Ø 60-76 mm For 2 MOVIT SQUARE 320mm
S.2849
PLANTED ROOT FOR S.2843 / S.2845
h=470mm and bolts in galvanized steel with M16 threads.
76
S.2844
Ø 76 mm CYLINDRICAL POLE TO BE BURIED
Pole total height 5000mm
To be buried for 500mm Provided with inspection door
64
500 4500 500 3500 4500 3500

65

66

Outline
Adjustable projector
A basic and sophisticated design created for a lighting system that shapes the space with a distinctive, clean and tasteful style. Whether as pole, wall or floor mounted, Outline enhances the expressivity of pure aluminium through minimal and simple lines that illuminate space and reveal its true potential.
Thanks to its high resistance to oxidation and double painting process, Outline projector combines functionality and architectural expressiveness by lighting the space with natural charm.
Design K.Begasse
www.simes.it/outline 67

OUTLINE Adjustable projector
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Stainless steel screws.
Clear toughened glass diffuser 5mm thick.
HI-GRADE aluminium reflectors for OUTLINE FLOOD.
Concentrating or diffusing lenses for OUTLINE SPOT.
Pre-wired luminaire with neoprene cable and connector.
Silicone gaskets.
Double powder paint.
Protection class
IP65
Isolation class
CLASS I y Mechanical resistance
IK 08
Leds 4000K versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
S.3079
ACCESSORY STAKE FOR OUTLINE In polypropylene
Colour: black (code .09)
S.5504
3 way connector for through wiring (in/out).
To install inside the fixing base.
68
Colour:
Aluminium grey
(code 14)
430

OUTLINE
Outline spot
10°
29°
270 52
160
Outline flood
270 52
160
S.3100W
28 HIGH-POWER LEDs 3000K CRI90 5500lm Rated luminaire luminous flux 4461lm
Rated input power 61W
220V-240V AC 50/60Hz / DC Not Dimmable
S.3101W
28 HIGH-POWER LEDs 3000K CRI90 5500lm Rated luminaire luminous flux 4336lm
Rated input power 61W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 42°
S.3105W
MID-POWER LEDs 3000K CRI80 5500lm Rated luminaire luminous flux 4420lm Rated input power 46W
220V-240V AC 50/60Hz / DC Not Dimmable
10° 3000K h(m) Ø(m) E(lx)
4 0.73 5145 8 1.46 1286 12 2.18 572 16 2.91 322 20 3.64 206
29° 3000K h(m) Ø(m) E(lx)
4 2.05 1028 8 4.11 257 12 6.16 114 16 8.22 64 20 10.27 41
95°x105° 3000K h(m) Ø(m) E(lx)
2 4.38×5.23 431 4 8.76×10.46 108 6 13.14×15.70 48 8 17.52×20.93 27 10 21.90×26.16 17
C0 95° C90 105°
69
345 345

OUTLINE Pole mounted
60
76
S.2843
Ø 60 mm CYLINDRICAL POLE WITH BASE Pole total height 3500mm
OUTLINE can be installed on the pole using the fixation accessory.
60
S.2845
Ø 76 mm CYLINDRICAL POLE WITH BASE Pole total height 4500mm
Provided with inspection door
76
S.2842
Ø 60 mm CYLINDRICAL POLE TO BE BURIED Pole total height 4000mm
To be buried for 500mm
S.2844
Ø 76 mm CYLINDRICAL POLE TO BE BURIED Pole total height 5000mm
To be buried for 500mm
Provided with inspection door
S.3044
ACCESSORY SINGLE
POLE MOUNTED Ø 60-76 mm For 1 OUTLINE
S.3045
ACCESSORY DOUBLE
POLE MOUNTED Ø 60-76 mm For 2 OUTLINE
S.2849
PLANTED ROOT FOR S.2843 / S.2845
h=470mm and bolts in galvanized steel with M16 threads.
70
500 4500 500 3500 4500 3500

71

72
Megyeri bridge, Budapest, Hungary © Be light Kft.

Focus
Adjustable projector
The FOCUS projector range comes with essential characteristics of modern design; mechanical strength and resistance to aggressive environments; superior optical precision; absolute visual comfort; excellent light output; flexible lighting solutions; easy installation and maintenance.
www.simes.it/focus 73

NANOFOCUS Small adjustable projector
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Clear toughened glass 3 mm thick. Stainless steel screws.
Luminaire supplied with 5m of cable Silicone gaskets.
Double powdered paint.
For the latest technical information and product updates with LED technology please refer to the official website (www.simes.it)
Colour:
Anthracite grey (code 24)
Protection class
IP66
Isolation class
CLASS II
Mechanical resistance of diffusor
IK 06
Leds 4000K CRI90 versions are available on request.
REGISTERED DESIGN
Accessories
S.1109 VISOR
Colour: black (code 09)
S.1108
NANOFOCUS STRAP FOR APPLICATIONS ON TREES Black strap, length 40 cm
74

NANOFOCUS SPOT Ground stake

10°
34°
75 125
45° 45°
S.1100W
1 HIGH-POWER LED 3000K CRI90 204lm Rated luminaire luminous flux 153lm
Rated input power 2,6W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
S.1101W
1 HIGH-POWER LED 3000K CRI90 204lm Rated luminaire luminous flux 155lm
Rated input power 2,6W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
S.1102W
1 HIGH-POWER LED 3000K CRI90 204lm Rated luminaire luminous flux 153lm
Rated input power 2,6W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
3° 3000K h(m) Ø(m) E(lx)
1 0.05 13031 2 0.10 3258 3 0.16 1448 4 0.21 814 5 0.26 521
10° 3000K h(m) Ø(m) E(lx)
1 0.18 2680 2 0.36 670 3 0.55 298 4 0.73 168 5 0.91 107
34° 3000K h(m) Ø(m) E(lx)
1 0.62 417 2 1.24 104 3 1.86 46 4 2.48 26 5 3.10 17
NANOFOCUS SPOT Wall

10°
75 125
45° 45°
S.1103W
1 HIGH-POWER LED 3000K CRI90 204lm Rated luminaire luminous flux 153lm
Rated input power 2,6W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
S.1104W
1 HIGH-POWER LED 3000K CRI90 204lm Rated luminaire luminous flux 155lm
Rated input power 2,6W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
S.1105W
1 HIGH-POWER LED 3000K CRI90 204lm Rated luminaire luminous flux 153lm
Rated input power 2,6W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
Accessory pole mounted ø 60 / 76 mm
S.1107
NANOFOCUS SPOT can be installed on poles ø60mm, ø76mm using the fixation accessory.
3° 3000K h(m) Ø(m) E(lx)
1 0.05 13031 2 0.10 3258 3 0.16 1448 4 0.21 814 5 0.26 521
10° 3000K h(m) Ø(m) E(lx)
1 0.18 2680 2 0.36 670 3 0.55 298 4 0.73 168 5 0.91 107
34° 3000K h(m) Ø(m) E(lx)
1 0.62 417 2 1.24 104 3 1.86 46 4 2.48 26 5 3.10 17
59
360°
34°
ø60mm – ø76mm
75
140
250 300

76
FOCUS Adjustable projector
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. 99.98% pure aluminium reflectors. Clear toughened glass 5mm thick, 8mm Focus / Megafocus.
Stainless steel screws.
Luminaire with one single cable entry and cable gland (Microfocus). Luminaire with double cable entry and cable glands (Minifocus, Focus / Megafocus).
Focus projector with street optics: controlgear equipped with protections against discharges and high voltage spikes on the mains: 6kV differential mode (L-N), 8kV common mode (PE). Silicone gaskets.
Double powder paint.
Colour:
Protection class
IP66
Isolation class
CLASS I y
CLASS II q S.1076N
Mechanical resistance
Aluminium grey (code 14)
REGISTERED DESIGN
IK 09 (MICROFOCUS and MINIFOCUS) IK 10 (FOCUS and MEGAFOCUS)
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to
www.simes.it
Cirkelbroen (Circle Bridge), Copenhagen, Denmark – Olafur Eliasson © Anders Sune Berg

MICROFOCUS

228,5
S.1110W
1 COB LED 3000K CRI90 1850lm
Rated luminaire luminous flux 1150lm Rated input power 18W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1111W
1 COB LED 3000K CRI90 1850lm
Rated luminaire luminous flux 1038lm Rated input power 18W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1002 VISOR
Colour: black (code 09)
S.1004
STAKE FOR MICROFOCUS
In polypropylene
Colour: black (code .09)
The 100 mm upper part must stay out of the ground level, according with the norms.
S.1120W
1 COB LED 3000K CRI90 3690lm
Rated luminaire luminous flux 2301lm Rated input power 36W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1121W
7° 3000K h(m) Ø(m) E(lx)
2 0.25 8111 4 0.50 2028 6 0.75 901 8 1.01 507 10 1.26 324
31° 3000K h(m) Ø(m) E(lx)
2 1.10 749 4 2.20 187 6 3.31 83 8 4.41 47 10 5.51 30
31°
MINIFOCUS

33°
270 1 COB LED 3000K CRI90 3690lm Rated luminaire luminous flux 1893lm
Rated input power 36W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1022 VISOR
Colour: black (code 09)
S.1005
STAKE FOR MINIFOCUS
In polypropylene
Colour: black (code .09)
The 100 mm upper part must stay out of the ground level, according with the norms.
9° 3000K h(m) Ø(m) E(lx)
4 0.62 2958 8 1.23 740 12 1.85 329 16 2.46 185 20 3.08 118
33° 3000K h(m) Ø(m) E(lx)
4 2.40 293 8 4.80 73 12 7.20 33 16 9.60 18 20 12.00 12
77
430
280
115
72
190
135

FOCUS
S.1130W
1 COB LED 3000K CRI90 6685lm
Rated luminaire luminous flux 4302lm Rated input power 57W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1131W
1 COB LED 3000K CRI90 6685lm
Rated luminaire luminous flux 4391lm Rated input power 57W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1076N
36 HIGH-POWER LEDs 4000K CRI70 6200lm Rated luminaire luminous flux 3392lm
Rated input power 62W
220V-240V AC 50/60Hz / DC Not Dimmable With street optics
S.1031
WIDE LENS to install inside the fitting.
For versions:
57W from 32° to 44°
S.1030
ELLIPSOIDAL LENS to install inside the
fitting. For versions:
57W from 9° to 10°x53°
S.1032 VISOR
Colour: black (code 09)
S.1140W
1 COB LED 3000K CRI90 11627lm
Rated luminaire luminous flux 8393lm Rated input power 95W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1141W
1 COB LED 3000K CRI90 11627lm
Rated luminaire luminous flux 8132lm Rated input power 95W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1041
WIDE LENS to install inside the
fitting. For versions:
95W from 36° to 45°
S.1040
ELLIPSOIDAL LENS to install inside the fitting. For versions:
95W from 10° to 12°x60°
S.1042
VISOR
Colour: black (code 09)
h(m)
4 8 12 16 20
h(m)
4 8 12 16 20
9° 3000K Ø(m) E(lx)
0.64 5392 1.29 1348 1.93 599 2.57 337 3.22 216
32° 3000K Ø(m) E(lx)
2.28 742 4.56 185 6.84 82 9.12 46 11.39 30

32°
H=
5.0 m
lux
380
MEGAFOCUS
10°
36°
500
h(m)
4 8 12 16 20
h(m)
4 8 12 16 20
10° 3000K Ø(m) E(lx)
0.69 8767 1.37 2192 2.06 974 2.74 548 3.43 351
36° 3000K Ø(m) E(lx)
2.61 1141 5.23 285 7.84 127 10.46 71 13.07 46
78
= 33°
195
160
385
290

FOCUS Pole mounted
MINIFOCUS, FOCUS and MEGAFOCUS can be installed on poles using the pole adaptor.
60 60
76 76
S.2842
Ø 60 mm CYLINDRICAL POLE TO BE BURIED
Pole total height 4000mm To be buried for 500mm
S.2843
Ø 60 mm CYLINDRICAL POLE WITH BASE
Pole total height 3500mm
S.2844
Ø 76 mm CYLINDRICAL POLE TO BE BURIED
Pole total height 5000mm
To be buried for 500mm Provided with inspection door
S.2845
Ø 76 mm CYLINDRICAL POLE WITH BASE
Pole total height 4500mm Provided with inspection door
S.2826
Ø 120 mm CYLINDRICAL POLE
TO BE BURIED
Pole total height 4800mm
To be buried for 600mm
Provided with inspection door and terminal board.
S.2846
Ø 120 mm CYLINDRICAL POLE
WITH BASE
Pole total height 4200mm
Provided with inspection door and terminal board.
S.2848
Ø 120 mm CYLINDRICAL POLE
WITH BASE
Pole total height 6000mm
Provided with inspection door and terminal board.
S.2849
PLANTED ROOT FOR S.2843 / S.2845
and bolts in galvanized steel with M16 threads.
S.2840
PLANTED ROOT FOR S.2846 / S.2848 and bolts in galvanized steel with
M16 threads.
S.1016
FLANGE FOR POLE Ø 60 mm INSTALLATION
Flange in die-cast aluminium for MINIFOCUS and FOCUS, suitable only for Ø 60mm poles. The flange can be used for maximum 2 projectors, one for each side.
To install the flange on Ø 76mm pole the screws kit SACVITFOCTOWER2 must be purchased separately.
120
120 120
S.1013
FLANGE FOR POLE Ø 120 mm INSTALLATION
Flange in die-cast aluminium for MINIFOCUS, FOCUS and MEGAFOCUS, suitable only for Ø 120 mm poles.
The flange can be used for maximum 2 projectors, one for each side.
FLANGE FOR POLE Ø 102 mm available on request.
79
600
4200
4200
500
4500 500
3500
6000
4500
3500

80

Techno
Adjustable projector
TECHNO range includes spot and flood projectors, available in different dimensions and versions. TECHNO SPOT is suitable for the illumination of three-dimensional objects, trees, statues. All TECHNO luminaires can be supplied with accessories to assure different lighting solutions: objects can be illuminated precisely by limiting the light dispersion through wide or ellipsoidal beam lenses.
www.simes.it/techno
81

82
TECHNO Adjustable projector
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. 99.98% pure aluminium reflectors (Minitechno Rectangular).
Reflector in polymers covered with 99.98% pure aluminium (Minitechno Spot / Techno Spot).
Clear toughened glass 4 mm thick. Stainless steel screws.
Luminaire with one single cable entry and grommet (Microtechno Spot). Luminaire with one single cable entry and cable gland (Minitechno / Techno Spot).
Luminaire with double cable entry and cable glands (Minitechno Rettangolare).
Silicone gaskets.
Double powder paint.
Colours:
Aluminium grey (code 14) Anthracite grey (code 24)
Protection class
IP65
Isolation class
CLASS I y CLASS II
(Minitechno Rectangular)
“Masseria Ciura”, Massafra, Italy © Arch. Giampaolo Bianco
Mechanical resistance
IK 06 (Microtechno / Minitechno Spot)
IK 08 (Techno Spot / Minitechno Rectangular)
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it

MICROTECHNO Spot
10°
23°
Ø 95
120
Ø 95
S.3595W
3 HIGH-POWER LEDs 3000K CRI90 315lm Rated luminaire luminous flux 226lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable
S.3594W
3 HIGH-POWER LEDs 3000K CRI90 315lm Rated luminaire luminous flux 182lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 33°
S.3523
VISOR
in die-cast aluminium.
To be installed instead of the aluminium ring holder.
S.3524
STAKE in polypropylene.
Colour: black (code 09)
Length 270 mm
The 90 mm upper part must stay out of the ground level, according with the norms.
S.3564W
1 COB LED 3000K CRI90 2000lm
Rated luminaire luminous flux 1643lm Rated input power 21W
220V-240V AC 50/60Hz / DC Not Dimmable
S.3565W
1 COB LED 3000K CRI90 2000lm
Rated luminaire luminous flux 1583lm Rated input power 21W
220V-240V AC 50/60Hz / DC Not Dimmable
S.3553
VISOR
in die-cast aluminium.
To be installed instead of the aluminium ring holder.
S.3554
STAKE in polypropylene.
Colour: black (code 09)
Length 420 mm
The 90 mm upper part must stay out of the ground level, according with the norms.
10° 3000K h(m) Ø(m) E(lx)
1 0.19 4605
2 0.38 1151
3 0.57 512
4 0.76 288
5 0.95 184
23° 3000K
h(m) Ø(m) E(lx)
1 0.41 924
2 0.81 231
3 1.22 103
4 1.63 58
5 2.03 37
MINITECHNO Spot
11°
59°
130
145
188
S.3504
WIDE BEAM LENS
It enlarges the standard beam:
21W from 59° to 58°
S.3502
ELLIPSOIDAL BEAM LENS
It modifies the standard beam: 21W from 11° to 12°x56°
11° 3000K h(m) Ø(m) E(lx)
1 0.20 19084
2 0.39 4771
3 0.59 2120
4 0.78 1193
5 0.98 763
59° 3000K
h(m) Ø(m) E(lx)
1 1.13 1845 2 2.26 461 3 3.39 205 4 4.53 115 5 5.66 74
83
420
270
235
Ø 110
Ø 81
180

TECHNO Spot
10°
36°
Ø 210
215
Ø 210
S.3503
WIDE BEAM LENS
It enlarges the standard beam: 37W from 36° to 53°
S.3505
ELLIPSOIDAL BEAM LENS
It modifies the standard beam: 37W from 10° to 10°x66°
S.3511W
1 COB LED 3000K CRI90 4200lm Rated luminaire luminous flux 2703lm Rated input power 37W
220V-240V AC 50/60Hz Not Dimmable
S.3515W
1 COB LED 3000K CRI90 4200lm Rated luminaire luminous flux 2319lm Rated input power 37W
220V-240V AC 50/60Hz Not Dimmable
S.3552 VISOR
in die-cast aluminium.
S.3554
STAKE in polypropylene.
Colour: black (code 09)
The 90 mm upper part must stay out of the ground level, according with the norms.
10° 3000K h(m) Ø(m) E(lx)
4 0.67 3079 8 1.34 770 12 2.02 342 16 2.69 192 20 3.36 123
36° 3000K h(m) Ø(m) E(lx)
4 2.61 270 8 5.23 67 12 7.84 30 16 10.46 17 20 13.07 11
MINITECHNO Rectangular flood
215 125
S.3761W
1 COB LED 3000K CRI90 3300lm
Rated luminaire luminous flux 2740lm Rated input power 36W
220V-240V AC 50/60Hz / DC Not Dimmable
S.3781
VISOR for MINITECHNO RECTANGULAR FLOOD
in painted steel with die-cast aluminium ring holder.
To be installed instead of the aluminium ring holder.
102°x102°
h(m) Ø(m) E(lx)
2 4.90 280 4 9.81 70 6 14.71 31 8 19.62 18 10 24.52 11
C0 102° C90 102°
84
370
420
355
Ø 190

85
Rosen Europe headquarter, Oldenzaal, the Netherlands © Fagerhult NL

86

Loft spot
Adjustable projector
Loft Spot is a minimal and essential projector able to fit discreetly into any space.
The perfect control of the beam allows for a precise and functional lighting design. Available in two different sizes with narrow or wide beam, Loft allows to play with light and to enhance the most difficult context.
www.simes.it/loft-spot 87

88
LOFT SPOT Adjustable projector
Galleria Arte Moderna, Pordenone, Italy © ph. Elio e Stefano Ciol
S.1004
STAKE FOR MINILOFT and LOFT SLIM
In polypropylene
Colour: black (code .09)
The 100 mm upper part must stay out of the ground level, according with the norms.
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Stainless steel screws.
Clear toughened glass diffuser. Luminaire with one single cable entry and cable gland (Miniloft / Loft). Silicone gaskets.
Double powder paint.
Protection class
IP65
Isolation class
CLASS I y
CLASS II q Microloft
Mechanical resistance
IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
Colours:
White
Aluminium grey (code .14)
(code .01)
280

LOFT SPOT
Miniloft spot
110
S.6665W
3 HIGH-POWER LEDs 3000K CRI90 426lm
Rated luminaire luminous flux 324lm
Rated input power 6W
220V-240V AC 50/60Hz / DC Not Dimmable
S.6664W
3 HIGH-POWER LEDs 3000K CRI90 426lm Rated luminaire luminous flux 329lm
Rated input power 6W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 34°
S.6643W
5 HIGH-POWER LEDs 3000K CRI90 1285lm Rated luminaire luminous flux 1112lm
Rated input power 17,7W
220V-240V AC 50/60Hz / DC Not Dimmable
S.6649W
9° 3000K h(m) Ø(m) E(lx)

1 2 3 4 5
0.16 7297 0.33 1824 0.49 811 0.66 456 0.82 292
22° 3000K h(m) Ø(m) E(lx)
1 0.40 1860
2 0.79 465
3 1.19 207
4 1.58 116
5 1.98 74
22°
Loft slim spot

29°
80 5 HIGH-POWER LEDs 3000K CRI90 1285lm Rated luminaire luminous flux 1032lm
Rated input power 17,7W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 38°, 58° and 10°x40°
8° 3000K h(m) Ø(m) E(lx)
2 0.29 8556 4 0.59 2139 6 0.88 951 8 1.17 535 10 1.47 342
29° 3000K h(m) Ø(m) E(lx)
2 1.04 996 4 2.08 249 6 3.13 111 8 4.17 62 10 5.21 40
89
235
207
155
110

Inground recessed Walk-over
Nanoled 92 Plano 102 Compact 108 Zip 114 Stainless Steel
Surface mounted up-light
90
Over-all 134 Concrete up-light 12

Continuous line 138 Miniround 142 Linear Walk-over 146 Minilinear
91

92

Ø 60mm Ø 85mm
Downlight
Nanoled Stainless steel
Walk-over, wall recessed and downlight
Nanoled Stainless steel is a walk-over in-ground, wall recessed and ceiling luminaire providing either well defined accent lighting or evocative markers. The main feature of this in-ground luminaire is its extremely reduced dimensions (from 30mm to 85mm diameter versions). The lighting body is completely manufactured in 316L stainless steel to ensure an, increased corrosion resistance and has no visible screws. Reduced energy consumption and very high lighting performances accomplish the profile of this extraordinary recessed spotlight for the exterior.
Ø 30mm Ø 45mm Ø 60mm Ø 85mm
Wall recessed
Ø 45mm
Ø 60mm
Ø 85mm
Walk-over
www.simes.it/nanoled 93

94
Bagers Bro – Malmö, Sweden © Lokal XXX Arkitekter, Fagerhult AB, ph. Björn Tegnell
NANOLED STAINLESS STEEL Walk-over
Body made of AISI 316L monoblock stainless steel.
Toughened trasparent or acid-etched glass. Luminaire hard wired with neoprene cable 5m with cable gland.
Absence of screws (the luminaire is fixed to the recessing box with O-rings). Recessing box in polypropylene (walkover and wall recessed versions).
Maximum weight 500 Kg
Protection class
IP65 / IP67
Isolation class
CLASS III  Mechanical resistance
IK 08
Power supply not included.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
Finishing:
Stainless steel
(code 19)

NANOLED STAINLESS STEEL Walk-over Ø 30 mm
Acid – Etched Glass
Lens
Ø 30
Ø 125
S.3301W.19 h(m)
1 HIGH-POWER LED 3000K CRI90 31lm 2.5 0.0 2.0 0.0
E(lx) 4000K
S.3301N.19
1 HIGH-POWER LED 4000K CRI90 34lm
1.5 0.0 1.0 0.5 0.5 1.5
0.1m 0(m)
E(lx) 3000K
88°
88° 0.0 0.0 0.0 0.5 2.0
0(m)
88°
Computer-simulated photometrics
Rated input power 0,5W 24V DC
Require constant voltage remote power supply (page 468-469)
S.3305W.19
1 HIGH-POWER LED 3000K CRI90 31lm
h(m)
5.0 0.0 4.0 0.0
E(lx) 4000K

S.3305N.19 3.0 0.5
0.0 0.5 2.0
11.0 0(m)
1 HIGH-POWER LED 4000K CRI90 34lm Computer-simulated photometrics
2.0 1.5 1.0 10.0
0.1m 0(m)
E(lx) 3000K
9° 0.0

Rated input power 0,5W 24V DC
Require constant voltage remote power supply
S.3306W.19
1 HIGH-POWER LED 3000K CRI90 31lm
S.3306N.19
1 HIGH-POWER LED 4000K CRI90 34lm
h(m)
2.5 0.0 2.0 0.0 1.5 0.5 1.0 2.5 0.5 16.0
0.1m 0(m)
E(lx) 4000K
E(lx) 3000K
29° 0.0
29°
29°
NANOLED STAINLESS STEEL Walk-over Ø 45 mm Acid – Etched Glass
Computer-simulated photometrics
Rated input power 0,5W 24V DC
Require constant voltage remote power supply (page 468-469)
T 40°C
0.0 0.5 3.0
18.0 0(m)
S.3330W.19 h(m)
E(lx) 3000K
E(lx) 4000K
88°
1 HIGH-POWER LED 3000K CRI90 62lm 2.5 0.0 2.0 0.0
88° 0.0 0.0 0.0 0.5 3.5
0(m)
88°
Lens
Ø 45
Ø 125
Computer-simulated photometrics
Rated input power 1W 24V DC
Require constant voltage remote power supply (page 468-469)
S.3340W.19
1 HIGH-POWER LED 3000K CRI90 62lm
h(m)
5.0 0.0 4.0 0.5
E(lx) 4000K
S.3330N.19
1 HIGH-POWER LED 4000K CRI90 68lm
1.5 0.0 1.0 0.5 0.5 3.0
0.1m 0(m)

E(lx) 3000K
9° 0.0

S.3340N.19 3.0 1.0
0.5 1.0 3.5
20.0 0(m)
1 HIGH-POWER LED 4000K CRI90 68lm Computer-simulated photometrics
2.0 3.0 1.0 19.0
0.1m 0(m)
Rated input power 1W 24V DC
Require constant voltage remote power supply
S.3364W.19
1 HIGH-POWER LED 3000K CRI90 62lm
S.3364N.19
1 HIGH-POWER LED 4000K CRI90 68lm
h(m)
2.5 0.0 2.0 0.5 1.5 1.0 1.0 4.0 0.5 28.0
0(m)
E(lx) 4000K
E(lx) 3000K
29° 0.0
29°
29°
Computer-simulated photometrics
Rated input power 1W 24V DC
Require constant voltage remote power supply (page 468-469)
T 40°C
0.5 1.0 4.5
30.0 0(m)
0.1 m
95
125
125

NANOLED STAINLESS STEEL Walk-over Ø 60 mm Acid – Etched Glass
S.3300W.19
1 HIGH-POWER LED 3000K CRI90 115lm
S.3300N.19
1 HIGH-POWER LED 4000K CRI90 127lm
0.1m
0.1m
h(m)
2.5 0.0 2.0 0.0 1.5 0.0 1.0 1.0 0.5 6.0
0(m)
E(lx) 4000K
E(lx) 3000K
88° 0.0
88°
88°
Lens (page 468-469) S.3310W.19
h(m)
5.0 0.5 4.0 1.0 3.0 2.0 2.0 6.0 1.0 36.0
E(lx) 4000K
Computer-simulated photometrics
Rated input power 2,2W 24V DC
Require constant voltage remote power supply
0.0 0.0 1.0 6.5
0(m)

1 HIGH-POWER
S.3310N.19
1 HIGH-POWER
S.3384W.19
1 HIGH-POWER
S.3384N.19
1 HIGH-POWER
LED 3000K CRI90 115lm LED 4000K CRI90 127lm
LED 3000K CRI90 115lm LED 4000K CRI90 127lm
E(lx) 3000K
9° 0.5

h(m)
2.5 0.5 2.0 1.0 1.5 2.0 1.0 8.0 0.5 55.0
0(m)
E(lx) 4000K
0(m) E(lx) 3000K
1.0 2.5 7.0
40.0 0(m)
29°
Ø 60
Ø 125
Computer-simulated photometrics
Rated input power 2,2W 24V DC
Require constant voltage remote power supply (page 468-469)
T 40°C
29° 0.5 1.0 2.5 9.0 61.0
0(m)
29°
NANOLED STAINLESS STEEL Walk-over Ø 85 mm Acid – Etched Glass
0.1m
S.3311W.19
1 HIGH-POWER LED 3000K CRI90 257lm
S.3311N.19
1 HIGH-POWER LED 4000K CRI90 283lm
h(m)
2.5 0.0 2.0 0.0 1.5 0.5 1.0 1.5 0.5 13.0
0(m)
E(lx) 4000K
E(lx) 3000K
88° 0.0
88°
88°
Lens
Ø 85
Ø 125
Reflector
S.3312W.19
1 HIGH-POWER LED 3000K CRI90 257lm
S.3312N.19
1 HIGH-POWER LED 4000K CRI90 283lm
S.3313W.19
1 HIGH-POWER LED 3000K CRI90 257lm
S.3313N.19
1 HIGH-POWER LED 4000K CRI90 283lm
0.1 m
0.1m
h(m)
5.0 1.5 4.0 3.0 3.0 7.0 2.0 19.0 1.0 76.0
E(lx) 4000K
Computer-simulated photometrics
Rated input power 4,5W 24V DC
Require constant voltage remote power supply
0.0 0.5 2.0
14.0 0(m)
E(lx) 3000K
9° 2.0


4.0
8.0 21.0 87.0
h(m)
2.5 2.0 2.0 4.0 1.5 9.0 1.0 32.0 0.5 168.0
0(m)
29° 2.5 4.5 10.0 34.0 185.0
0(m)
29°
0(m) E(lx) 3000K
0(m)
E(lx) 4000K
29°
Computer-simulated photometrics
Rated input power 4,5W 24V DC
Require constant voltage remote power supply (page 468-469)
S.3315W.19
1 COB LED 3000K CRI90 350lm
S.3315N.19
1 COB LED 4000K CRI90 375lm
Rated input power 3,0W 24V DC
Require constant voltage remote power supply (page 468-469)
T 40°C
0.1m
h(m)
2.5 1.5 2.0 3.0 1.5 7.5 1.0 27.0 0.5 218.0
E(lx) 4000K
E(lx) 3000K
34° 2.0
34°
34°
4.0
8.0 30.0 233.0
96
0.1m
0(m)
0(m)
125
125

NANOLED STAINLESS STEEL Walk-over Blade of light Ø 85 mm Walk over round Ø 85 mm
Blade of light
Ø 85
Ø 125
We recommend the use of 2 luminaires to illuminate properly the entire opening (see photo below)
S.3316W.19
1 HIGH-POWER LED 3000K CRI80 228lm
S.3316N.19
1 HIGH-POWER LED 4000K CRI80 238lm
Computer-simulated photometrics
Rated input power 2,5W 24V DC
With radial lens 90°x6°
Requires a remote constant voltage driver (page 468-469)
T 40°C
90°x6°
90°x6°
125

98
Galerie Teplice, Czech Republic © EXX s.r.o. Praha, ph. Petr Janžura
NANOLED STAINLESS STEEL Wall recessed
Body made of AISI 316L monoblock stainless steel.
Toughened trasparent with asimmetric comfort reflector with black painted finishing.
Luminaire hard wired with neoprene cable 5m with cable gland.
Absence of screws (the luminaire is fixed to the recessing box with O-rings). Recessing box in polypropylene.
Maximum weight 500 Kg
Protection class
IP65
Isolation class
CLASS III  Mechanical resistance
IK 08
Power supply not included.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
Finishing:
Stainless steel
(code 19)

NANOLED STAINLESS STEEL Wall recessed Wall recessed Ø 45 mm
C0 18°+19° C90 32°
95
Ø 32
Wall recessed Ø 60 mm
110
Ø 32
Wall Recessed Ø 85 mm
S.3354W.19
1 HIGH-POWER LED 3000K CRI90 62lm
S.3354N.19
1 HIGH-POWER LED 4000K CRI90 68lm
Computer-simulated photometrics
Rated input power 1W 24V DC
Require constant voltage remote power supply (page 468-469)
H=0.2 m
S.3374W.19
1 HIGH-POWER LED 3000K CRI90 115lm
S.3374N.19
1 HIGH-POWER LED 4000K CRI90 127lm
Computer-simulated photometrics
Rated input power 2,2W 24V DC
Require constant voltage remote power supply (page 468-469)
C0 18°+19° C90 32°
H=0.2 m
lux
lux
3000K
4
4
000K
3000K
000K
S.3317W.19
1 HIGH-POWER LED 3000K CRI90 257lm
S.3317N.19
1 HIGH-POWER LED 4000K CRI90 283lm
Computer-simulated photometrics
Rated input power 4,5W 24V DC
Require constant voltage remote power supply
C0 18°+19° C90 32°
H=0.2 m
lux
3000K
125 (page 468-469)
Ø 32
400
0K
99
=32°
=32°
=32°
Ø 85 Ø 60
Ø 45

100
NANOLED STAINLESS STEEL Downlight
Body made of AISI 316L monoblock stainless steel.
Toughened trasparent or acid-etched glass. Luminaire hard wired with neoprene cable 5m with cable gland.
Supplied with two clips which allow for easy installation in plasterboard ceilings, thickness must be 15÷30mm (downlight versions).
Maximum weight 500 Kg
Protection class
IP65
Isolation class
CLASS III  Mechanical resistance
IK 08
Power supply not included.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
Finishing:
Stainless steel
(code 19)
“Therasia Resort Sea & SPA”, Vulcano island, Italy © Simes

NANOLED STAINLESS STEEL Dowlight Ø 60 mm – Lens
29°
Ø 50
Ø 60
S.3321W.19
1 HIGH-POWER LED 3000K CRI90 115lm
S.3321N.19
1 HIGH-POWER LED 4000K CRI90 127lm
Computer-simulated photometrics
Rated input power 2W 24V DC
Require constant voltage remote power supply (page 468-469)
29° 3000K 4000K h(m) Ø(m) E(lx) E(lx)
0.4 0.20 1153 1574 0.8 0.41 288 393 1.2 0.61 128 175 1.6 0.82 72 98 2.0 1.02 46 63
Ø 85 mm – Reflector
Ø 60
Ø 85
S.3319W.19
1 COB LED 3000K CRI90 350lm
S.3319N.19
1 COB LED 4000K CRI90 375lm
Rated input power 3,0W 24V DC
Require constant voltage remote power supply (page 468-469)
34° 3000K 4000K h(m) Ø(m) E(lx) E(lx)
0.4 0.25 4018 4299 0.8 0.49 1004 1075 1.2 0.74 446 478 1.6 0.98 251 269 2.0 1.23 161 172
34°
101
15÷30
15÷30
85
85

102

Plano
Flush Walk-over
PLANO is a elegant range of in-ground luminaires that fulfill two important requirements: low surface temperature and flush with the floor. Such fitting is suitable for indoor as well as outdoor application and pedestrian areas, especially in those applications where we have people walking barefoot.
www.simes.it/plano 103

PLANO Flush Walk-over Die cast EN AB-44100 aluminium
housing with high corrosion resistance. Flush marine grade stainless steel
AISI 316L front trim 2 mm thick with interlocking clips system and absence of visible screws (stainless-steel versions). Toughened glass diffuser
6mm thick for Miniplano,
8mm thick for Plano,
8mm thick for Megaplano.
Stainless steel screws.
Pre-wired luminaire with neoprene cable and connector.
Recessing box in polypropylene with external edge in stainless steel. Silicone gaskets.
Double powder paint.
Maximum weight 1000 Kg
Protection class
IP65 / IP67
Isolation class
CLASS I y Mechanical resistance
IK 09
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
The recessing box must be placed at ground level.
20 cm drainage gravel must be used under the recessing box to allow easy water evacuation.
Connection to the main line has to be done into junction boxes.
S.5506
4 way connector for through wiring (in/out).
104

MINIPLANO FULL-GLASS Flush Walk-over Acid-etched glass
S.5434W
HIGH-POWER LED 3000K CRI90 140lm Rated luminaire luminous flux 35lm
Rated input power 3W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 37°C
S.5430W
3 HIGH-POWER LEDs 3000K CRI90 425lm Rated luminaire luminous flux 327lm
Rated input power 6W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
S.5438W
3 HIGH-POWER LEDs 3000K CRI90 425lm
Rated luminaire luminous flux 329lm
Rated input power 6W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Beam lenses available on request with no surcharge: 34°
T 37°C
h(m)
5.0 0.0 4.0 0.0 3.0 0.0 2.0 0.0 1.0 1.5
0(m)
E(lx) 3000K
90°
Semiacid-etched glass
Ø 120
Ø 165
0.1m
0.1m
0.1m
h(m)
5.0 4.0 4.0 7.0 3.0 17.0 2.0 53.0 1.0 260.0
E(lx) 3000K 9°

0(m)
22°
h(m)
5.0 1.0 4.0 1.5 3.0 4.5 2.0 16.0 1.0 126.0
E(lx) 3000K 22°
MINIPLANO STAINLESS-STEEL Flush Walk-over Acid-etched glass
with no visible screw
Semiacid-etched glass with no visible screw
Ø 120
Ø 165
S.5774W.19
HIGH-POWER LED 3000K CRI90 140lm Rated luminaire luminous flux 35lm
Rated input power 3W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 37°C
S.5770W.19
3 HIGH-POWER LEDs 3000K CRI90 425lm Rated luminaire luminous flux 327lm
Rated input power 6W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
S.5778W.19
3 HIGH-POWER LEDs 3000K CRI90 425lm Rated luminaire luminous flux 329lm
Rated input power 6W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Beam lenses available on request with no surcharge: 34°
T 37°C
h(m)
5.0 0.0 4.0 0.0 3.0 0.0 2.0 0.0 1.0 1.5
0(m)
0(m)
E(lx) 3000K
90°
0.1m
0.1m
0.1m
h(m)
5.0 4.0 4.0 7.0 3.0 17.0 2.0 53.0 1.0 260.0
E(lx) 3000K 9°

0(m) E(lx) 3000K
22°
h(m)
5.0 1.0 4.0 1.5 3.0 4.5 2.0 16.0 1.0 126.0
0(m)
22°
105
135 135

PLANO FULL-GLASS Flush Walk-over Acid-etched glass
S.5451W
HIGH-POWER LEDs 3000K CRI90 1200lm Rated luminaire luminous flux 317lm
Rated input power 10,1W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 35°C
S.5455W
5 HIGH-POWER LEDs 3000K CRI90 710lm
Rated luminaire luminous flux 590lm Rated input power 9,1W
220V-240V AC 50/60Hz Not Dimmable Adjustable ±10° optic
S.5444W
5 HIGH-POWER LEDs 3000K CRI90 710lm
Rated luminaire luminous flux 578lm Rated input power 9,1W
220V-240V AC 50/60Hz Not Dimmable Adjustable ±10° optic
Beam lenses available on request with no surcharge: 38°, 58° and 10°x44°
T 35°C
E(lx) 3000K
h(m)
5.0 0.0 4.0 0.0 3.0 0.0 2.0 0.5 1.0 3.0
0(m)
90°
Semiacid-etched glass
Ø 190
320 x 240
h(m)
10.0 2.5
8.0 5.0 6.0 12.0 4.0 33.0 2.0 120.0
0(m)
0.1m
E(lx) 3000K


0.1m
0.1m
h(m)
10.0 0.0
8.0 0.0 6.0 1.5 4.0 5.0 2.0 45.0
0(m)
E(lx) 3000K
28°
28°
PLANO STAINLESS-STEEL Flush Walk-over Acid-etched glass with
no visible screw
Semiacid-etched glass with no visible screw
Ø 190
320 x 240
h(m)
5.0 0.0 4.0 0.0 3.0 0.0 2.0 0.5 1.0 3.0
0(m)
S.5781W.19
HIGH-POWER LEDs 3000K CRI90 1200lm Rated luminaire luminous flux 317lm
Rated input power 10,1W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 35°C
S.5785W.19
5 HIGH-POWER LEDs 3000K CRI90 710lm
Rated luminaire luminous flux 590lm Rated input power 9,1W
220V-240V AC 50/60Hz Not Dimmable Adjustable ±10° optic
S.5784W.19
5 HIGH-POWER LEDs 3000K CRI90 710lm
Rated luminaire luminous flux 578lm Rated input power 9,1W
220V-240V AC 50/60Hz Not Dimmable Adjustable ±10° optic
Beam lenses available on request with no surcharge: 38°, 58° and 10°x44°
E(lx) 3000K
90°
0.1m

0.1m
0.1m
0(m) E(lx) 3000K
h(m)
10.0 2.5
8.0 5.0 6.0 12.0 4.0 33.0 2.0 120.0
h(m)
10.0 0.0
8.0 0.0 6.0 1.5 4.0 5.0 2.0 45.0
0(m)
28°
E(lx) 3000K

28°
106
T 35°C
100 100

MEGAPLANO FULL-GLASS Flush Walk-over Acid-etched glass
S.5460W
HIGH-POWER LEDs 3000K CRI90 945lm Rated luminaire luminous flux 377lm
Rated input power 11,10W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 35°C
S.5461W
9 HIGH-POWER LEDs 3000K CRI90 945lm Rated luminaire luminous flux 758lm
Rated input power 10,5W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±10° optic
S.5468W
9 HIGH-POWER LEDs 3000K CRI90 945lm
Rated luminaire luminous flux 753lm
Rated input power 10,5W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±10° optic
Beam lenses available on request with no surcharge: 38°, 58° and 10°x44°
T 35°C
h(m)
5.0 0.0 4.0 0.5 3.0 1.0 2.0 3.0 1.0 20.0
0(m)
90°
E(lx) 3000K
Semiacid-etched glass
0.1m

h(m)
10.0 3.0
8.0 6.0 6.0 15.0 4.0 43.0 2.0 150.0
0(m)
E(lx) 3000K

0.1m
0.1m
h(m)
10.0 0.5
8.0 1.0 6.0 2.0 4.0 6.0 2.0 52.0
0(m)
28°
E(lx) 3000K
Ø 260
325 x 325
28°
MEGAPLANO STAINLESS-STEEL Flush Walk-over Acid-etched glass with
no visible screw
Semiacid-etched glass with no visible screw
h(m)
5.0 0.0 4.0 0.5 3.0 1.0 2.0 3.0 1.0 20.0
0(m)
S.5790W.19
HIGH-POWER LEDs 3000K CRI90 945lm Rated luminaire luminous flux 377lm
Rated input power 11,10W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 35°C
S.5791W.19
9 HIGH-POWER LEDs 3000K CRI90 945lm Rated luminaire luminous flux 758lm
Rated input power 10,5W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±10° optic
S.5798W.19
9 HIGH-POWER LEDs 3000K CRI90 945lm
Rated luminaire luminous flux 753lm
Rated input power 10,5W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±10° optic
Beam lenses available on request with no surcharge: 38°, 58° and 10°x44°
E(lx) 3000K
90°
0.1m

h(m)
10.0 3.0
8.0 6.0 6.0 15.0 4.0 43.0 2.0 150.0
E(lx) 3000K

0.1m
0.1m
0(m) E(lx) 3000K
28°
h(m)
10.0 0.5
8.0 1.0 6.0 2.0 4.0 6.0 2.0 52.0
0(m)
28°
Ø 260
325 x 325
T 35°C
107
100 100

108

Compact
Walk-over
Super shallow in-ground fitting that keeps 115 mm recessing depth for all versions. It assures high precision in the optical control and homogenous light distribution on the facade. Even wall recessed applications of Compact give excellent results.
www.simes.it/compact 109

COMPACT Walk-over Die cast EN AB-44100 aluminium housing
with high corrosion resistance.
Marine grade stainless steel AISI 316L front trim 2 mm thick.
Toughened glass diffuser
12mm thick for Compact 200,
12mm thick for Compact 275,
15mm thick for Compact 370.
Pre-wired luminaire with neoprene cable and connector.
Stainless steel screws.
Recessing box in polypropylene arranged for cable entries in all 4 sides.
Silicone gaskets.
Double powder paint.
Maximum weight 1000 Kg
Protection class
IP65 / IP67
Isolation class
CLASS I y
Mechanical resistance of glass
IK 09
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
Yuri Gagarin memorial, Moscow, Russia © ph. Hans-Christoph Brinkschmidt
The recessing box must be placed at ground level.
30 cm drainage gravel must be used under the recessing box to allow easy water evacuation.
Connection to the main line has to be done into junction boxes.
S.5506
4 way connector for through wiring (in/out).
110
Finishing:
Stainless steel
(code 19)

COMPACT ø 200 mm Acid – etched glass
Semiacid – etched glass
Ø 200
320 x 240
COMPACT ø 275 mm Acid – etched glass
S.5181W.19
HIGH-POWER LEDs 3000K CRI90 1200lm Rated luminaire luminous flux 317lm
Rated input power 10,1W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 35°C
S.5185W.19
5 HIGH-POWER LEDs 3000K CRI90 710lm Rated luminaire luminous flux 590lm
Rated input power 9,1W
220V-240V AC 50/60Hz Not Dimmable Adjustable ±10° optic
0.1 m
h(m) 5.0 4.0 3.0 2.0 1.0
h(m) 10.0 8.0 6.0 4.0 2.0
E(lx) 3000K 0.0
0.0
0.0
0.5 3.0
0(m)
E(lx) 3000K 2.5
5.0
12.0
33.0 120.0
0(m)
E(lx) 3000K 0.0
0.0
1.5
5.0 45.0
0(m)
90°

0.1 m S.5178W.19 h(m)
28°
5 HIGH-POWER LEDs 3000K CRI90 710lm Rated luminaire luminous flux 578lm
Rated input power 9,1W
220V-240V AC 50/60Hz Not Dimmable Adjustable ±10° optic
Beam lenses available on request with no surcharge: 38°, 58° and 10°x44°
T 35°C
10.0 8.0 6.0 4.0 2.0
0.1 m
S.5128W.19 h(m)
E(lx) 3000K 0.0
0.5
1.0
3.0 20.0
0(m)
E(lx) 3000K
90°
Semiacid – etched glass
Ø 275
S.5121W.19 h(m)
HIGH-POWER LEDs 3000K CRI90 945lm Rated luminaire luminous flux 377lm
Rated input power 11,10W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 35°C
5.0 4.0 3.0 2.0 1.0
0.1 m

9 HIGH-POWER LEDs 3000K CRI90 945lm Rated luminaire luminous flux 758lm
Rated input power 10,5W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±10° optic
S.5120W.19
9 HIGH-POWER LEDs 3000K CRI90 945lm Rated luminaire luminous flux 753lm
Rated input power 10,5W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±10° optic
Beam lenses available on request with no surcharge: 38°, 58° and 10°x44°
T 35°C
10.0 3.0 8.0 6.0 6.0 15.0 4.0 43.0 2.0 150.0
0(m)

0.1 m
0.1 m
h(m)
10.0 0.5
8.0 1.0 6.0 2.0 4.0 6.0 2.0 52.0
28°
E(lx) 3000K
28°
325 x 325
0(m)
111
115
115

COMPACT ø 370 mm Semiacid – etched glass
S.5131W.19 h(m)
E(lx) 3000K


16 HIGH-POWER LEDs 3000K CRI90 2270lm
Rated luminaire luminous flux 1658lm 12.0 5.0
Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±10° optic
8.0 19.0 4.0 111.0
0.1 m 0(m)
20.0 1.0
16.0 2.0
S.5130W.19 h(m)
E(lx) 3000K
22°
370 220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±10° optic
0.1 m
4.0 13.0 0(m)
20.0 0.0
Rated luminaire luminous flux 1377lm 12.0 0.5
Rated input power 28W 8.0 1.5
22°
16 HIGH-POWER LEDs 3000K CRI90 2270lm
16.0 0.0
112
400 x 400
Beam lenses available on request with no surcharge: 38°
T 36°C
115

113
“Masseria Ciura”, Massafra, Italy © Arch. Giampaolo Bianco

114

Zip Comfort
Walk-over
Zip, our historic family of in-ground walk-over fittings, has constantly evolved to achive greater and more precise lighting control.
Today it comes with a renewed look thanks to the introduction of the comfort optic: a sophisticatd optical systems able to considerably reduce glare thanks to the retracted position of the LED.
Available with many performing optics, different shapes and trims, ZIP is the right answer to the most difficult architectural challenges.
www.simes.it/zip 115

ZIP ROUND COMFORT Walk-over
Die-cast EN AB-44100 aluminium housing with high corrosion resistance. Marine grade stainless steel AISI 316L front trim 2 mm thick or aluminium.
Toughened glass diffuser
8mm thick for Microzip,
8mm thick for Minizip,
10mm thick for Zip,
12mm thick for Megazip. Stainless steel screws.
Pre-wired luminaire with neoprene cable and connector.
Recessing box in polypropylene. Silicone gaskets.
Double powder paint.
Maximum weight 1000 Kg
Protection class
IP65 / IP67
Isolation class
CLASS I y
Mechanical resistance
IK 08 Microzip
IK 09 Minizip, Zip and Megazip
The recessing box must be placed at ground level.
20 cm drainage gravel must be used under the recessing box to allow easy water evacuation.
Connection to the main line has to be done into junction boxes.
S.5506
4 way connector for through wiring (in/out).
Only for Minizip, Zip and Megazip.
116
Finishing:
Black Stainless steel
(code .09) (code .19)
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it

MICROZIP ROUND COMFORT Stainless-steel front trim Acid – Etched Glass
85
S.8814W.19 h(m)
E(lx) 3000K
E(lx) 4000K
91°
HIGH-POWER LEDs 3000K CRI90 105lm Rated luminaire luminous flux 20lm
S.8814N.19
HIGH-POWER LEDs 4000K CRI90 115lm Rated luminaire luminous flux 21lm
2.5 0.0 2.0 0.0 1.5 0.5 1.0 1.0 0.5 7.5
0.1 m 0(m)
91° 0.0 0.0 0.5 1.0 7.5
0(m)
91°
Rated input power 2,2W
120 220V-240V AC 50/60Hz / DC Not Dimmable
Transparent glass
85
120
Led position fixed T 37°C
S.8811W.19
1 HIGH-POWER LED 3000K CRI90 105lm Rated luminaire luminous flux 86lm
S.8811N.19
1 HIGH-POWER LED 4000K CRI90 115lm Rated luminaire luminous flux 94lm
Rated input power 2,2W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
Beam lenses available on request with no surcharge: 26° and 38°
T 37°C
12°
h(m)
5.0 1.0 4.0 1.5 3.0 3.5 2.0 10.0 1.0 43.0
0.1 m 0(m)
E(lx) 4000K
E(lx) 3000K
12° 1.0
12°
2.0
4.0 11.0 47.0
0(m)
MICROZIP ROUND COMFORT Aluminium front trim Acid – Etched Glass
S.7814W h(m)
E(lx) 3000K
E(lx) 4000K
91°
HIGH-POWER LEDs 3000K CRI90 105lm Rated luminaire luminous flux 20lm
S.7814N
85 HIGH-POWER LEDs 4000K CRI90 115lm
2.5 0.0 2.0 0.0 1.5 0.5 1.0 1.0 0.5 7.5
0(m)
91° 0.0 0.0 0.5 1.0 7.5
0(m)
91°
120
Transparent glass
85
120
h(m)
5.0 1.0 4.0 1.5 3.0 3.5 2.0 10.0 1.0 43.0
E(lx) 4000K
Rated luminaire luminous flux 21lm
Rated input power 2,2W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 37°C
S.7811W
1 HIGH-POWER LED 3000K CRI90 105lm Rated luminaire luminous flux 86lm
S.7811N
1 HIGH-POWER LED 4000K CRI90 115lm Rated luminaire luminous flux 94lm
Rated input power 2,2W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
0.1 m
E(lx) 3000K
12° 1.0
12°
12°
Beam lenses available on request with no surcharge: 26° and 38°
T 37°C
117
0.1 m
0(m)
2.0
4.0 11.0 47.0
0(m)
125 125 125 125

MINIZIP ROUND COMFORT Stainless-steel front trim Acid – Etched Glass
S.8805W.19 h(m)
E(lx) 3000K
E(lx) 4000K
90°
HIGH-POWER LEDs 3000K CRI90 140lm Rated luminaire luminous flux 35lm
S.8805N.19
HIGH-POWER LEDs 4000K CRI90 150lm
Rated luminaire luminous flux 38lm
Rated input power 3W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 37°C
S.8831W.19
2 HIGH-POWER LEDs 3000K CRI90 400lm Rated luminaire luminous flux 288lm
S.8831N.19
2 HIGH-POWER LEDs 4000K CRI90 420lm Rated luminaire luminous flux 302lm
5.0 0.0 4.0 0.0 3.0 0.0 2.0 0.0 1.0 1.5
0(m)
90° 0.0 0.0 0.0 0.0 1.5
0(m)
90°
130
165
Transparent glass
0.1 m
h(m)
5.0 2.5 4.0 4.5 3.0 11.0 2.0 34.0 1.0 130.0
E(lx) 4000K
E(lx) 3000K
12° 3.0
12°
12°
5.0 12.0 35.0 136.0
S.8832W.19
130 2 HIGH-POWER LEDs 3000K CRI90 400lm
0.1 m
0.1 m
0(m) E(lx) 3000K
0(m) E(lx) 4000K
h(m)
5.0 0.5 4.0 1.0 3.0 2.0 2.0 9.0 1.0 56.0
0(m)
ASY 0.5 1.5 2.5 9.5 59.0
0(m)
ASY
=5°
C0 6°+6° C90 54°
165
Rated luminaire luminous flux 274lm
S.8832N.19
2 HIGH-POWER LEDs 4000K CRI90 420lm Rated luminaire luminous flux 287lm
Rated input power 5W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
Transparent glass
130
165
T 37°C
S.8833W.19
1 COB LED 3000K CRI90 350lm Rated luminaire luminous flux 284lm
S.8833N.19
1 COB LED 4000K CRI90 360lm Rated luminaire luminous flux 292lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
h(m)
5.0 0.0 4.0 0.5 3.0 1.5 2.0 5.0 1.0 37.0
0(m)
E(lx) 4000K
Beam lenses available on request with no surcharge: 65° and 10°x44°
E(lx) 3000K
33° 0.5
33°
33°
118
0.1 m
1.0 2.0 5.5
38.0 0(m)
135 135 135

MINIZIP ROUND COMFORT Aluminium front trim Acid – Etched Glass
S.7805W h(m)
E(lx) 3000K
E(lx) 4000K
90°
HIGH-POWER LEDs 3000K CRI90 140lm Rated luminaire luminous flux 35lm
S.7805N
HIGH-POWER LEDs 4000K CRI90 150lm
Rated luminaire luminous flux 38lm
Rated input power 3W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 37°C
S.7831W
2 HIGH-POWER LEDs 3000K CRI90 400lm Rated luminaire luminous flux 288lm
S.7831N
2 HIGH-POWER LEDs 4000K CRI90 420lm Rated luminaire luminous flux 302lm
5.0 0.0 4.0 0.0 3.0 0.0 2.0 0.0 1.0 1.5
0(m)
90° 0.0 0.0 0.0 0.0 1.5
0(m)
90°
135
165
Transparent glass
0.1 m
h(m)
5.0 2.5 4.0 4.5 3.0 11.0 2.0 34.0 1.0 130.0
0(m)
E(lx) 4000K
E(lx) 3000K
12° 3.0
12°
12°
135 S.7832W
2 HIGH-POWER LEDs 3000K CRI90 400lm
h(m)
5.0 0.5 4.0 1.0 3.0 2.0 2.0 9.0 1.0 56.0
0(m)
E(lx) 4000K
0.1 m
0.1 m
5.0 12.0 35.0 136.0
0(m)
E(lx) 3000K
ASY 0.5
ASY
=5°
C0 6°+6° C90 54°
165
Rated luminaire luminous flux 274lm
S.7832N
2 HIGH-POWER LEDs 4000K CRI90 420lm Rated luminaire luminous flux 287lm
Rated input power 5W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
1.5 2.5 9.5
59.0 0(m)
Transparent glass
135
165
T 37°C
S.7833W
1 COB LED 3000K CRI90 350lm Rated luminaire luminous flux 284lm
S.7833N
1 COB LED 4000K CRI90 360lm Rated luminaire luminous flux 292lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
h(m)
5.0 0.0 4.0 0.5 3.0 1.5 2.0 5.0 1.0 37.0
0(m)
E(lx) 4000K
Beam lenses available on request with no surcharge: 65° and 10°x44°
E(lx) 3000K
33° 0.5
33°
33°
0.1 m
1.0 2.0 5.5
38.0 0(m)
119
135
135 135

ZIP ROUND COMFORT Stainless-steel front trim Acid – etched glass
S.8864W.19
HIGH-POWER LEDs 3000K CRI90 560lm Rated luminaire luminous flux 60lm
S.8864N.19
HIGH-POWER LEDs 4000K CRI90 605lm
Rated luminaire luminous flux 66lm
Rated input power 8W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
200 Computer-simulated photometrics T 35°C
h(m) E(lx) 5 0.0
4 0.0 3 0.0 2 0.5 1 2.0
3000K
92° 0.0
0.0 0.0 1.0 2.5
0(m)
Transparent glass
S.8891W.19 h(m)
E(lx) 3000K
E(lx) 4000K
E(lx) 4000K
92°
92°
0.1 m
0(m)
12°
9 HIGH-POWER LED 3000K CRI90 1390lm Rated luminaire luminous flux 1001lm
S.8891N.19
9 HIGH-POWER LED 4000K CRI90 1430lm Rated luminaire luminous flux 1029lm
S.8892W.19
9 HIGH-POWER LED 3000K CRI90 1390lm Rated luminaire luminous flux 950lm
S.8892N.19
9 HIGH-POWER LED 4000K CRI90 1430lm Rated luminaire luminous flux 978lm
Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
10.0 2.0 8.0 3.5 6.0 8.0 4.0 25.0 2.0 114.0
0(m)
12° 2.0 4.0 8.5 27.0 118.0
12°
0.1 m
0.1 m
0(m)
h(m)
10.0 0.0
8.0 0.5 6.0 1.0 4.0 5.0 2.0 40.0
0(m)
E(lx) 4000K
E(lx) 3000K
=5°
C0 6°+6° C90 54°
ASY 0.5 1.0 1.5 5.5 42.0
ASY
Transparent glass
T 37°C
S.8893W.19
1 COB LED 3000K CRI90 1470lm Rated luminaire luminous flux 1029lm
S.8893N.19
1 COB LED 4000K CRI90 1520lm Rated luminaire luminous flux 1064m
Rated input power 14W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
Beam lenses available on request with no surcharge: 65° and 10°x44°
0(m)
h(m)
10.0 0.5
8.0 1.0 6.0 2.0 4.0 6.0 2.0 41.0
0(m)
E(lx) 4000K
E(lx) 3000K
33°
33° 0.5 1.0 2.5 6.5 43.0
0(m)
33°
120
0.1 m
240

ZIP ROUND COMFORT Aluminium front trim Acid – etched glass
210
Transparent glass
S.7864W
HIGH-POWER LEDs 3000K CRI90 560lm Rated luminaire luminous flux 60lm
S.7864N
HIGH-POWER LEDs 4000K CRI90 605lm Rated luminaire luminous flux 66lm
Rated input power 8W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
Computer-simulated photometrics
T 35°C
h(m)
5 0.0 4 0.0 3 0.0 2 0.5 1 2.0
E(lx) 4000K
92°
S.7891W h(m)
E(lx) 3000K
E(lx) 4000K
E(lx) 3000K
92° 0.0
92°
0.1 m
0(m)
0.0 0.0 1.0 2.5
0(m)
12°
9 HIGH-POWER LED 3000K CRI90 1390lm Rated luminaire luminous flux 1001lm
S.7891N
9 HIGH-POWER LED 4000K CRI90 1430lm Rated luminaire luminous flux 1029lm
S.7892W
9 HIGH-POWER LED 3000K CRI90 1390lm Rated luminaire luminous flux 950lm
S.7892N
9 HIGH-POWER LED 4000K CRI90 1430lm Rated luminaire luminous flux 978lm
Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
10.0 2.0 8.0 3.5 6.0 8.0 4.0 25.0 2.0 114.0
0(m)
12°
2.0 4.0 8.5
27.0 118.0
0(m)
12°
0.1 m
0.1 m
h(m)
10.0 0.0
8.0 0.5 6.0 1.0 4.0 5.0 2.0 40.0
0(m)
E(lx) 4000K
E(lx) 3000K
=5°
C0 6°+6° C90 54°
ASY 0.5 1.0 1.5 5.5 42.0
ASY
Transparent glass
T 37°C
S.7893W
1 COB LED 3000K CRI90 1470lm Rated luminaire luminous flux 1029lm
S.7893N
1 COB LED 4000K CRI90 1520lm Rated luminaire luminous flux 1064m
Rated input power 14W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
Beam lenses available on request with no surcharge: 65° and 10°x44°
0(m)
h(m)
10.0 0.5
8.0 1.0 6.0 2.0 4.0 6.0 2.0 41.0
0(m)
E(lx) 4000K
E(lx) 3000K
33°
33° 0.5 1.0 2.5 6.5 43.0
0(m)
33°
0.1 m
121
240

MEGAZIP ROUND COMFORT Stainless-steel front trim Acid – etched glass
S.8568W.19
HIGH-POWER LEDs 3000K CRI90 1070lm Rated luminaire luminous flux 269lm
S.8568N.19
HIGH-POWER LEDs 4000K CRI90 1050lm
Rated luminaire luminous flux 261lm
Rated input power 11W
220V-240V AC 50/60Hz Not Dimmable Led position fixed
T 40°C
S.8500W.19
16 HIGH-POWER LED 3000K CRI90 2245lm Rated luminaire luminous flux 1616lm
S.8500N.19
16 HIGH-POWER LED 4000K CRI90 2312lm
Rated luminaire luminous flux 1664lm
S.8501W.19
16 HIGH-POWER LED 3000K CRI90 2245lm Rated luminaire luminous flux 1535lm
S.8501N.19
16 HIGH-POWER LED 4000K CRI90 2312lm
Rated luminaire luminous flux 1580lm
Rated input power 27W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
h(m) E(lx) 5 0.0
4 0.0 3 0.5 2 2.0 1 13.0
3000K E(lx) 4000K
86°
86° 0.0 0.0 0.5 1.5 13.0
86°
Transparent glass
0.1 m
0(m) 0(m)
12°
h(m) 10.0 8.0 6.0 4.0 2.0
h(m) 10.0 8.0 6.0 4.0 2.0
3000K E(lx) 4000K
E(lx) 3.0 5.0
11.0
40.0 172.0
0(m)
12° 3.5 5.5 13.0 43.0 177.0
0(m)
3000K
ASY 0.5
12°
0.1 m
0.1 m
E(lx) 0.5
1.0 2.0 7.0
59.0 0(m)
E(lx) 4000K
=5°
C0 6°+6° C90 54°
1.5 2.5 7.5
61.0 0(m)
ASY
Transparent glass
T 37°C
S.8502W.19
1 COB LED 3000K CRI90 2950lm Rated luminaire luminous flux 2061lm
S.8502N.19
1 COB LED 4000K CRI90 3038lm Rated luminaire luminous flux 2126lm
Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
Beam lenses available on request with no surcharge: 65° and 10°x44°
h(m)
10.0 1.0
8.0 1.5 6.0 3.5 4.0 12.0 2.0 108.0
0(m)
E(lx) 4000K
E(lx) 3000K
33°
33° 1.5 2.0 4.0 13.0 112.0
0(m)
33°
275
0.1 m
122
245

MEGAZIP ROUND COMFORT Aluminium front trim Acid – etched glass
S.8578W
HIGH-POWER LEDs 3000K CRI90 1070lm Rated luminaire luminous flux 269lm
S.8578N
HIGH-POWER LEDs 4000K CRI90 1050lm
Rated luminaire luminous flux 261lm
Rated input power 11W
220V-240V AC 50/60Hz Not Dimmable Led position fixed
T 40°C
S.8570W
16 HIGH-POWER LED 3000K CRI90 2245lm Rated luminaire luminous flux 1616lm
S.8570N
16 HIGH-POWER LED 4000K CRI90 2312lm
Rated luminaire luminous flux 1664lm
S.8571W
16 HIGH-POWER LED 3000K CRI90 2245lm Rated luminaire luminous flux 1535lm
h(m)
5 0.0 4 0.0 3 0.5 2 2.0 1 13.0
0.1 m 0(m)
86°
E(lx) 3000K E(lx) 4000K
86° 0.0 0.0 0.5 1.5 13.0
86°
Transparent glass
0(m)
12°
h(m)
10.0 3.0
8.0 5.0 6.0 11.0 4.0 40.0 2.0 172.0
0.1 m 0(m)
E(lx) 4000K
E(lx) 3000K
12° 3.5 5.5 13.0 43.0 177.0
12°
0(m)
=5°
C0 6°+6° C90 54°
6.0 2.0 S.8571N 4.0 7.0
16 HIGH-POWER LED 4000K CRI90 2312lm Rated luminaire luminous flux 1580lm
Rated input power 27W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
0.1 m
2.0 59.0 0(m)
0(m)
h(m)
10.0 0.5
8.0 1.0
E(lx) 4000K
E(lx) 3000K
ASY 0.5 1.5 2.5 7.5 61.0
ASY
Transparent glass
T 37°C
S.8572W
1 COB LED 3000K CRI90 2950lm Rated luminaire luminous flux 2061lm
S.8572N
1 COB LED 4000K CRI90 3038lm Rated luminaire luminous flux 2126lm
Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
Beam lenses available on request with no surcharge: 65° and 10°x44°
h(m)
10.0 1.0
8.0 1.5 6.0 3.5 4.0 12.0 2.0 108.0
0(m)
E(lx) 4000K
E(lx) 3000K
33°
33° 1.5 2.0 4.0 13.0 112.0
0(m)
33°
280
0.1 m
123
245

124
Kilden Concert Hall, Kristianssand, Norway © ph. Halvor Gudim / Fagerhult AS

125

ZIP SQUARE COMFORT Walk-over
Die-cast EN AB-44100 aluminium housing with high corrosion resistance. Marine grade stainless steel AISI 316L front trim 2 mm thick or aluminium.
Toughened glass diffuser
8mm thick for Microzip,
8mm thick for Minizip,
10mm thick for Zip,
12mm thick for Megazip. Stainless steel screws.
Pre-wired luminaire with neoprene cable and connector.
Recessing box in polypropylene. Silicone gaskets.
Double powder paint.
Maximum weight 1000 Kg
Protection class
IP65 / IP67
Isolation class
CLASS I y
Mechanical resistance
IK 08 Microzip
IK 09 Minizip, Zip and Megazip
The recessing box must be placed at ground level.
20 cm drainage gravel must be used under the recessing box to allow easy water evacuation.
Connection to the main line has to be done into junction boxes.
S.5506
4 way connector for through wiring (in/out).
Only for Minizip, Zip and Megazip.
126
Finishing:
Black Stainless steel
(code .09) (code .19)
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it

MICROZIP SQUARE COMFORT Stainless-steel front trim Acid – Etched Glass
MICROZIP SQUARE COMFORT Aluminium front trim Acid – Etched Glass
S.8819W.19 h(m)
E(lx) 3000K
E(lx) 4000K
91°
HIGH-POWER LEDs 3000K CRI90 105lm Rated luminaire luminous flux 20lm
S.8819N.19
HIGH-POWER LEDs 4000K CRI90 115lm Rated luminaire luminous flux 21lm
Rated input power 2,2W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 37°C
S.8815W.19
1 HIGH-POWER LED 3000K CRI90 105lm
Rated luminaire luminous flux 86lm
S.8815N.19
1 HIGH-POWER LED 4000K CRI90 115lm
Rated luminaire luminous flux 94lm
Rated input power 2,2W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
2.5 0.0 2.0 0.0 1.5 0.5 1.0 1.0 0.5 7.5
0.1 m 0(m)
91° 0.0 0.0 0.5 1.0 7.5
0(m)
91°
85 x 85
120 x 120
Transparent glass
85 x 85
120 x 120
h(m)
5.0 1.0 4.0 1.5 3.0 3.5 2.0 10.0 1.0 43.0
0.1 m 0(m)
E(lx) 4000K
12°
E(lx) 3000K
12° 1.0
12°
2.0
4.0 11.0 47.0
0(m)
Beam lenses available on request with no surcharge: 26° and 38°
T 37°C
S.7819W
HIGH-POWER LEDs 3000K CRI90 105lm Rated luminaire luminous flux 20lm
S.7819N
HIGH-POWER LEDs 4000K CRI90 115lm Rated luminaire luminous flux 21lm
Rated input power 2,2W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 37°C
S.7815W
1 HIGH-POWER LED 3000K CRI90 105lm
Rated luminaire luminous flux 86lm
S.7815N
1 HIGH-POWER LED 4000K CRI90 115lm
Rated luminaire luminous flux 94lm
Rated input power 2,2W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
h(m)
2.5 0.0 2.0 0.0 1.5 0.5 1.0 1.0 0.5 7.5
0.1 m 0(m)
E(lx) 4000K
91°
E(lx) 3000K
91° 0.0
91°
85 x 85
120 x 120
Transparent glass
85 x 85
120 x 120
0.0 0.5 1.0 7.5
0(m)
12°
h(m)
5.0 1.0 4.0 1.5 3.0 3.5 2.0 10.0 1.0 43.0
0.1 m 0(m)
E(lx) 4000K
E(lx) 3000K
12° 1.0
12°
2.0
4.0 11.0 47.0
0(m)
Beam lenses available on request with no surcharge: 26° and 38°
T 37°C
127
125 125 125 125

MINIZIP SQUARE COMFORT Stainless-steel front trim Acid – Etched Glass
S.8825W.19 h(m)
E(lx) 3000K
E(lx) 4000K
90°
HIGH-POWER LEDs 3000K CRI90 140lm Rated luminaire luminous flux 35lm
S.8825N.19
HIGH-POWER LEDs 4000K CRI90 150lm Rated luminaire luminous flux 38lm
Rated input power 3W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 37°C
S.8835W.19
4 HIGH-POWER LEDs 3000K CRI90 480lm Rated luminaire luminous flux 345lm
S.8835N.19
4 HIGH-POWER LEDs 4000K CRI90 520lm Rated luminaire luminous flux 374lm
S.8836W.19
4 HIGH-POWER LEDs 3000K CRI90 480lm Rated luminaire luminous flux 327lm
S.8836N.19
4 HIGH-POWER LEDs 4000K CRI90 520lm Rated luminaire luminous flux 355lm
Rated input power 7W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
5.0 0.0 4.0 0.0 3.0 0.0 2.0 0.0 1.0 1.5
0(m)
90° 0.0 0.0 0.0 0.0 1.5
0(m)
90°
Transparent glass
130 x 130
165 x 165
h(m)
5.0 3.0 4.0 5.0 3.0 12.0 2.0 34.0 1.0 91.0
0(m)
E(lx) 4000K
0.1 m
E(lx) 3000K
12° 3.5
12°
12°
0.1 m
0.1 m
6.0 14.0 40.0 105.0
0(m)
h(m)
5.0 0.5 4.0 2.0 3.0 2.5 2.0 6.5 1.0 60.0
0(m)
E(lx) 4000K
E(lx) 3000K
ASY 1.0
ASY
=5°
C0 6°+6° C90 54°
2.5 3.0 9.0
99.0 0(m)
Transparent glass
130 x 130
165 x 165
T 37°C
S.8837W.19
1 COB LED 3000K CRI90 350lm Rated luminaire luminous flux 284lm
S.8837N.19
1 COB LED 4000K CRI90 360lm Rated luminaire luminous flux 292lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
h(m)
5.0 0.0 4.0 0.5 3.0 1.5 2.0 5.0 1.0 37.0
0(m)
E(lx) 4000K
Beam lenses available on request with no surcharge: 65° and 10°x44°
E(lx) 3000K
33° 0.5
33°
33°
128
0.1 m
1.0 2.0 5.5
38.0 0(m)
135 135

MINIZIP SQUARE COMFORT Aluminium front trim Acid – Etched Glass
S.7825W h(m)
E(lx) 3000K
E(lx) 4000K
90°
HIGH-POWER LEDs 3000K CRI90 140lm Rated luminaire luminous flux 35lm
S.7825N
HIGH-POWER LEDs 4000K CRI90 150lm
Rated luminaire luminous flux 38lm
Rated input power 3W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 37°C
S.7835W
4 HIGH-POWER LEDs 3000K CRI90 480lm Rated luminaire luminous flux 345lm
S.7835N
4 HIGH-POWER LEDs 4000K CRI90 520lm Rated luminaire luminous flux 374lm
S.7836W
4 HIGH-POWER LEDs 3000K CRI90 480lm Rated luminaire luminous flux 327lm
S.7836N
4 HIGH-POWER LEDs 4000K CRI90 520lm Rated luminaire luminous flux 355lm
Rated input power 7W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
5.0 0.0 4.0 0.0 3.0 0.0 2.0 0.0 1.0 1.5
0(m)
90° 0.0 0.0 0.0 0.0 1.5
0(m)
90°
135 x 135
165 x 165
Transparent glass
135 x 135
165 x 165
h(m)
5.0 3.0 4.0 5.0 3.0 12.0 2.0 34.0 1.0 91.0
0(m)
E(lx) 4000K
0.1 m
E(lx) 3000K
12° 3.5
12°
12°
0.1 m
0.1 m
6.0 14.0 40.0 105.0
0(m)
h(m)
5.0 0.5 4.0 2.0 3.0 2.5 2.0 6.5 1.0 60.0
0(m)
E(lx) 4000K
E(lx) 3000K
ASY 1.0
ASY
=5°
C0 6°+6° C90 54°
2.5 3.0 9.0
99.0 0(m)
Transparent glass
135 x 135
165 x 165
T 37°C
S.7837W
1 COB LED 3000K CRI90 350lm Rated luminaire luminous flux 284lm
S.7837N
1 COB LED 4000K CRI90 360lm Rated luminaire luminous flux 292lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
h(m)
5.0 0.0 4.0 0.5 3.0 1.5 2.0 5.0 1.0 37.0
0(m)
E(lx) 4000K
Beam lenses available on request with no surcharge: 65° and 10°x44°
E(lx) 3000K
33° 0.5
33°
33°
0.1 m
1.0 2.0 5.5
38.0 0(m)
129
135
135 135

ZIP SQUARE COMFORT Stainless-steel front trim Acid – etched glass
S.8884W.19
HIGH-POWER LEDs 3000K CRI90 560lm Rated luminaire luminous flux 60lm
S.8884N.19
HIGH-POWER LEDs 4000K CRI90 605lm
Rated luminaire luminous flux 66lm
Rated input power 8W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
Computer-simulated photometrics
T 35°C
h(m)
5 0.0 4 0.0 3 0.0 2 0.5 1 2.0
E(lx) 3000K E(lx) 4000K
92°
92° 0.0 0.0 0.0 1.0 2.5
0(m)
92°
200 x 200
Transparent glass
0.1 m
0(m)
S.8895W.19 h(m)
E(lx) 3000K E(lx) 4000K
12°
9 HIGH-POWER LED 3000K CRI90 1390lm Rated luminaire luminous flux 1001lm
S.8895N.19
9 HIGH-POWER LED 4000K CRI90 1430lm Rated luminaire luminous flux 1029lm
S.8896W.19
9 HIGH-POWER LED 3000K CRI90 1390lm Rated luminaire luminous flux 950lm
S.8896N.19
9 HIGH-POWER LED 4000K CRI90 1430lm Rated luminaire luminous flux 978lm
Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
10.0 2.0 8.0 3.5 6.0 8.0 4.0 25.0 2.0 114.0
12° 2.0 4.0 8.5 27.0 118.0
12°
0.1 m
0.1 m
0(m)
E(lx) 3000K E(lx) 4000K
h(m)
10.0 0.0
8.0 0.5 6.0 1.0 4.0 5.0 2.0 40.0
0(m)
ASY 0.5 1.0 1.5 5.5 42.0
0(m)
ASY
0(m)
=5°
C0 6°+6° C90 54°
Transparent glass
Beam lenses available on request with no surcharge: 65° and 10°x44°
T 37°C
S.8897W.19 h(m)
1 COB LED 3000K CRI90 1470lm Rated luminaire luminous flux 1029lm
S.8897N.19
1 COB LED 4000K CRI90 1520lm Rated luminaire luminous flux 1064m
Rated input power 14W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
10.0 0.5 8.0 1.0 6.0 2.0 4.0 6.0 2.0 41.0
0(m)
33° 0.5 1.0 2.5 6.5 43.0
0(m)
33°
E(lx) 3000K E(lx) 4000K
33°
130
0.1 m
240

ZIP SQUARE COMFORT Aluminium front trim Acid – etched glass
S.7884W
HIGH-POWER LEDs 3000K CRI90 560lm Rated luminaire luminous flux 60lm
S.7884N
HIGH-POWER LEDs 4000K CRI90 605lm Rated luminaire luminous flux 66lm
Rated input power 8W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
Computer-simulated photometrics
T 35°C
h(m)
5 0.0 4 0.0 3 0.0 2 0.5 1 2.0
E(lx) 4000K
92°
E(lx) 3000K
92° 0.0
92°
210 x 210
Transparent glass
0.1 m
0(m)
0.0 0.0 1.0 2.5
0(m)
S.7895W h(m)
E(lx) 3000K
E(lx) 4000K
12°
9 HIGH-POWER LED 3000K CRI90 1390lm Rated luminaire luminous flux 1001lm
S.7895N
9 HIGH-POWER LED 4000K CRI90 1430lm Rated luminaire luminous flux 1029lm
S.7896W
9 HIGH-POWER LED 3000K CRI90 1390lm Rated luminaire luminous flux 950lm
S.7896N
9 HIGH-POWER LED 4000K CRI90 1430lm Rated luminaire luminous flux 978lm
Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
10.0 2.0 8.0 3.5 6.0 8.0 4.0 25.0 2.0 114.0
12°
2.0 4.0 8.5
27.0 118.0
12°
1 COB LED 3000K CRI90 1470lm Rated luminaire luminous flux 1029lm
S.7897N
1 COB LED 4000K CRI90 1520lm Rated luminaire luminous flux 1064m
Rated input power 14W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
10.0 0.5 8.0 1.0 6.0 2.0 4.0 6.0 2.0 41.0
0(m)
33° 0.5 1.0 2.5 6.5 43.0
0(m)
33°
0.1 m
0.1 m
0(m) E(lx) 3000K
0(m) E(lx) 4000K
h(m)
10.0 0.0
8.0 0.5 6.0 1.0 4.0 5.0 2.0 40.0
0(m)
ASY 0.5 1.0 1.5 5.5 42.0
ASY
=5°
C0 6°+6° C90 54°
Transparent glass
Beam lenses available on request with no surcharge: 65° and 10°x44°
T 37°C
S.7897W h(m)
E(lx) 3000K
E(lx) 4000K
0(m)
33°
0.1 m
131
240

MEGAZIP SQUARE COMFORT Stainless-steel front trim Acid – etched glass
S.8588W.19
HIGH-POWER LEDs 3000K CRI90 1070lm Rated luminaire luminous flux 269lm
S.8588N.19
HIGH-POWER LEDs 4000K CRI90 1050lm
Rated luminaire luminous flux 261lm
Rated input power 11W
220V-240V AC 50/60Hz Not Dimmable Led position fixed
T 40°C
S.8580W.19
16 HIGH-POWER LED 3000K CRI90 2245lm Rated luminaire luminous flux 1616lm
S.8580N.19
16 HIGH-POWER LED 4000K CRI90 2312lm Rated luminaire luminous flux 1664lm
S.8581W.19
16 HIGH-POWER LED 3000K CRI90 2245lm Rated luminaire luminous flux 1535lm
S.8581N.19
16 HIGH-POWER LED 4000K CRI90 2312lm Rated luminaire luminous flux 1580lm
Rated input power 27W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
h(m) E(lx) 5 0.0
4 0.0 3 0.5 2 2.0 1 13.0
3000K E(lx) 4000K
86°
86° 0.0 0.0 0.5 1.5 13.0
86°
0.1 m
0(m) 0(m)
Transparent glass
12°
h(m) 10.0 8.0 6.0 4.0 2.0
h(m) 10.0 8.0 6.0 4.0 2.0
3000K E(lx) 4000K
E(lx) 3.0 5.0
11.0
40.0 172.0
0(m)
12° 3.5 5.5 13.0 43.0 177.0
12°
0.1 m
0.1 m
E(lx) 0.5
1.0 2.0 7.0
59.0 0(m)
0(m) E(lx) 4000K
=5°
C0 6°+6° C90 54°
3000K
ASY 0.5
ASY
1.5 2.5 7.5
61.0 0(m)
Beam lenses available on request with no surcharge: 65° and 10°x44°
Transparent glass
T 37°C
S.8582W.19
1 COB LED 3000K CRI90 2950lm Rated luminaire luminous flux 2061lm
h(m)
10.0 1.0
8.0 1.5 6.0 3.5 4.0 12.0
E(lx) 4000K
E(lx) 3000K
33°
S.8582N.19 2.0 108.0
33° 1.5 2.0 4.0 13.0 112.0
0(m)
33°
1 COB LED 4000K CRI90 3038lm Rated luminaire luminous flux 2126lm
Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
0.1 m 0(m)
275 x 275
132
245

MEGAZIP SQUARE COMFORT Aluminium front trim Acid – etched glass
S.8598W
HIGH-POWER LEDs 3000K CRI90 1070lm Rated luminaire luminous flux 269lm
S.8598N
HIGH-POWER LEDs 4000K CRI90 1050lm
Rated luminaire luminous flux 261lm
Rated input power 11W
220V-240V AC 50/60Hz Not Dimmable Led position fixed
T 40°C
S.8590W
16 HIGH-POWER LED 3000K CRI90 2245lm Rated luminaire luminous flux 1616lm
S.8590N
16 HIGH-POWER LED 4000K CRI90 2312lm Rated luminaire luminous flux 1664lm
S.8591W
16 HIGH-POWER LED 3000K CRI90 2245lm Rated luminaire luminous flux 1535lm
h(m)
5 0.0 4 0.0 3 0.5 2 2.0 1 13.0
0.1 m 0(m)
86°
E(lx) 3000K E(lx) 4000K
86° 0.0 0.0 0.5 1.5 13.0
86°
0(m)
Transparent glass
12°
h(m)
10.0 3.0
8.0 5.0 6.0 11.0 4.0 40.0 2.0 172.0
0.1 m 0(m)
E(lx) 4000K
E(lx) 3000K
12° 3.5 5.5 13.0 43.0 177.0
12°
=5°
C0 6°+6° C90 54°
280 x 280
6.0 2.0 S.8591N 4.0 7.0
16 HIGH-POWER LED 4000K CRI90 2312lm Rated luminaire luminous flux 1580lm
Rated input power 27W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
0.1 m
2.0 59.0 0(m)
0(m)
1 COB LED 4000K CRI90 3038lm Rated luminaire luminous flux 2126lm
Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
0.1 m 0(m)
h(m)
10.0 0.5
8.0 1.0
0(m) E(lx) 4000K
E(lx) 3000K
E(lx) 3000K
ASY 0.5 1.5 2.5 7.5 61.0
ASY
Transparent glass
T 37°C
S.8592W
Beam lenses available on request with no surcharge: 65° and 10°x44°
h(m)
10.0 1.0
E(lx) 4000K
33°
1 COB LED 3000K CRI90 2950lm 8.0 1.5
33° 1.5 2.0 4.0 13.0 112.0
0(m)
33°
Rated luminaire luminous flux 2061lm 6.0 3.5 4.0 12.0 S.8592N 2.0 108.0
133
245

134

Over-all
Surface mounted up-light
Over-all is an innovative on-ground up-lighter suitable for a multitude of applications: a special nylon fixing plate isolating it from the ground, is directly fixed to the surface without the need for any recessing box or soakaway, making it easier to install and maintain. The research on the shape and on the balance of the proportions have favoured the development of extremely neat and essential lines: it gives birth to a thin lighting body with no visible screws and reduced thickness.
Among the different applications, Over-all will illuminate trees, bushes and shrubbery; it also can be installed next to vertical surfaces to illuminate them with grazing light.
2018
www.simes.it/overall 135

270
190
136
OVER-ALL Surface mounted up-light
Punto Vespa, Corte Franca (Bs) Italy © SIMES S.p.A.
Over-all is supplied with a nylon insulating fixing base and 2 special keys (necessary to remove the luminaire).
Allowing direct fixation to the solid ground.
Accessory for soft surface application
S.1014
STAKE for MICRO OVER-ALL
in polypropylene. Colour: black (code 09) Length 190 mm
S.3524
STAKE
for MINI OVER-ALL and OVER-ALL in polypropylene.
Colour: black (code 09)
Length 270 mm
Die-cast EN AB-44100 aluminium housing with high corrosion resistance.
Toughened glass
5mm thick Micro Over-all,
6mm thick Mini Over-all,
8mm thick Over-all.
Clear polycarbonate lenses.
A4 stainless steel fixing clips. Insulating nylon fixing plate for direct ground surface mount.
Luminaire supplied with 6m of cable.
Double powder paint.
Colour:
Aluminium grey (code 14)
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
Protection class
IP65 / IP67
Isolation class
CLASS III 
Mechanical resistance
IK 08 MICRO OVER-ALL IK 07 MINI OVER-ALL IK 09 OVER-ALL
Power supply not included.
Leds 4000K CRI90 versions are available on request.
REGISTERED DESIGN

OVER-ALL
Micro Over-all
S.1925W
1 HIGH-POWER LED 3000K CRI90 195lm
with asymetrical lens
Rated luminaire luminous flux 164lm
Rated input power 2,2W 700mA Vf 3,2V max
S.1920W
1 HIGH-POWER LED 3000K CRI90 195lm
Rated luminaire luminous flux 175lm
Rated input power 2,2W 700mA V 3,2V max f
S.1921W
1 HIGH-POWER LED 3000K CRI90 195lm
Rated luminaire luminous flux 175lm
Rated input power 2,2W 700mA V 3,2V max f
Requires constant current Vout 120V DC max remote power supply (page 470)
Beam lenses available on request with no surcharge: 65° and 10°x44°
S.1905W
4 HIGH-POWER LEDs 3000K CRI90 780lm
with asymetrical lens
Rated luminaire luminous flux 653lm
Rated input power 9W 700mA Vf 12,8V max
S.1900W
4 HIGH-POWER LEDs 3000K CRI90 780lm Rated luminaire luminous flux 685lm
Rated input power 9W 700mA Vf 12,8V max
S.1901W
4 HIGH-POWER LEDs 3000K CRI90 780lm Rated luminaire luminous flux 676lm
Rated input power 9W 700mA Vf 12,8V max
Requires constant current Vout 120V DC max remote power supply (page 470)
Beam lenses available on request with no surcharge: 65° and 10°x44°
S.1915W
9 HIGH-POWER LEDs 3000K CRI90 1755lm with asymetrical lens
Rated luminaire luminous flux 1499lm
Rated input power 20,2W 700mA Vf 28,8V max
S.1910W
9 HIGH-POWER LEDs 3000K CRI90 1755lm Rated luminaire luminous flux 1569lm
Rated input power 20,2W 700mA Vf 28,8V max
S.1911W
9 HIGH-POWER LEDs 3000K CRI90 1755lm
Rated luminaire luminous flux 1488lm
Rated input power 20,2W 700mA V 28,8V max f
Requires constant current Vout 120V DC max remote power supply (page 470)
Beam lenses available on request with no surcharge: 65° and 10°x44°
E(lx) 3000K
h(m)
5 2210
C0 6°+6° C90 54°
4
3
2
1 7100
331 0 551 0 950 0
0.5 m
0.1m 0(m)
h(m)
5.0 1.0 4.0 3.0 3.0 7.0 2.0 24.0 1.0 110.0
0 1
23 (m)
E(lx) 3000K 12°
12°
32°
h(m)
5.0 0.0 4.0 0.5 3.0 1.5 2.0 5.0 1.0 38.0
E(lx) 3000K 32°
Mini Over-all
0.1m 0(m)
h(m)
10.0 1110
E(lx) 3000K
C0 6°+6° C90 54°
8.0 6.0 4.0 2.0
h(m)
10.0 1.0
8.0 2.0 6.0 4.0 4.0 14.0 2.0 99.0
0.1 m 0(m)
2 2 1 1
5 5 3 2 13 13 5 2 30 17 1 0
0.5 m
0 1 2
3 (m)
E(lx) 3000K
11°
11°
33°
h(m)
10.0 0.0
8.0 0.0 6.0 0.5 4.0 2.5 2.0 19.0
0.1 m 0(m)
E(lx) 3000K
33°
Over-all
h(m) 10.0
E(lx) 3000K
22 2 1
C0 6°+6° C90 54°
8.0 4433 6.0 9985
4.0 2.0
30 30 13 3
0.5 m
80 41 0 1
2 0
2 3 (m)
11°
h(m)
10.0 3.0
8.0 6.0 6.0 14.0 4.0 46.0 2.0 275.0
E(lx) 3000K
11°
0.1 m
0.1 m
0(m) E(lx) 3000K
34°
h(m)
10.0 0.5
8.0 1.0 6.0 2.0 4.0 7.5 2.0 60.0
34°
0(m)
137
=5°
=5°
=5°
Ø 260 31
Ø 200 29
Ø 120 27

138
Private residence, Malta © Light Design solutions LTD

Continuous line
Walk-over
CONTINUOUS LINE is a walk-over fitting designed to create paths of light with perfect uniformity and unlimited length. Extremely easy to install, this luminaire can transform any space with class and refinement.
www.simes.it/continuousline 139

CONTINUOUS LINE
To-be-fixed supports and recessing box in extruded anodized EN AW-6060 aluminium housing with high corrosion resistance.
Toughened glass diffusor 15 mm thick. Pre-wired luminaire with neoprene cable and connector.
Fixing bases and recessing box
included.
Maximun weight 500 Kg
Colour:
Anodized aluminium (code 13)
Walk-over
Protection class
IP65 / IP67
Isolation class
CLASS III  Mechanical resistance
IK 10
Power supply not included
Leds 4000K CRI80 versions are available on request.
PATENTED
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
Giardino della Pace, Sotto il Monte, Bergamo, Italy © SIMES S.p.A.
140

CONTINUOUS LINE
Fullglass 500 mm
500
S.7016W
MID-POWER LEDs 3000K CRI80 360lm
Rated luminaire luminous flux 165lm
Rated input power 3,5W 24V DC
Requires constant voltage remote power supply (page 468-469)
T 39°C
h(m) E(lx)
C0 88° C90 66°
35 90
2.5 2.0 1.5 1.0 0.5
0.1 m
0.5 0.5 0.5 0.0 1.0 1.0 1.0 0.5 2.0 2.0 1.5 1.0 8.0 6.0 3.5 2.0 45 25 7.0 2.5
Fullglass 1000 mm
0 0.3 0.6
0.9 (m)
1000
35 90
S.7011W
MID-POWER LEDs 3000K CRI80 740lm
Rated luminaire luminous flux 330lm
Rated input power 7W 24V DC
Requires constant voltage remote power supply (page 468-469)
T 39°C
h(m) E(lx)
C0 88° C90 66°
2.5 2.0 1.5 1.0 0.5
0.1 m
1.0 1.0 1.0 1.0 2.0 1.5 1.5 1.0 4.0 3.5 3.0 2.0 12 10 7.5 5.0 58 50 24 9.5
0 0.3 0.6 0.9 (m)
Fullglass 1500 mm
1500
35
90
S.7012W
MID-POWER LEDs 3000K CRI80 1100lm
Rated luminaire luminous flux 495lm
Rated input power 10,5W 24V DC
Requires constant voltage remote power supply (page 468-469)
h(m) E(lx)
C0 88° C90 66°
2.5 2.0 1.5 1.0 0.5
1.5 1.5 1.0 1.0 2.5 2.5 2.0 2.0 6.0 6.0 5.0 4.0 15 15 10 8.0 80 70 50 20
0 0.3 0.6 0.9 (m)
T 39°C
0.1 m
141
90
90
90

142

Minilinear
Flush Walk-over
Minilinear is a recessed luminaire perfectly flush with the floor that disappears completely integrating with the architecture. The soft or accent lighting effect mark pathways and facades discreetly.
Miniround
Flush Walk-over
Miniround embraces the elegant flush lines of Minilinear in a curved structure capable of designing striking lighting frames. Miniround emphasizes trunks and green foliage, colonnades, sculptures and non- linear paths.
www.simes.it/minilinear-miniround
143

MINILINEAR / MINIROUND Flush Walk-over
Die-cast EN AB-44100 and extruded EN AW-6060 aluminium housing with high corrosion resistance.
Toughened glass diffuser 6 mm thick. Stainless steel screws.
Pre-wired luminaire with neoprene cable and connector.
Silicone gaskets (Minilinear).
Recessing box in aluminium (Minilinear), in polyprolylene (Miniround).
Double powder paint.
Maximun weight 500 Kg
Protection class
IP65 / IP67
Isolation class
CLASS I y
Mechanical resistance
IK 09 MINILINEAR IK 08 MINIROUND
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to
www.simes.it
72°
Øi 667 housing Øi 707 luminaire
Øe 837 luminaire Øe 867 housing
Connection joint
The housing of Miniround has a “dove-tail” joint to perfectly connect two or more consecutive fittings (5 consecutive luminaires create a full circle).
144
S.5506
4 way connector for through wiring (in/out).
72°

MINILINEAR Full glass Semiacid-etched glass
S.5485W h(m) E(lx)
28°
8 HIGH-POWER LEDs 3000K CRI90 1374lm Rated luminaire luminous flux 826lm
Rated input power 13,8W
220V-240V AC 50/60Hz / DC Not Dimmable
54431 47742
3 2 1
18 13
55 27 258 30 0 0.5
5 1
4 0
1 0
1 1.5 (m)
Beam lenses available on request with no surcharge: 0.15 m 7°, 39°
T 40°C
Acid-etched glass
487
MINIROUND
S.5488W h(m) E(lx)
C0 86° C90 57°
MID-POWER LEDs 3000K CRI90 958lm Rated luminaire luminous flux 392lm
Rated input power 10,7W
220V-240V AC 50/60Hz / DC Not Dimmable
T 40°C
2.5 5221 2.0 5422
1.5 11 8 1.0 34 20 0.5 170 46
0.15 m 0 0.5
4 2
6 2
5 1
1 1.5 (m)
95
Full glass
Semiacid-etched glass
S.5400W
8 HIGH-POWER LEDs 3000K CRI90 1374lm 47742
h(m) E(lx) 54431
28°
Rated luminaire luminous flux 826lm
Rated input power 13,8W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 7°, 39°
T 40°C
S.5402W
MID-POWER LEDs 3000K CRI90 958lm
Rated luminaire luminous flux 392lm
Rated input power 10,7W
220V-240V AC 50/60Hz / DC Not Dimmable
3 18 13 2 55 27 1 258 30
0.15 m 0 0.5
5 1
4 0
1 0
1 1.5 (m)
Acid-etched glass
526
h(m) E(lx)
2.5 5221 2.0 5422
C0 86° C90 57°
1.5 11 8 1.0 34 20 0.5 170 46
0.15 m 0 0.5
4 2
6 2
5 1
1 1.5 (m)
64 72° 95
T 40°C
Øe 837 Øe 867
Øi 707
Øi 667
443
145
64
100
64
64

146
“Officina Vidre Negre” , Cuneo, Italy – Damilano studio Architects © Andrea Martiradonna

Stainless steel
Linear Walk-Over
LINEAR is a range of walk-over luminaires developed for elegant grazing light effects. LINEAR is perfect to underline paths and building façades. The minimalist design and shallow recessing depth allow for discrete installation in narrow niches.
www.simes.it/linear-walkover 147

LINEAR WALK-OVER
Chapel, Pazin, Croatia © LUKS d.o.o.
148
Die-cast EN AB-44100 and extruded EN AW-6060 aluminium housing with high corrosion resistance.
Marine grade stainless steel AISI 316L front trim 3 mm thick.
Toughened glass diffuser
10 mm thick for Minilinear,
10 mm thick for Linear.
99.98% pure aluminium reflectors. Stainless steel screws.
Pre-wired luminaire with neoprene cable and connector.
Silicone gaskets.
Recessing box in stainless steel (Linear), in aluminium (Minilinear).
Double powder paint.
Maximun weight 500 Kg
Protection class
IP65 / IP67
Isolation class
CLASS I y
CLASS III  RGB
Mechanical resistance
IK 09
Leds 4000K CRI90 versions are available on request.
RGBW versions requires constant voltage remote PWM power supply (page 471).
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
S.5506
Finishing:
Stainless steel
(code .19)
4 way connector for through wiring (in/out).

LINEAR WALK-OVER
Minilinear semiacid-etched glass
493 98 64
S.5495W.19
8 HIGH-POWER LEDs 3000K CRI90 1374lm Rated luminaire luminous flux 826lm
Rated input power 13,8W
220V-240V AC 50/60Hz / DC Not Dimmable
Beam lenses available on request with no surcharge: 7°, 39°
T 40°C
h(m) E(lx) 54431 47742
28°
3 2 1
0.15 m
18
55 258 0
13 5 1 27 4 0 30 1 0
0.5 1 1.5 (m)
S.5498W.19
MID-POWER LEDs 3000K CRI90 958lm Rated luminaire luminous flux 392lm
Rated input power 10,7W
220V-240V AC 50/60Hz / DC Not Dimmable
T 40°C
Minilinear acid-etched glass
493
64
Linear semiacid-etched glass
926
Linear acid-etched glass
926
98
C0 86° C90 57°
h(m) E(lx)
2.5 5221 2.0 5422
1.5 1.0 0.5
0.15 m
11 8
34 20 170 46 0 0.5
42 62
5 1
1 1.5 (m)
S.5942W.19
18 HIGH-POWER LEDs 3000K CRI90 2550lm Rated luminaire luminous flux 2028lm
Rated input power 30,5W
220V-240V AC 50/60Hz / DC Not Dimmable Asymmetric reflector
T 50°C
=5°
C0 10°+40° C90 80°
h(m) E(lx) 54322 47642
3 15 2 40 1 280
12 6 3 24 8 3 60 5 1
0.20 m
0
1 2
3 (m)
S.5931.19
MID-POWER LEDsRGB
Rated input power 30W 24V PWM Requires constant voltage remote PWM power supply (page 471)
T 50°C
S.5935W.19
MID-POWER LEDs 3000K CRI90 4100lm Rated luminaire luminous flux 675lm
Rated input power 21,2W
220V-240V AC 50/60Hz / DC Not Dimmable
T 50°C
C0 90° C90 66°
C0 90° C90 66°
h(m) 2.5 2.0 1.5 1.0 0.5
0.20 m
E(lx) 5533
10964 221894 664113 5
300 82 12 3
0 0.5 1 1.5 (m)
149
100
100
140
140
70 70

Inground recessed Drive-over
Ring / Flat 152 Microsparks 166
150

Surface mounted Drive-over
Suit 168
151

152

Ring Flat
Drive-over with comfort optics
RING-FLAT is an innovative combination of low recessing depth, high mechanical resistance and excellent lighting performance. RING-FLAT is available in 4 different sizes and, through the use of state-of-the-art cowls, the optical system is glare free, highlighting the importance of visual comfort required when using LED sources.
www.simes.it/ring-flat 153

RING / FLAT Drive-over with comfort optics
Sculpture, St. Tirso, Portugal – aut. Mauro Staccioli © Inovodecor
The recessing box must be placed at ground level. 30 cm drainage gravel
or drainage pipe must be used under the recessing box to allow easy water evacuation. Connection to the main line has to be done into junction boxes.
S.5506
4 way connector for through wiring (in/out).
Die-cast EN AB-44100 aluminium housing with high corrosion resistance. Marine grade stainless steel AISI 316L 3 mm thick for Ring.
Toughened glass diffuser
12mm thick for Microring,
15mm thick for Miniring,
19mm thick for Ring/Megaring; 10mm thick for Microflat,
12mm thick for Miniflat,
15mm thick for Flat/Megaflat. Stainless steel screws.
Pre-wired luminaire with neoprene cable and connector.
Recessing box in polypropylene. Silicone gaskets.
Double powder paint.
Protection class
IP65 / IP67
Isolation class
CLASS I y Mechanical resistance
IK 10
Leds 4000K CRI90 versions are available on request.
154
Finishing:
Stainless steel Black
(code .19) (code .09)
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it

MICRORING Stainless-steel (Maximum weight 5000 Kg – 30Km/h)
Acid-etched glass
Transparent glass
Ø 113
Ø 187
MICROFLAT Aluminium (Maximum weight 3500 Kg – 30Km/h)
Acid-etched glass
Transparent glass
Ø 103
h(m)
2.5 0.0 2.0 0.0 1.5 0.5 1.0 1.0 0.5 7.5
S.4946W.19
1 HIGH-POWER LED 3000K CRI90 105lm Rated luminaire luminous flux 20lm
Rated input power 2,2W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 30°C
S.7900W.19 h(m)
E(lx) 3000K 91°
91°
0.1 m 0(m)
E(lx) 3000K
12°
1 HIGH-POWER LED 3000K CRI90 105lm Rated luminaire luminous flux 86lm
Rated input power 2,2W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
5.0 1.0 4.0 1.5 3.0 3.5 2.0 10.0 1.0 43.0
12°
0.1 m
0(m)
Beam lenses available on request with no surcharge: 26° and 38°
T 30°C
S.4746W
1 HIGH-POWER LED 3000K CRI90 105lm Rated luminaire luminous flux 20lm
Rated input power 2,2W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 30°C
S.7950W
1 HIGH-POWER LED 3000K CRI90 105lm Rated luminaire luminous flux 86lm
Rated input power 2,2W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
E(lx) 3000K 91°
h(m)
2.5 0.0 2.0 0.0 1.5 0.5 1.0 1.0 0.5 7.5
0(m)
91°
0.1 m
12°
h(m)
5.0 1.0 4.0 1.5 3.0 3.5 2.0 10.0 1.0 43.0
E(lx) 3000K 12°
0.1 m
0(m)
Ø 187
Beam lenses available on request with no surcharge: 26° and 38°
T 30°C
155
175
175

MINIRING Stainless-steel (Maximum weight 5000 Kg – 30Km/h)
Acid-etched glass
S.4957W.19
HIGH-POWER LED 3000K CRI90 315lm Rated luminaire luminous flux 28lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 31°C
S.7910W.19
4 HIGH-POWER LEDs 3000K CRI90 480lm
Rated luminaire luminous flux 345lm
Rated input power 7W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
S.7911W.19
4 HIGH-POWER LEDs 3000K CRI90 480lm Rated luminaire luminous flux 327lm
Rated input power 7W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
h(m) 5.0 4.0 3.0 2.0 1.0
E(lx) 3000K 0.0
0.0
0.0
0.5 1.5
0(m)
E(lx) 3000K
70°
Transparent glass
0.1 m
12°
h(m) 5.0 4.0 3.0 2.0 1.0
h(m) 5.0 4.0 3.0 2.0 1.0
3.0
5.0 12.0 34.0 91.0
0(m)
E(lx) 3000K
12°
0.1 m
0.1 m
0.5 2.0 2.5 6.5
60.0 0(m)
ASY
=5°
C0 6°+6° C90 54°
Transparent glass
Ø 165
Ø 237
Beam lenses available on request with no surcharge: 65° and 10°x44°
T 37°C
S.7912W.19
1 COB LED 3000K CRI90 350lm
Rated luminaire luminous flux 284lm 3.0 1.5 Rated input power 4,3W 2.0 5.0
33°
h(m)
5.0 0.0 4.0 0.5
E(lx) 3000K 33°
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
0.1 m
1.0 37.0 0(m)
156
175

MINIFLAT Aluminium (Maximum weight 3500 Kg – 30Km/h)
Acid-etched glass
S.4757W
HIGH-POWER LED 3000K CRI90 315lm Rated luminaire luminous flux 28lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 31°C
S.7960W
4 HIGH-POWER LEDs 3000K CRI90 480lm Rated luminaire luminous flux 345lm
Rated input power 7W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
S.7961W
4 HIGH-POWER LEDs 3000K CRI90 480lm Rated luminaire luminous flux 327lm
Rated input power 7W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
E(lx) 3000K
h(m)
5.0 0.0 4.0 0.0 3.0 0.0 2.0 0.5 1.0 1.5
0(m)
70°
Transparent glass
0.1 m
12°
h(m)
5.0 3.0 4.0 5.0 3.0 12.0 2.0 34.0 1.0 91.0
E(lx) 3000K 12°
0.1 m
0.1 m
0(m)
h(m)
5.0 0.5 4.0 2.0 3.0 2.5 2.0 6.5 1.0 60.0
E(lx) 3000K ASY
=5°
C0 6°+6° C90 54°
Transparent glass
Ø 153
Ø 237
Beam lenses available on request with no surcharge: 65° and 10°x44°
T 37°C
S.7962W
1 COB LED 3000K CRI90 350lm
Rated luminaire luminous flux 284lm 3.0 1.5 Rated input power 4,3W 2.0 5.0
0(m)
33°
h(m)
5.0 0.0 4.0 0.5
E(lx) 3000K 33°
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
0.1 m
1.0 37.0 0(m)
157
175

RING Stainless-steel (Maximum weight 5000 Kg – 30Km/h)
Acid-etched glass
S.4971W.19
LED 3000K CRI90 1200lm
Rated luminaire luminous flux 165lm
Rated input power 10,1W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 35°C
S.7920W.19 h(m)
E(lx) 3000K 79°
h(m)
5 0.0 4 0.0 3 0.0 2 0.5 1 2.0
79°
0.1 m 0(m)
Transparent glass
E(lx) 3000K
12°
9 HIGH-POWER LED 3000K CRI90 1390lm Rated luminaire luminous flux 1001lm Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
S.7921W.19
9 HIGH-POWER LED 3000K CRI90 1390lm Rated luminaire luminous flux 950lm
Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
10.0 2.0 8.0 3.5 6.0 8.0 4.0 25.0 2.0 114.0
0(m)
12°
0.1 m
0.1 m
h(m)
10.0 0.0
8.0 0.5 6.0 1.0 4.0 5.0 2.0 40.0
E(lx) 3000K
=5°
C0 6°+6° C90 54°
ASY
Transparent glass
Ø 235
Ø 297
T 37°C
S.7922W.19
h(m)
10.0 0.5
Beam lenses available on request with no surcharge: 65° and 10°x44°
0(m)
E(lx) 3000K
33°
1 COB LED 3000K CRI90 1470lm 8.0 1.0
33°
Rated luminaire luminous flux 1029lm Rated input power 14W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics T 37°C
0.1 m
6.0 2.0 4.0 6.0 2.0 41.0
0(m)
158
195

FLAT Aluminium (Maximum weight 3500 Kg – 30Km/h)
Acid-etched glass
S.4771W
LED 3000K CRI90 1200lm
Rated luminaire luminous flux 165lm
Rated input power 10,1W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 35°C
S.7970W
9 HIGH-POWER LED 3000K CRI90 1390lm Rated luminaire luminous flux 1001lm Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
S.7971W
9 HIGH-POWER LED 3000K CRI90 1390lm Rated luminaire luminous flux 950lm
Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
h(m)
5 0.0 4 0.0 3 0.0 2 0.5 1 2.0
E(lx) 3000K 79°
79°
0.1 m
0(m)
Transparent glass
12°
h(m)
10.0 2.0
8.0 3.5 6.0 8.0 4.0 25.0 2.0 114.0
E(lx) 3000K
0.1 m
0.1 m
0(m)
h(m) 10.0 8.0 6.0 4.0 2.0
E(lx) 3000K
12°
=5°
C0 6°+6° C90 54°
0.0 0.5 1.0 5.0
40.0 0(m)
ASY
Transparent glass
Ø 220
Ø 297
Beam lenses available on request with no surcharge: 65° and 10°x44°
T 37°C
S.7972W
h(m)
10.0 0.5
E(lx) 3000K
33°
1 COB LED 3000K CRI90 1470lm 8.0 1.0
33°
Rated luminaire luminous flux 1029lm Rated input power 14W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics T 37°C
0.1 m
6.0 2.0 4.0 6.0 2.0 41.0
0(m)
159
195

MEGARING Stainless-steel (Maximum weight 5000 Kg – 30Km/h)
Acid-etched glass
Transparent glass
Transparent glass
S.4908W.19 h(m)
E(lx) 3000K
92°
LED 3000K CRI90 1070lm
Rated luminaire luminous flux 269lm
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 39°C
5 0.0 4 0.0 3 0.0 2 0.5 1 5.0
0(m)
92°
0.1 m
S.7930W.19
16 HIGH-POWER LED 3000K CRI90 2245lm Rated luminaire luminous flux 1616lm Rated input power 27W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
S.7931W.19
16 HIGH-POWER LED 3000K CRI90 2245lm
Rated luminaire luminous flux 1535lm Rated input power 27W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
E(lx) 3000K
h(m)
10.0 3.0
8.0 5.0 6.0 11.0 4.0 40.0 2.0 172.0
0(m)
12°
E(lx) 3000K
12°
0.1 m
0.1 m
h(m)
10.0 0.5
8.0 1.0 6.0 2.0 4.0 7.0 2.0 59.0
0(m)
=5°
C0 6°+6° C90 54°
ASY
Beam lenses available on request with no surcharge: 65° and 10°x44°
T 37°C
S.7932W.19 h(m)
E(lx) 3000K
33°
1 COB LED 3000K CRI90 2950lm
Rated luminaire luminous flux 2061lm Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
10.0 1.0 8.0 1.5 6.0 3.5 4.0 12.0 2.0 108.0
0(m)
33°
Ø 315
Ø 375
0.1 m
160
200

MEGAFLAT Aluminium (Maximum weight 3500 Kg – 30Km/h)
Acid-etched glass
S.4708W
LED 3000K CRI90 1070lm
Rated luminaire luminous flux 269lm
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
T 39°C
E(lx) 3000K 92°
h(m)
5 0.0 4 0.0 3 0.0 2 0.5 1 5.0
92°
0.1 m
0(m)
Transparent glass
S.7980W
16 HIGH-POWER LED 3000K CRI90 2245lm Rated luminaire luminous flux 1616lm Rated input power 27W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
S.7981W
16 HIGH-POWER LED 3000K CRI90 2245lm
Rated luminaire luminous flux 1535lm Rated input power 27W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
E(lx) 3000K
h(m)
10.0 3.0
8.0 5.0 6.0 11.0 4.0 40.0 2.0 172.0
0(m)
12°
0.1 m
0.1 m
h(m)
10.0 0.5
8.0 1.0 6.0 2.0 4.0 7.0 2.0 59.0
0(m)
E(lx) 3000K
12°
=5°
C0 6°+6° C90 54°
ASY
Transparent glass
Beam lenses available on request with no surcharge: 65° and 10°x44°
T 37°C
S.7982W h(m)
1 COB LED 3000K CRI90 2950lm
Rated luminaire luminous flux 2061lm Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
T 37°C
10.0 1.0 8.0 1.5 6.0 3.5 4.0 12.0 2.0 108.0
0(m)
33°
E(lx) 3000K
33°
Ø 300
Ø 375
0.1 m
161
200

162
Groupama Aréna, Budapest Hungary @ ph. Tamàs Bujnovszky / Be light Kft.

163

164
Chiswick business park, London, UK © Concord by Havells Sylvania

Microsparks
Inground recessed drive-over
The recessed drive-over MICROSPARKS range combines very shallow recessing depth, high mechanical strength, efficient optics with excellent light control. MICROSPARKS are perfect to illuminate walking paths, squares and areas where there is limited access to slow moving vehicles.
Suit
Surface mounted drive-over
To illuminate driveways without recessing into the paving is now possible with SUIT, a high performance luminaire that allows an easy and safe installation without recessing thanks to its anchor flange. For application in non drive-over areas SUIT can be installed without flange. It is available with 1 window, 2 windows at 180° or 90° and 4 windows.
www.simes.it/microsparks-suit 165

MICROSPARKS Inground recessed drive-over
Die-cast EN AB-44100 aluminium housing with high corrosion resistance. Protective guard of 8 mm thickness. Toughened prismed glass diffuser. Stainless steel screws.
Pre-wired luminaire with neoprene cable and connector.
Recessing box in polypropylene. Silicone gaskets.
Double powder paint.
Driveover 2000 Kg at 10 Km/h
Colour:
Aluminium grey (code 14)
Protection class
IP65 / IP67
Isolation class
CLASS I y Mechanical resistance
IK 10
Leds 3000K CRI80 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
The recessing box must be placed at ground level.
20 cm drainage gravel must be used under the recessing box to allow easy water evacuation.
Connection to the main line has to be done into junction boxes.
S.5506
4 way connector for through wiring (in/out).
Walkway, Locarno, Switzerland © SIMES S.p.a.
166

MICROSPARKS
Microsparks 1 window
S.5621N
1 HIGH-POWER LED 4000K CRI90 190lm Rated luminaire luminous flux 15lm
Rated input power 3,5W
220V-240V AC 50/60Hz / DC Not Dimmable
T 30°C
Ø 103
Ø 187
lux
Microsparks 2 windows
Microsparks 12 windows
Ø 103
Ø 187
S.5611N
1 HIGH-POWER LED 4000K CRI90 190lm Rated luminaire luminous flux 34lm
Rated input power 3,5W
220V-240V AC 50/60Hz / DC Not Dimmable
T 30°C
lux
S.5601N
1 HIGH-POWER LED 4000K CRI90 190lm Rated luminaire luminous flux 40lm
Rated input power 3,5W
220V-240V AC 50/60Hz / DC Not Dimmable
T 30°C
Ø 103
Ø 187
lux
167
195 195 195

SUIT Surface mounted drive-over
Die-cast EN AB-44100 aluminium housing with high corrosion resistance.
Reflector in polymers covered with 99.98% pure aluminium.
Protective guard of 5 mm thickness. Policarbonate diffuser.
Stainless steel screws. Pre-wired luminaire with 5m of neoprene cable.
Silicone gaskets.
Double powder paint.
Colour:
Aluminium grey (code 14)
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
Protection class
IP65 / IP67
Isolation class
CLASSE I y Mechanical resistance
IK 10 SUIT
Leds 3000K CRI80 versions are available on request.
FOR APPLICATIONS IN DRIVEWAY AREAS
MINISUIT/SUIT is installed with the drive over anchor flange.
Driveover 4000 Kg at 10 Km/h.
PATENTENTED REGISTERED DESIGN
Ø 185
Ø 235
S.5699
ANCHOR FLANGE TO BE CEMENTED TO THE GROUND for MINISUIT
The flange is provided with the necessary fixing A4 screws in stainless steel.
S.5690
ANCHOR FLANGE TO BE CEMENTED TO THE GROUND for SUIT
The flange is provided with the necessary fixing A4 screws in stainless steel.
Conference and Exhibition Centre, Oviedo, Spain © Estudios Técnico de Alumbrado
168
263
185

MINISUIT
Minisuit 1 window
Minisuit 2 windows 180°
S.5695N
HIGH-POWER LED 4000K CRI70 156lm Rated luminaire luminous flux 48lm
Rated input power 2,2W
220V-240V AC 50/60Hz / DC Not Dimmable ( Anchor flange S.5699 not included )
T 37°C
S.5696N
HIGH-POWER LED 4000K CRI70 312lm Rated luminaire luminous flux 95lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable ( Anchor flange S.5699 not included )
T 37°C
S.5697N
HIGH-POWER LED 4000K CRI70 312lm Rated luminaire luminous flux 95lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable ( Anchor flange S.5699 not included )
T 37°C
S.5698N
HIGH-POWER LED 4000K CRI70 624lm Rated luminaire luminous flux 190lm
Rated input power 5,5W
220V-240V AC 50/60Hz / DC Not Dimmable ( Anchor flange S.5699 not included )
T 37°C
lux
Minisuit 2 x 90°
lux
Minisuit 4 windows
lux
lux
169
41 Ø 185 41 Ø 185
41 Ø 185 41 Ø 185

SUIT
Suit 1 window
Suit 2 windows 180°
S.5691N
HIGH-POWER LED 4000K CRI70 283lm Rated luminaire luminous flux 101lm
Rated input power 3,6W
220V-240V AC 50/60Hz / DC Not Dimmable ( Anchor flange S.5690 not included )
T 40°C
S.5692N
HIGH-POWER LED 4000K CRI70 566lm Rated luminaire luminous flux 212lm
Rated input power 6,2W
220V-240V AC 50/60Hz / DC Not Dimmable ( Anchor flange S.5690 not included )
T 40°C
S.5693N
HIGH-POWER LED 4000K CRI70 566lm Rated luminaire luminous flux 209lm
Rated input power 6,2W
220V-240V AC 50/60Hz / DC Not Dimmable ( Anchor flange S.5690 not included )
T 40°C
S.5694N
HIGH-POWER LED 4000K CRI70 856lm Rated luminaire luminous flux 258lm
Rated input power 7,9W
220V-240V AC 50/60Hz / DC Not Dimmable ( Anchor flange S.5690 not included )
T 40°C
Suit 2 x 90°
170
Suit 4 windows
lux
lux
lux
lux
50 Ø 235 50 Ø 235
50 Ø 235 50 Ø 235

171
MAINA Headquarter Arch. Gianni Arnaudo, Fossano, Cuneo, Italy © Ph.Mario Bertani

Structural Wall recessed
Ghost 174 Ghost 182 Ghost
for Cast Concrete for Cladding for Insulation
panels
Wall recessed
Blinker 202 Marker 208 Walker
Skill wood 16 Concrete wall 10
192 Ghost 194 for construction
materials to be plastered
208 Skill 212
172

Brick of Light 196
Brique 220 Eos 226 Step 230 Nanoled 98 Stainless Steel
173

174

Ghost
for Cast concrete
Design M.Sadler
Ghost for cast concrete is a luminous void created through a specific recessed housing fixed to the shutters before casting. The LED engine is only installed when the concrete surrounding the housing is completely dry, filling the void with light.
“The light blade comes from the concrete. When it’s off, it disappears. No artifice, just a void in the concrete with brutal and magic inspiration: actually a technical prodigy, directly cast into the concrete, the product of a sophisticated and invisible genius to fuse architecture and light in a natural way.” M. Sadler
2016
Ghost Linear
Ghost Vertical Ghost Horizontal
www.simes.it/ghost-castconcrete 175

GHOST For cast concrete
Ghost is a lighting void that is obtained from a polypropylene housing anchored to the retaining panels before pouring the concrete.
Ghost is composed of two elements: the housing and the lighting element.
The housing is in polypropylene (in aluminium for LINEAR versions) and it consists of two complementary parts:
– A jig (1A), which forms the housing, and is extracted together with the retaining panel after completing the casting and removing the anchor screws (2);
– The housing (1B) that remains embedded inside the casting and houses the lighting element.
(The housing is supplied with bolts, locking system and stickers to be applied on the outside of the retaining panels so to secure a perfect alignment for multiple installations of each housing when pouring the concrete).
The cavity will have the finish obtained directly from the concrete cast.
The Lighting element (3) in die cast aluminium is secured to to the recessed casing (1B) with screws and remains completely hidden within the void.
GHOST HORIZONTAL
Pre-wired luminaire with 0,3m neoprene cable and connector in the recessed box.
CLASS I y GHOST VERTICAL
Luminaire supplied with 6m of cable. CLASS I y
MICROGHOST SQUARE
Requires a remote constant voltage driver. Pre-wired luminaire with 3m of neoprene cable.
CLASS III 
MINIGHOST and GHOST SQUARE
Pre-wired luminaire with 0,3m neoprene cable. CLASS I y
GHOST LINEAR
Luminaire supplied with 6m of cable.
CLASS II q
Protection class
IP65
Mechanical resistance
IK 10
Leds 4000K CRI80 versions are available on request.
PATENTED REGISTERED DESIGN
Finishing:
Cast cement
Suitable for reinforced concrete
1B 3
1B
2
1A
176
Luminaire guide video

GHOST For cast concrete
Ghost Horizontal
C.8022W
2 housings in polypropylene
with locking system
+
Lighting element with MID-POWER LEDs 3000K CRI80 880lm
Rated luminaire luminous flux 490lm
Rated input power flux 10W
220V-230V AC 50/60Hz Phase-cut dimmable
H=
0.5 m
lux
Ghost Vertical
C.8024W
2 housings in polypropylene
with locking system
+
Lighting element with 1 COB LED 3000K CRI80 800lm
Rated luminaire luminous flux 612lm
Rated input power flux 7,6W
220V-240V AC 50/60Hz / DC Not Dimmable
H=
0.5 m
290
115
lux
135
This luminaire is manufactured on site
during the concrete casting of the wall with hand crafted procedures; therefore, small imperfections caused by the low accurance of the casting, subsidence of the concrete surface, actual and future cracks, colour ripples and variations over time, will be deliberately present and they are a feature of the concrete, proving the hand-made manufacturing procedure.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
75
177
350
535
210
100

GHOST For cast concrete Microghost Square
Minighost Square
Ghost Square
C.8030W
2 housings in polypropylene
with locking system
+
Lighting element with MID-POWER LEDs 3000K CRI80 320lm
Rated luminaire luminous flux 240lm Rated input power flux 4W 24V DC
Requires a remote constant voltage driver (page 468-469)
C.8028W
2 housings in polypropylene
with locking system
+
Lighting element with MID-POWER LEDs 3000K CRI80 490lm
Rated luminaire luminous flux 268lm
Rated input power flux 6W
220V-230V AC 50/60Hz Phase-cut dimmable
90
H=
C.8026W
2 housings in polypropylene
with locking system
+
Lighting element with MID-POWER LEDs 3000K CRI80 1150lm
Rated luminaire luminous flux 550lm
Rated input power flux 12W
220V-230V AC 50/60Hz Phase-cut dimmable
H=
0.5 m
0.5 m
155
lux
95
lux
110
lux
178
H =0.5 m
210
125
260
190
100
435 355
205

179

GHOST For cast concrete Ghost Linear L 240mm
Ghost Linear L 430mm
Ghost Linear L 810mm
Ghost Linear L 1570mm
C.8034W
2 housings in aluminium
with locking system
+
Lighting element with MID-POWER LEDs 3000K CRI80 382lm
Rated luminaire luminous flux 266lm Rated input power flux 4W
220V-240V AC 50/60Hz / DC Not Dimmable
Accessory drilling jig C.8033
Template for drilling *
C.8036W
2 housings in aluminium
with locking system
+
Lighting element with MID-POWER LEDs 3000K CRI80 764lm
Rated luminaire luminous flux 532lm Rated input power flux 7,5W
220V-240V AC 50/60Hz / DC Not Dimmable
Accessory drilling jig C.8035
Template for drilling *
C.8038W
2 housings in aluminium
with locking system
+
Lighting element with MID-POWER LEDs 3000K CRI80 1528lm
Rated luminaire luminous flux 1044lm Rated input power flux 14W
220V-240V AC 50/60Hz / DC Not Dimmable
Accessory drilling jig C.8037
Template for drilling *
C.8040W
2 housings in aluminium
with locking system
+
Lighting element with MID-POWER LEDs 3000K CRI80 3056lm
Rated luminaire luminous flux 2077lm Rated input power flux 28W
220V-240V AC 50/60Hz / DC Not Dimmable
Accessory drilling jig C.8039
Template for drilling *
240
* The template for drilling facilitates the alignment of the recessed profile of Ghost Continuous Line. You require only one template for each size which can be used again.
180
H=
0.5 m
430
90
lux
H=
0.5 m
lux
H=
0.5 m
0.5 m
810
90
lux
lux
90
H=
1570
90
48 48
48
48
88 88
88
88

GHOST Continuous line for cast concrete
All Ghost Linear versions may be connected to obtain continuous linear cavities. To fix the appropriate number of articles to achieve the length desired it is recommended to start with multiples of the longest versions and subsequently with the shorter ones as end pieces.
Taking the four standard sizes available in the catalogue any situation can be solved with a maximum run-out of 22 cm. The run-out may be divided at the beginning and at the end of the wall as a free space between the final part of the wall and the luminous cavity ( take into consideration at least 5 cm as a free space).
To facilitate the operation use a drilling template available as an accessory for every Ghost Linear version. For each version used one only drilling template is required.
Consult a Structural Engineering company to have
an appropriate framework and thickness of the wall calculated. Please keep in mind that the Ghost Linear in Continuous Line represents a linear continuous cavity of 9 cm deep.
Example 1: WALL OF 344 cm
Continuous Ghost Linear of 334 cm + 5 cm gaps each end
Ghost Linear L 24 cm
Ghost Linear L 43 cm
Ghost Linear L 81 cm
Ghost Linear L 157 cm
End cap
1 79 1
1 155
334 cm
344 cm
5 cm
1 22 1
1 41 1
Recessed housing
1
1
• • •
5 cm
Example 2: WALL OF 603 cm
155
155
22 1
1 cm (end cap) + ( 155 cm x 2 ) + 22 cm (recessed housings) + 1 cm (end cap) = 334 cm 344 cm (wall length) – 334 cm (total length of void) = 10 cm (total clear gap)
10 cm / 2 = 5 cm (deviation each end)
Continuous Ghost Linear of 587 cm + 8 cm gaps each end
1155 155 155 79411
• • •
8 cm
1 cm (end cap) + ( 155 cm x 3 ) + 79 cm + 41 cm (recessed housings) + 1 cm (end cap) = 587 cm 603 cm (wall length) – 587 cm (total length of void) = 16 cm (total clear gap)
16 cm / 2 = 8 cm (deviation each end)
587 cm
603 cm
Luminaire guide video
181

182

Ghost
for Cladding
Exterior fibre cement siding panels (with anodised aluminium front panel)
Stone finish (the front aperture finished in the same material)
Wood (with anodised aluminium front panel)
Mosaic or Tiles (the front aperture is finished in the same material)
Ghost continous line application
Ghost for cladding or plasterboard is the most recent development of the range. It comes with an anodised aluminium recessed housing that can be finished in many different materials such as plasterboard, mosaic, ceramic tiles or stone finish.
The fixtures aperture has also been developed with a slanted front panel accessory in anodised aluminium that can be removed so to take different types of material finish, especially when the use of different materials may prove difficult when applying on the slanted aperture. Ghost has been developed so that it can be completely covered with the same material finish as the wall to totally integrate the fixture into the architecture and create discreet lighting effects.
Ghost with front aperture finished in the same material
Ghost with anodised aluminium front panel
www.simes.it/ghost-cladding 183

Plasterboard
Cladding
GHOST For Cladding
Ghost for cladding can be installed in plasterboard panels for indoors, exterior fibre cement siding panels, breeze blocks or other construction materials that require a surface finish. A fixture that has been developed to be totally integrated into the architecture. The slanted front aperture can either be in anodised aluminium or it can be finished with
the same material finish as the wall. The front lip of the recessed housing and the aluminium sides of the front aperture will remain visible.
Procedure for Plasterboard or exterior fibre cement siding panels
1. Position the conduit for the electrical feed.
2. Fix the product to the plasterboard panel.
3. Cover the gaps between the panels with a mesh and plaster over.
4. Complete the surface finish
5. The fixture is supplied with a slanted front panel accessory in anodised aluminium. For indoor applications this panel can be removed and then finished in plasterboard; for outdoor applications we suggest to use this panel (a 19mm recess depth has been provided for the final finish if the panel is not used).
6. Once the plaster is dry you can fit the LED profile into the void.
This is the procedure for other walls built on site:
1. Cut away and position the conduit for the electrical feed;
2.Create a niche and recess the fixture housing and align correctly;
3. Cement the housing into the niche and use a gripping mesh to cover both the wall and the housing;
4. Cement the fixtue into the wall, cut the gripping mesh around the fixtures aperture and continue with the finish by applying the relative material to the slanted aperture (19mm recess depth has been provided for the final finish if the panel is not used).
5.The fixture is supplied with an anodised aluminium front panel. You
can decide to use this panel so to have a complete aperture in anodised aluminium or without so to render the aperture in the same material finish as the rest of the surface.
6. Once the cladding is dry you can fit the LED profile into the void.
MICROGHOST SQUARE
Requires a remote constant voltage driver.
Pre-wired luminaire with 3m of neoprene cable.
CLASS III  GHOST LINEAR
Luminaire supplied with 6m of cable. CLASS II q
Protection class
IP65
Mechanical resistance
IK 10
Leds 4000K CRI80 versions are available on request.
PATENT PENDING REGISTERED DESIGN
NOTE The aluminium front panel
can eventually be painted (care of
the installer) but never covered with other materials as this will obstruct the installation or removal of the lighting element.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
184
Luminaire guide video

GHOST For Cladding
Microghost L 72 mm for Cladding
C.8330W
Housings in aluminium
+
Lighting element with MID-POWER LEDs 3000K CRI80 96lm
Rated luminaire luminous flux 67lm Rated input power flux 1W 24V DC
Requires a remote constant voltage driver (page 468-469)
C.8334W
Housings in aluminium
+
Lighting element with MID-POWER LEDs 3000K CRI80 382lm
Rated luminaire luminous flux 266lm Rated input power flux 4W
220V-240V AC 50/60Hz / DC Not Dimmable
C.8336W
Housings in aluminium
+
Lighting element with MID-POWER LEDs 3000K CRI80 764lm
Rated luminaire luminous flux 532lm Rated input power flux 7,5W
220V-240V AC 50/60Hz / DC Not Dimmable
C.8338W
Housings in aluminium
+
Lighting element with MID-POWER LEDs 3000K CRI80 1528lm
Rated luminaire luminous flux 1044lm Rated input power flux 14W
220V-240V AC 50/60Hz / DC Not Dimmable
C.8340W
Housings in aluminium
+
Lighting element with MID-POWER LEDs 3000K CRI80 3056lm
Rated luminaire luminous flux 2077lm Rated input power flux 28W
220V-240V AC 50/60Hz / DC Not Dimmable
72
80
Ghost L 240 mm for Cladding
240
1570
80
430
80
80
Ghost L 430 mm for Cladding
H=
H=
0.5 m
0.5 m
0.5 m
lux
lux
H=
lux
Ghost L 810 mm for Cladding
810
80
H=
0.5 m
lux
Ghost L 1570 mm for Cladding
H=
0.5 m
lux
185
72
72
180
180
72
72
180
180
180
72

GHOST Continuous line for Cladding
Ghost for cladding can be connected to obtain continuous linear cavities, only for surface finish with mosaics, ceramic tiles and stone and only when the front aperture is finished in the same material (care of the installer). We do not suggest the use of anodized aluminum panel as the gap between each panel in the front aperture will be visible.
All Ghost Linear versions may be connected to obtain continous linear cavities. To fix the appropriate
number of articles to achieve the length desired it is recommended to start with multiples of the longest versions and subsequently with the shorter ones as end pieces.
Taking the four standard sizes available in the catalogue any situation can be solved with a maximum run-out of 23 cm. The run-out may be divided at the beginning and at the end of the wall as a free space between the final part of the wall and the luminous cavity ( take into consideration at least 5 cm as a free space).
Example 1: WALL OF 354 cm
End cap
Ghost L 240 mm
Ghost L 430 mm
Ghost L 810 mm
Ghost L 1570 mm
0,5
0,5
0,5
0,5
23 0,5
42 0,5
336 cm
354 cm
9 cm
80
0,5
Recessed housing
0,5
CONTINUOUS LINE FOR CLADDING of 336 cm + 9 cm gaps each end
0,5 156 156
23 0,5
156
• • •
9 cm
Example 2: WALL OF 603 cm
0,5 cm (end cap) + ( 156 cm x 2 ) + 23 cm (recessed housings) + 0,5 cm (end cap) = 336 cm 354 cm (wall length) – 336 cm (total length of void) = 18 cm (total clear gap)
18 cm / 2 = 9 cm (deviation each end)
CONTINUOUS LINE FOR CLADDING of 591 cm + 6 cm gaps each end
0,5
• • •
6 cm
156 156
156
80
42 0,5
6 cm
0,5 cm (end cap) + ( 156 cm x 3 ) + 80 cm + 42 cm (recessed housings) + 0,5 cm (end cap) = 591 cm 603 cm (wall length) – 591 cm (total length of void) = 12 cm (total clear gap)
12 cm / 2 = 6 cm (deviation each end)
591 cm
603 cm
186

187
Kings College New Science Gallery, London, Great Britain © LTS Architects, Zumtobel UK, ph. Peter Landers

GHOST For Cladding with indoor plasterboard
The standard fitting is supplied with an anodised aluminum front panel to complete the housing. You can choose to keep it to finish the entire luminous void in aluminum, or take it off the inclined surface with the cladding material used for the wall (19 mm of recessing depth has been provided for the final finish). The front lip of the recessed housing and the aluminium sides of the front aperture will remain visible.
Anodised aluminum front panel included
1
12
Surface finish
Plasterboard panel
Thickness
Anodised aluminum front panel
6
19
1
12
Surface finish
Plasterboard panel
Thickness
Plasterboard front panel
6
19
19
Plasterboard front panel care of the installer
GHOST For Cladding with Exterior Fibre Cement siding panels (Aquapanel® type)
The standard fitting is supplied with an anodised aluminum front panel to complete the housing. For this type of application it is advisable to use the aluminium front panel accessory as an outdoor plaster finish inside the slanted aperture could prove difficult. The front lip of the recessed housing, the aluminium sides of the front aperture and the anodised aluminium front panel will remain visible.
Anodised aluminum Slide included
7
12
Outdoor surface finish
Outdoor Plasterboard panel
Anodised aluminum front panel
188
19
19
19

GHOST For Cladding with mosaic finish, ceramic tiles, stone finish
The standard fitting is supplied with an anodised aluminum front panel to complete the housing. You can choose to keep it to finish the entire luminous void in aluminum, or take it off the inclined surface with the cladding material used for the wall (19 mm of recessing depth has been provided for the final finish). The front lip of the recessed housing and the aluminium sides of the front aperture will remain visible.
Anodised aluminum front panel included
Ceramic or Stone cladding
Glue
Anodised aluminum front panel
19
19
Ceramic or Stone front finish care of the installer
Ceramic or Stone cladding
Glue
Ceramic or Stone finish
GHOST For Cladding with mosaic, ceramic tiles, stone finish
Ghost for cladding can be connected to obtain continous linear cavities, only for surface finish with mosaics, ceramic tiles and stone and only when the front aperture is finished in the same material (care of the installer).
We do not suggest the use of anodized aluminum panel as the gap between each panel in the front aperture will be visible.
189
19
19

190
Private villa, Italy – Arch. Duilio Damilano © ph. Mario Bertani

Ghost
for Insulation panels
Ghost for insulation panels is a wall mounted signal lighting fixture. The luminous housing is installed together with the other insulating panels of polystyrene. In this way the light is completely integrated in the insulated “shell” of the architecture without jeopardizing the thermal insulation and therefore maintain the energy efficiency rating of the building.
Ghost
for Construction materials with plaster finish
Ghost for construction materials is a further development of the Ghost range that allows to create lit voids into walls built from any material that require a plaster finish. The special recessed housing protrudes by 15mm so to consider the various layers of plaster so to give a perfect flush finish.
The fixtures inclined aperture can be painted and is therefore completely integrated into the architecture.
191

GHOST For Insulation panel
Ghost for insulation panel may be installed inside the exterior insulating panel. The degree of insulation of
the house will stay unchanged for it is manufactured of the same type of polystyrene insulation.
Attention should be paid though to the positioning of the corrugated tube for mains electrical connection.
The height of Ghost for insulation panel has been designed to take on standard AED35 (50cm) insulating blocks while the thickness (10cm) facilitates the integration in insulating panels with the same or greater thickness.
The cavity is pre-finished and ready for painting.
After installation the finish of the wall will proceed as usual:
1. Lay the grid, first levelling;
2. Carve the grid at the Ghost’s cavity;
3. Second levelling and possible whitening;
4. At the end of the work install the lighting body.
MICROGHOST SQUARE
Requires a remote constant voltage driver. Pre-wired luminaire with 3m of neoprene cable.
CLASS III 
GHOST HORIZONTAL
Pre-wired luminaire with 0,3m neoprene cable and connector in the recessed box.
CLASS I y
Protection class
IP65
Mechanical resistance
IK 10
Leds 4000K CRI80 versions are available on request.
PATENT PENDING REGISTERED DESIGN
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
192
Luminaire guide video

GHOST For Insulation panel Microghost Square for insulation panel
250 100
Ghost Horizontal for insulation panel
C.8130W
AE D35 polystyrene block with
housings in polypropylene
+
Lighting element with MID-POWER LEDs 3000K CRI80 320lm
Rated luminaire luminous flux 240lm Rated input power flux 4W 24V DC
Requires a remote constant voltage driver (page 468-469)
500 100
H =0.5 m
C.8122W
AE D35 polystyrene block with
housings in polypropylene
+
Lighting element with MID-POWER LEDs 3000K CRI80 880lm
Rated luminaire luminous flux 490lm
Rated input power flux 10W
220V-230V AC 50/60Hz Phase-cut dimmable
H=
0.5 m
lux
90
lux
290
www.simes.it/ghost-insulationpanels 193
100
500
100
500

194
Example: Wall in breeze blocks
GHOST For construction materials with plaster finish
Ghost for breeze block application is easily applied in walls made of perforated bricks or cement conglomerate.
The luminaire is designed to be wall mounted and completely integrated with the architecture of which it will take over the finish.
The cavity is pre-finished and ready for painting.
The procedure is as follows:
1. Plan the positioning of the corrugated tube for mains electrical connection;
2. Make a niche to insert the Ghost polystyrene block, paying attention to its aligning;
3. Lay the fixative grid that connects the cement conglomerate wall to the Ghost’s polystyrene block;
4. Enclose the luminaire in the wall, cut the grid at the Ghost’s cavity and finish off;
5. Once the work is finished, the luminaire may be installed.
MICROGHOST SQUARE
Requires a remote constant voltage driver. Pre-wired luminaire with 3m of neoprene cable.
CLASS III 
GHOST HORIZONTAL
Pre-wired luminaire with 0,3m neoprene cable and connector in the recessed box.
CLASS I y
Protection class
IP65
Mechanical resistance
IK 10
Leds 4000K CRI80 versions are available on request.
PATENT PENDING REGISTERED DESIGN
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
Luminaire guide video

GHOST For construction materials with plaster finish Microghost Square
155 85 15
C.8230W
AE D35 polystyrene block with
housings in polypropylene
+
Lighting element with MID-POWER LEDs 3000K CRI80 320lm
Rated luminaire luminous flux 240lm Rated input power flux 4W 24V DC
Requires a remote constant voltage driver (page 468-469)
90 100
Ghost Horizontal
C.8222W
AE D35 polystyrene block with
housings in polypropylene
+
Lighting element with MID-POWER LEDs 3000K CRI80 880lm
Rated luminaire luminous flux 490lm
Rated input power flux 10W
220V-230V AC 50/60Hz Phase-cut dimmable
355
290
85 15
100
H =0.5 m
H=
0.5 m
lux
lux
www.simes.it/ghost-construcionmaterials 195
100
230
100
230

196

Design P. Rizzatto
Brick of Light
Brick of Light camouflages itself with the brick texture not only by taking on the form and the dimensions of the brick, but also by adopting the same modes of handling, assembly and installation thanks to its characteristics of resistance and manageability. The restrained and basic archetype form allows a perfect integration in walls. It is endlessly declinable and talks together with the rhythm of the surfaces and appropriate lighting needs designed for integration with exposed brick surfaces such as:
exterior and interior
flush with walls, recessed or protruding on a flat masonry or curvilinear wall concave or convex
at the center or at an edge
isolated or arranged
at intervals or in a continuous line
free or according to a plan
Its compact geometry and its adaptability to enter into and identifying itself with the masonry itself, along with the solid glass, make it performant in terms of maintenance, perishability over time and resistance against vandalism.
“I took the light and made it tangible…” James Turrell
2018
www.simes.it/bricklight 197

BRICK OF LIGHT Wall recessed or stand alone
Punto Vespa, Corte Franca (Bs) Italy © SIMES S.p.A.
24V DC remote power supply
Luminaire hard wired with
5m single neoprene cable for installation in exposed brick walls or other construction materials in place.
With rechargeable battery
Luminaire operating on Lithium polymers fed Battery via a micro USB plug with a maximum power (battery version) of 10 hours to be used as a portable decorative luminaire for the exterior.
Lateral ON-OFF and three step (30% – 60%- 100%) dimming switch. Supplied with Micro USB cable and power supply 230V.
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Diffuser made of acid-etched pressed glass.
Brick of Light has been developed with reference to the standard Italian brick. Double powder paint.
This luminaire has been manufactured with hand crafted procedures, therefore small imperfections, subsidence of the glass surface, actual cracks and future, colour ripples and variations over time,
are deliberately present and they are a feature of the glass, proving the hand-made manufacturing procedure.
Aluminium base colour:
White (code 01)
Protection class
IP65
Isolation class
CLASS III  Mechanical resistance
IK 08
Compression resistance
Full brick 60N/mm2 BRICK of LIGHT 100N/mm2
PATENT PENDING REGISTERED DESIGN
Leds 4000K CRI80 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
198

BRICK OF LIGHT
Stand alone version with rechargeable battery
24V DC Recessed version for remote power supply
Recessed full glass version
120
55
B.9005W
MID-POWER LEDs 3000K CRI80 300lm Rated luminaire luminous flux 70lm Rated input power 1,7W
Dimmable (3 steps 30%-60%-100%) Luminaire operating on rechargeable lithium polymers fed battery. Independent charge approx. 10 hours
250 120
B.9000W
MID-POWER LEDs 3000K CRI80 300lm Rated luminaire luminous flux 120lm Rated input power 2,9W 24V DC Requires a remote constant voltage driver
(page 468-469)
120
55
250 120
The luminaire has been designed to be integrated and recessed in the wall like a true construction material.
B.9009
Decorative wall element
120
55
250 120
The luminaire has been designed to be integrated and recessed in the wall like a true construction material.
199

200

201

202
Canadian Firefighters Memorial, Ottawa, Canada © PLANT Architect Inc. of Toronto / Sistemalux

Blinker
Wall recessed and bollard
With a clear personality, BLINKER is an elegant wall recess fitting, ideal for discrete illumination of walkways, passages and stairs. Completely flush with the wall, with no visible screws and glare-free light beams it offers visual comfort, creating a cosy and welcoming atmosphere.
www.simes.it/blinker 203

BLINKER Wall recessed and bollard
The Blue Planet Building Foundation, Kastrup, Denmark – Arch. 3XN © ph. Tom Jersø
S.5506
4 way connector for through wiring
(in/out).
To install inside the bollard H800mm or H1150mm.
MASK FOR PLASTER BOARD WALLS
available on request.
Die-cast EN AB-47100 aluminium housing, extruded EN AW-6060 aluminium structure (bollard version) with high corrosion resistance. Stainless steel screws.
Spring lock system for a total absence of visible screws.
Acid-etched glass diffuser.
Luminaire with one single cable entry and grommet (Wall recessed). Pre-wired luminaire with neoprene cable and connector (Bollard). Silicone gaskets.
Double powder paint.
Colours:
Aluminium grey (code 14)
Protection class
IP65
Isolation class
CLASS I y Mechanical resistance
IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
204

BLINKER
Microblinker
45 100
S.6060W
1 MID-POWER LED 3000K CRI90 379lm Rated luminaire luminous flux 30lm
Rated input power 4,8W
220V-240V AC 50/60Hz / DC Not Dimmable Recessing box not included
S.6063
RECESSING BOX
for MICROBLINKER 70 x 300 mm Depth 105 mm
104 16 3.5
0 0.5 1 1.5
1.5 ( lux )
2 ( m )
3000K 26°
Blinker
180 120
S.6080W
1 COB LED 3000K CRI90 2419lm
Rated luminaire luminous flux 567lm
Rated input power 22W
220V-240V AC 50/60Hz / DC Not Dimmable Recessing box not included
S.6083 RECESSING BOX for BLINKER 190 x 300 mm Depth 130 mm
H=
0.3 m
205
230
287
230 282

BLINKER
Miniblinker
100 120
Miniblinker bollard H 350 mm
S.6070W
1 COB LED 3000K CRI90 1565lm
Rated luminaire luminous flux 281lm
Rated input power 16,5W
220V-240V AC 50/60Hz / DC Not Dimmable Recessing box not included
S.6073
RECESSING BOX
for MINIBLINKER 110 x 300 mm Depth 130 mm
S.6050W
1 COB LED 3000K CRI90 1565lm
Rated luminaire luminous flux 281lm
Rated input power 16,5W
220V-240V AC 50/60Hz / DC Not Dimmable
H=
0.3 m
lux
120 120
lux
Miniblinker bollard H 800 mm
S.6090W
1 COB LED 3000K CRI90 1565lm
Rated luminaire luminous flux 281lm
Rated input power 16,5W
220V-240V AC 50/60Hz / DC Not Dimmable
120 120
206
Ø 120
S.6309
FLANGE FOR MINIBLINKER BOLLARD
Ø 120 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
800
350
230
287

BLINKER
Megablinker
157 165
Megablinker bollard H 1150 mm
S.6020W
1 COB LED 3000K CRI90 3763lm Rated luminaire luminous flux 759lm Rated input power 34,4W
220V-240V AC 50/60Hz Not Dimmable Recessing box not included
S.6023
RECESSING BOX
for MEGABLINKER 187 x 433 mm Depth 170 mm
S.6040W
1 COB LED 3000K CRI90 3763lm Rated luminaire luminous flux 759lm Rated input power 34,4W
220V-240V AC 50/60Hz Not Dimmable
H=
0.6 m
180 180
S.5310
FLANGE FOR MEGABLINKER BOLLARD
Ø 180 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
207
1150
323
402

208

Marker
Step riser recessed
MARKER is a luminaire designed to illuminate stairs and to be recessed in the riser of the steps. It is characterized by the complete absence of glare thanks to a positioning system of the light source, purposely engineered for the best control and downward orientation of light, safety and the visible comfort are totally guaranteed.
Walker
Wall recessed
Neat lines, essential shapes, high performances: WALKER is a wall recessed luminaire developed to enlighten floors with a wide and well-directed light avoiding any glare effect. The front frame, with no visible screws, is fixed through a spring locking system that preserves the elegant and well- proportioned aesthetic.
www.simes.it/marker-walker 209

Ricca Costruzioni, Castrezzato (Brescia), Italy, Arch. Giovanni Mario Gozzini © SIMES S.p.a.
MARKER Step riser recessed / WALKER Wall recessed
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Toughened glass diffuser.
Stainless steel screws.
Luminaire with double cable entry and cable glands.
Silicone gaskets.
Double powder paint.
Colour (MARKER):
Aluminium grey (code 14)
Colours (WALKER):
White
Aluminium grey (code 14)
Protection class
IP65
Isolation class
CLASS I y
Mechanical resistance of glass
IK 10
Leds 4000K CRI80 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
(code 01)
MARKER absence of glare
210

MARKER
310
86 3
S.6325W
MID-POWER LEDs 3000K CRI80 530lm Rated luminaire luminous flux 67lm
Rated input power 8,3W
220V-240V AC 50/60Hz / DC Not Dimmable Recessing box not included
Reinforced fixing system with screws.
S.6329
RECESSING BOX
for MARKER 305 x 79mm Depth 86mm
H=
0.1 m
lux
WALKER
310
86 3
S.6320W
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 346lm
Rated input power 13,5W
220V-240V AC 50/60Hz / DC Not Dimmable Recessing box not included
Spring lock system for a total absence of visible screws.
S.6329
RECESSING BOX
for WALKER 305 x 79mm Depth 86mm
H=
0.3 m
lux
211
65
65

212
Pedestrian bridge, Ivrea, Italy © ph. Filippo Alfero / Agenzia STS

Skill
Lighting for surface or flush wall mounting
SKILL represents a new concept of outdoor lighting fitting; a recessed/not-recessed luminaire for wall mounting. It concentrates all the advantages of a recessed fitting, but without requiring a housing in the wall. Due to this easy and user friendly method of installation, SKILL is a unique LED luminaire, assuring high lighting performance and total absence of glare. The most modern electronic technology is contained in the thickness of only 3 cm and provides an excellent quality of light while saving energy. SKILL is available as round, square and rectangular versions.
www.simes.it/skill 213

SKILL Lighting for surface or flush wall mounting
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Toughened glass diffuser.
Stainless steel screws.
Luminaire supplied with 1m of cable (Miniskill).
Luminaire with double cable entry and grommet (Skill and Skill 270). Luminaire with double grommets. Silicone gaskets.
Double powder paint.
Protection class
IP65
Isolation class
CLASS III  Miniskill 24V DC CLASS I y Skill
Mechanical resistance
IK 07 Miniskill Vertical IK 08
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
214
Colours:
White
Aluminium grey (code 14)
(code 01)

MINISKILL Surface wall mounting Miniskill round
Miniskill square
Miniskill vertical
Ø 115 28
105 28
60 28
S.6270W
MID-POWER LEDs 3000K CRI90 534lm Rated luminaire luminous flux 165lm
S.6270N
MID-POWER LEDs 4000K CRI90 584lm Rated luminaire luminous flux 172lm
Rated input power 5W 24V DC
S.6250W
MID-POWER LEDs 3000K CRI90 534lm Rated luminaire luminous flux 187lm
S.6250N
MID-POWER LEDs 4000K CRI90 584lm Rated luminaire luminous flux 182lm
Rated input power 5W 24V DC
S.6230W
MID-POWER LEDs 3000K CRI90 424lm Rated luminaire luminous flux 187lm
S.6230N
MID-POWER LEDs 4000K CRI90 505lm Rated luminaire luminous flux 133lm
Rated input power 4,7W 24V DC Miniskill requires costant voltage remote
power supply (page 468-469)
H=
3000K
0.3
m
3.0 2.4 1.8 1.2 0.6 0 0.6 1.2 1.8 2.4
4000K
2.4 1.8 1.2 0.6
MINISKILL Flush wall mounting
Miniskill becomes a wall recessed fitting totally flush with the wall by using the recessing box and the fixing kit.
S.6278
RECESSED BOX + FIXING KIT
for MINISKILL ROUND
(also suitable for fair faced concrete applications) Extractor tools included.
S.6256
RECESSED BOX + FIXING KIT
for MINISKILL SQUARE
(also suitable for fair faced concrete applications) Extractor tools included.
S.6239
RECESSED BOX + FIXING KIT
for MINISKILL VERTICAL
(also suitable for fair faced concrete applications) Extractor tools included.
H=
3000K
0.3
m
3.0 2.4 1.8 1.2 0.6 0 0.6 1.2 1.8 2.4
4000K
2.4 1.8 1.2 0.6
Ø 131 72
121 72
75 72
H=
3000K
0.3
m
3.0 2.4 1.8 1.2 0.6 0 0.6 1.2 1.8 2.4
4000K
2.4 1.8 1.2 0.6
215
130
121
115
105

SKILL Surface wall mounting Skill round
Skill square
Skill square 270mm
Skill rectangular
Ø 220
S.6280W
MID-POWER LEDs 3000K CRI90 1016lm Rated luminaire luminous flux 329lm
S.6280N
MID-POWER LEDs 4000K CRI90 1050lm Rated luminaire luminous flux 317lm
30 Rated input power 9,7W
220V-240V AC 50/60Hz / DC Not Dimmable
S.6260W
MID-POWER LEDs 3000K CRI90 1016lm Rated luminaire luminous flux 360lm
S.6260N
MID-POWER LEDs 4000K CRI90 1050lm Rated luminaire luminous flux 338lm
30 Rated input power 9,7W
220V-240V AC 50/60Hz / DC Not Dimmable
S.6255W
MID-POWER LEDs 3000K CRI90 2032lm Rated luminaire luminous flux 841lm
S.6255N
MID-POWER LEDs 4000K CRI90 2100lm Rated luminaire luminous flux 830lm
38 Rated input power 19,4W
220V-240V AC 50/60Hz / DC Not Dimmable
S.6240W
MID-POWER LEDs 3000K CRI90 1270lm Rated luminaire luminous flux 422lm
S.6240N
MID-POWER LEDs 4000K CRI90 1312lm Rated luminaire luminous flux 423lm
32 Rated input power 13W
220V-240V AC 50/60Hz / DC Not Dimmable
0.5 m
3000K
lux
4000K
200
270
270
216
H=
H=
3000K
0.5 m
lux
4000K
H=
3000K
0.5 m
lux
4000K
H=
3000K
0.5 m
lux
4000K
115 270
200

SKILL Flush wall mounting
Skill becomes a wall recessed fitting totally flush with the wall by using the recessing box and the fixing kit.
Ø 237 70
S.6288
RECESSED BOX + FIXING KIT
for SKILL ROUND
(also suitable for fair faced concrete applications) Extractor tools included.
S.6268
RECESSED BOX + FIXING KIT
for SKILL SQUARE
(also suitable for fair faced concrete applications) Extractor tools included.
217 70
290 80
S.6257
RECESSED BOX + FIXING KIT
for SKILL SQUARE 270mm
(also suitable for fair faced concrete applications) Extractor tools included.
288 75
S.6247
RECESSED BOX + FIXING KIT
for SKILL RECTANGULAR
(also suitable for fair faced concrete applications) Extractor tools included.
217
133
290
217

SKILL Bollard Die-cast EN AB-47100 aluminium
housing with high corrosion resistance. Toughened glass diffuser.
Stainless steel screws.
Pre-wired luminaire with neoprene cable and connector.
Protection class
IP65
Isolation class
CLASS II q
Mechanical resistance of glass
IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
S.6359
FLANGE FOR SKILL BOLLARD
Steel flange with stainless steel screws (to be buried in concrete).
S.5506
4 way connector for through wiring
(in/out).
To install inside the bollard.
Silicone gaskets.
Double powder paint.
218
Colour:
Aluminium grey
(code 14)

SKILL Bollard
Single emission
Double emission
S.6350W
MID-POWER LEDs 3000K CRI90 1330lm Rated luminaire luminous flux 243lm
Rated input power 18W
220V-240V AC 50/60Hz / DC Not Dimmable
320 80
lux
S.6360W
MID-POWER LEDs 3000K CRI90 2660lm Rated luminaire luminous flux 603lm
Rated input power 35W
220V-240V AC 50/60Hz / DC Not Dimmable
320 80
lux
219
220 220

220

Brique
Wall recessed
BRIQUE is a wall recessed luminaire available in many shapes and in several dimensions either with grid or with front ring. It’s classical design, the lighting performences and the low energy consumption, inscribe the BRIQUE family within the well-known and most used timeless fittings.
www.simes.it/brique 221

222
BRIQUE Wall recessed
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Opal toughened glass diffuser. Stainless steel screws.
Luminaire with one single cable entry and grommet (Minibrique Square). Luminaire with double cable entry and grommet (Minibrique, Brique and Megabrique Rectangular).
Protection class
IP54 Minibrique
IP65 Brique and Megabrique
Isolation class
CLASS I y Mechanical resistance
IK 07 Minibrique
IK 06 Brique and Megabrique
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
EPDM gaskets.
Double powder paint.
Colour:
Aluminium grey
(code 14)
CheungGaeChon Cultural Hall, South Korea © Hwangduck Eng. Co. Ltd.

BRIQUE Rectangular with trim Minibrique rectangular with trim
192 90 8
S.4552W
MID-POWER LEDs 3000K CRI90 452lm Rated luminaire luminous flux 125lm
Rated input power 6W
220V-240V AC 50/60Hz / DC Not Dimmable Recessing box not included
S.4553
RECESSING BOX for MINIBRIQUE
184 x 74 mm Width 90 mm
S.4511W
MID-POWER LEDs 3000K CRI90 950lm Rated luminaire luminous flux 356lm Rated input power 10W
220V-240V AC 50/60Hz Phase-cut dimmer Recessing box not included
S.4503
RECESSING BOX for BRIQUE 220 x 92 mm Width 95 mm
S.4525W
MID-POWER LEDs 3000K CRI90 1140lm Rated luminaire luminous flux 581lm
Rated input power 17W
220V-240V AC 50/60Hz / DC Not Dimmable Recessing box not included
S.4523
RECESSING BOX for MEGABRIQUE 263 x 135 mm Width 95 mm
H=
0.1 m
lux
Brique rectangular with trim
230 95 18
H=
0.2 m
lux
Megabrique rectangular with trim
270 95
18
H=
0.2 m
lux
223
145
102
82

BRIQUE Rectangular with grille Minibrique rectangular with grille
192 90 8
S.4551W
MID-POWER LEDs 3000K CRI90 452lm Rated luminaire luminous flux 34lm
Rated input power 6W
220V-240V AC 50/60Hz / DC Not Dimmable Recessing box not included
S.4553
RECESSING BOX for MINIBRIQUE
184 x 74 mm Width 90 mm
S.4502W
MID-POWER LEDs 3000K CRI90 950lm Rated luminaire luminous flux 89lm
Rated input power 10W
220V-240V AC 50/60Hz Phase-cut dimmer Recessing box not included
S.4503
RECESSING BOX for BRIQUE 220 x 92 mm Width 95 mm
S.4521W
MID-POWER LEDs 3000K CRI90 1140lm Rated luminaire luminous flux 172lm
Rated input power 17W
220V-240V AC 50/60Hz / DC Not Dimmable Recessing box not included
Brique rectangular with grille
230 95 18
Megabrique rectangular with grille
270 95
S.4523
18 RECESSING BOX for MEGABRIQUE
263 x 135 mm Width 95 mm
H=
H=
0.1 m
0.2 m
lux
H=
0.2 m
lux
224
145 102
82

MINIBRIQUE Square Minibrique square with trim
106 95
8
S.4543W
MID-POWER LED 3000K CRI90 105lm Rated luminaire luminous flux 35lm
Rated input power 2,4W
220V-240V AC 50/60Hz / DC Not Dimmable Recessing box not included
S.4613
RECESSING BOX for
MINIBRIQUE SQUARE 98 x 98 mm
Width 95 mm
S.4561W
MID-POWER LED 3000K CRI90 105lm Rated luminaire luminous flux 6lm
Rated input power 2,4W
220V-240V AC 50/60Hz / DC Not Dimmable Recessing box not included
S.4613
RECESSING BOX for MINIBRIQUE SQUARE 98 x 98 mm
Width 95 mm
H=
0.2 m
lux
Minibrique square with grille
106 95
8
H=
0.2 m
lux
225
106 106
98
98

226
PB Pedestrian Bridge, Millennium Park, Chicago, USA

Eos
Wall recessed
With its classical design, EOS is the wall recessed solution for projects that require an attractive design and maximum visual comfort. EOS is designed and engineered to have a glare free downward light distribution. The concealed horizontal glass diffuser has optimum vandal resistance.
www.simes.it/eos 227

EOS Wall recessed
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Opal toughened glass diffuser. Stainless steel screws
Luminaire with one single cable entry and grommet (Minieos).
Luminaire with double cable entry and grommet (Eos Square and Rectangular).
EPDM gaskets.
Double powder paint.
Protection class
IP55 Minieos Square IP65
Isolation class
CLASS I y
Mechanical resistance of diffusor
IK 05 Minieos Square IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
228
Colour:
Aluminium grey (code 14)

EOS
Minieos square
105
8
Eos square
230 100
19
Eos rectangular
275 95
18
S.4610W
MID-POWER LEDs 3000K CRI90 210lm Rated luminaire luminous flux 39lm
Rated input power 4W
220V-240V AC 50/60Hz / DC Not Dimmable Recessing box not included
S.4613
RECESSING BOX for MINIEOS SQUARE
98 x 98 mm Width 95 mm
S.4605W
MID-POWER LEDs 3000K CRI90 950lm Rated luminaire luminous flux 179lm
Rated input power 14W
220V-240V AC 50/60Hz / DC Not Dimmable Recessing box not included
S.4343
RECESSING BOX for EOS SQUARE
217 x 187 mm Width 100 mm
S.4615W
MID-POWER LEDs 3000K CRI90 1140lm Rated luminaire luminous flux 264lm
Rated input power 14,8W
220V-240V AC 50/60Hz / DC Not Dimmable Recessing box not included
S.4523
RECESSING BOX for EOS RECTANGULAR 263 x 135 mm Width 95 mm
95
H=
0.2 m
lux
H=
0.5 m
lux
H=
0.5 m
lux
229
145 200
105
70

230

Step
Wall recessed and bollard
Sharp and minimal design combined with a perfect light beam. STEP, equipped with LED source, creates a marked blade of light on the wall.
www.simes.it/step 231

STEP Wall recessed and bollard
“Le Palafitte” discotheque, Sulzano (Brescia), Italy © ph. Gianattilio Valli
S.5506
4 way connector for through wiring
(in/out).
To install inside the bollard.
S.4660
MASK FOR PLASTER BOARD WALLS
for STEP WALL RECESSED Hole 204x46mm
Die-cast EN AB-47100 aluminium housing and extruded EN AW-6060 aluminium structure (bollard version) with high corrosion resistance. Stainless steel screws.
Clear toughened glass diffuser. Luminaire with one single cable entry and grommet (Step Recessed). Pre-wired luminaire with neoprene cable and connector (Step Bollard). Silicone gaskets.
Double powder paint.
Colours wall recessed:
White
Aluminium grey (code .14)
Colour bollard:
Protection class
IP65
Isolation class
CLASS I y
Mechanical resistance of diffusor
IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
46
232
Aluminium grey (code .14)
(code .01)
204

STEP
Step wall recessed
S.4655W
MID-POWER LED 3000K CRI90 140lm Rated luminaire luminous flux 16lm
Rated input power 3W
220V-240V AC 50/60Hz / DC Not Dimmable Recessing box not included
S.4653
RECESSING BOX
for STEP WALL RECESSED 80 x 210 mm
Depth 85 mm
47 6.0 1.5
0.5 ( lux )
3000K
15°
54 85
67
15° 0 0.5 1 1.5 2 ( m )
Step bollard H 450 mm
15°
S.4665W
MID-POWER LED 3000K CRI90 140lm Rated luminaire luminous flux 16lm
Rated input power 3W
220V-240V AC 50/60Hz / DC Not Dimmable
47 6.0 1.5
0.5 ( lux )
3000K
60 80
15° 0 0.5 1 1.5 2 ( m )
S.4663
FLANGE
for STEP BOLLARD
77 x 58 mm flange to be fixed in concrete with stainless steel screws.
233
450
208

Accent lighting
for window reveals
Shape 238 Nanoled Frame 240
234

Accent lighting
for walls or facades
Blitz 242 Lift 246
235

236

Shape
Surfaced mounted accent lighting
SHAPE creates uniform light on the outer edge of windows producing charming light effects on residential, public, historical and artistic façades. Miniaturization, versatility and high performances are the typical characteristics of this luminaire which is able to illuminate even wide openings with a minimum energy consumption and its high functionality level. The light fitting uses only one LED and its inclination can be easily adjusted according to the different inclinations of window sills keeping in this way its capacity to create attractive light scenes.
Nanoled frame
Recessed mounted accent lighting
Nanoled Frame creates uniform light on the outer edge of windows, niches, openings changing them into striking luminous volumes. Its wide beam of 120° produces charming light effects on residential, public, historical and artistic façades.
Nanoled Frame is a recessed fitting that can be totally integrated into the architecture and it has an extremely reduced size: the projecting part of only 15mm is a small shaped glass cap.
Design K.Begasse
www.simes.it/shape 237

House of Fates – European Education Center, Budapest, Hungary – Cube Design, FBI Studio © ph. Tamás Bujnovszky / Be light Kft.
SHAPE Surfaced mounted accent lighting
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Protective Cover with clip locking system. No visible screws.
Clear policarbonate diffuser.
Luminaire supplied with 1,5m of cable for connection with remote recessed connection box.
Silicone gaskets.
Double powder paint.
The fitting allows an adjustment
of approximately 5° for the perfect alignment of the light beam with the window frame.
Colours:
White (code 01) Aluminium grey (code 14)
Protection class
IP65
Isolation class
CLASS I y SHAPE CLASS III K MINISHAPE
Mechanical resistance
IK 10
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
238

SHAPE
Mini-Shape
S.6425W
1 HIGH-POWER LED 3000K CRI80
Rated input power 1,0W-350mA ÷ 3,6W-1200mA Vf 3,2V max With radial lens 170°x6°
Requires a remote constant current driver Vout 120V DC max (page 470)
S.6425N
170°x6°
1 HIGH-POWER LED 4000K CRI80
71 Rated input power 1,0W-350mA ÷ 3,6W-1200mA Vf 3,2V max
With radial lens 170°x6°
Requires a remote constant current driver Vout 120V DC max (page 470)
mA 350 Watt 1,0 Lumen (3000K) 67 Lumen (4000K) 76
S.6420W
500 700 1000 1200 1,4 2,0 3,0 3,6 92 121 158 179 105 137 180 204
Shape
150
1 HIGH-POWER LED 3000K CRI80 295lm Rated luminaire luminous flux 181lm
Rated input power 4,7W
220V-240V AC 50/60Hz / DC Not Dimmable With radial lens 170°x6°
S.6420N
1 HIGH-POWER LED 4000K CRI80 428lm Rated luminaire luminous flux 211lm
Rated input power 4,7W
220V-240V AC 50/60Hz / DC Not Dimmable With radial lens 170°x6°
170°x6°
239
40 90
37 87

240
NANOLED FRAME Recessed mounted accent lighting
Body made of AISI 316L monoblock stainless steel.
Protruding shaped glass diffuser. Luminaire supplied with 5m of cable for connection with remote recessed connection box.
Absence of screws (the luminaire is fixed to the recessing box through clips). Supplied with recessing box in polypropylene.
Protection class
IP67
Isolation class
CLASS III K Mechanical resistance
IK 06
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
Finishing:
Stainless steel
(code 19)

NANOLED FRAME
Ø 60 mm protrunding diffuser
Ø 60
Ø 50
S.3390W.19
1 HIGH-POWER LED 3000K CRI80 115lm Rated luminaire luminous flux 66lm
S.3390N.19
1 HIGH-POWER LED 4000K CRI80 127lm Rated luminaire luminous flux 73lm
Rated input power 2,2W 24V DC With radial lens 120°x15°
Requires a remote constant voltage driver (page 468-469)
120°x15°
241
80 15

242
Steinspranget Kindergartenr, Nordstrand, Oslo, Norway © Nils Petter Dahle / Fagerhult Belysning AS

Blitz
Wall effect
BLITZ is an extremely versatile lighting system with its countless possible variations. BLITZ allows to create dazzling scenographic lighting effects that can make the most of any environment.
www.simes.it/blitz 243

BLITZ Wall effect Die-cast EN AB-47100 aluminium
Protection class
IP65
Isolation class
CLASS I y
Mechanical resistance of glass
IK 10
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
Simes Headquarter, Corte Franca, Italy © SIMES S.p.a.
S.3554
STAKE in polypropylene.
Colour: black (code 09)
Total length 420 mm
The 90 mm upper part must stay out of the ground level, according with the norms.
244
housing with high corrosion resistance. Reflector in polymers covered with 99.98% pure aluminium.
Toughened glass lenses.
Stainless steel screws.
Luminaire with double cable entry and cable glands.
Silicone gaskets.
Double powder paint.
Colour:
Aluminium grey (code 14)
420

BLITZ
1 Narrow beam
1 Wide beam + 1 Narrow beam
S.4049W
1 COB LED 3000K CRI90 1850lm
Rated luminaire luminous flux 67lm
Rated input power 18,6W
220V-240V AC 50/60Hz / DC Not Dimmable
3000K 37 11 6
3
4
( lux ) 6°
S.4053W
1 COB LED 3000K CRI90 1850lm
Rated luminaire luminous flux 357lm
Rated input power 18,6W
220V-240V AC 50/60Hz / DC Not Dimmable
3000K
0
3000K
0
3000K
0
37
1
58
0.5
37
1
11
2
12
1.0
11
2
6
3
5
1.5
6
3
3
4
5
2.0
3
4
( lux ) 6°
(m )
( lux )
88° (m )
0
1
2
3
(m )
180
180
2 Windows 180° narrow beams
S.4069W
1 COB LED 3000K CRI90 1850lm
Rated luminaire luminous flux 157lm
Rated input power 18,6W
220V-240V AC 50/60Hz / DC Not Dimmable
S.4089W
1 COB LED 3000K CRI90 1850lm
Rated luminaire luminous flux 303lm
Rated input power 18,6W
220V-240V AC 50/60Hz / DC Not Dimmable
( lux ) 6°
(m )
4 Narrow beams
180
3000K
37
11
6
3
( lux ) 6°
0 1 2 3 4
(m )
180
245
Ø 180 Ø 180
Ø 180 Ø 180

246

Lift
Wall effect
Wall effect of a rigorous geometry design, LIFT fits perfectly in different architectural environments personalizing any context in a clear way.
www.simes.it/lift 247

248
LIFT Wall effect
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Reflector in polymers covered with 99.98% pure aluminium.
Clear thoughened glass.
Stainless steel screws.
Luminaire with one single cable entry and grommet (Minilift).
Luminaire with double cable entry and cable glands (Lift).
Silicone gaskets.
Double powder paint.
Protection class
IP65
Isolation class
CLASS II q MINILIFT CLASS I y LIFT
Mechanical resistance of glass
IK 06
Leds 4000K CRI70 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
Colours:
Aluminium grey (code 14)
REGISTERED DESIGN
“Elpidia” children’s hospital, Athens, Greece © Gravani Bros SA

MINILIFT
1 wide beam
S.5077W
1 HIGH-POWER LED 3000K CRI80 170lm Rated luminaire luminous flux 38lm
Rated input power 3,5W
220V-240V AC 50/60Hz / DC Not Dimmable
19 3 1 0 0.5 1 1.5
0.5 ( lux 2 (m )
)
43°
1 narrow beam
120 140
S.5067W
1 HIGH-POWER LED 3000K CRI80 170lm Rated luminaire luminous flux 20lm
Rated input power 3,5W
220V-240V AC 50/60Hz / DC Not Dimmable
26 9 3
0 1 2 3
1.5 ( lux
4 (m )
)

2 wide beams
120 140
S.5027W
2 HIGH-POWER LEDs 3000K CRI80 340lm Rated luminaire luminous flux 76lm
Rated input power 6,5W
220V-240V AC 50/60Hz / DC Not Dimmable
19 3 1 0 0.5 1 1.5
0.5 ( lux 2 (m )
)
1 wide beam + 1 narrow beam
S.5037W
2 HIGH-POWER LEDs 3000K CRI80 340lm
Rated luminaire luminous flux 58lm
Rated input power 6,5W
220V-240V AC 50/60Hz / DC Not Dimmable
26 9 3
0 1 2 3
19 3 1
0 0.5 1 1.5 2 ( m )
43°
120 140
1.5 ( lux
)
)
4 (m ) 0.5 ( lux

43°
120 140
249
120 120 120 120

MINILIFT
2 narrow beams
S.5047W
2 HIGH-POWER LEDs 3000K CRI80 340lm Rated luminaire luminous flux 40lm
Rated input power 6,5W
220V-240V AC 50/60Hz / DC Not Dimmable
26 9 3
1.5 ( lux )

0 1 2 3 4 (m )
4 narrow beams
120 140
S.5087W
4 HIGH-POWER LEDs 3000K CRI80 680lm Rated luminaire luminous flux 80lm
Rated input power 11,4W
220V-240V AC 50/60Hz / DC Not Dimmable
26 9 3
1.5 ( lux )
3° 0 1 2 3 4 (m )
4 wide beams
120 140
S.5097W
4 HIGH-POWER LEDs 3000K CRI80 680lm Rated luminaire luminous flux 152lm
Rated input power 11,4W
220V-240V AC 50/60Hz / DC Not Dimmable
19 3 1
0 0.5 1 1.5 2 ( m )
250
0.5 ( lux )
43°
120 140
120 120 120

251
St. Georges Tower, Leicester, United Kingdom © Concord Lighting by Havells Sylvania

LIFT
1 wide beam
1 narrow beam
S.5070W
1 COB LED 3000K CRI90 1850lm
Rated luminaire luminous flux 202lm
Rated input power 18,2W
220V-240V AC 50/60Hz / DC Not Dimmable
193 17 7
0 0.5 1.0 1.5
(lux)
2.0 (m)
S.5075W
1 COB LED 3000K CRI90 1850lm
Rated luminaire luminous flux 109lm
Rated input power 18,2W
220V-240V AC 50/60Hz / DC Not Dimmable
65 19 12
0 1.0 2.0 3.0
(lux)

4.0 (m)
4
60°
180 205
2 wide beams
180 205
S.5026W
1 COB LED 3000K CRI90 1850lm
Rated luminaire luminous flux 404lm
Rated input power 18,2W
220V-240V AC 50/60Hz / DC Not Dimmable
193 17 7
0 0.5 1.0 1.5
(lux)
60°
2.0 (m)
5
S.5033W
1 COB LED 3000K CRI90 1850lm
Rated luminaire luminous flux 311lm
Rated input power 18,2W
220V-240V AC 50/60Hz / DC Not Dimmable
65 19 12
0 1.0 2.0 3.0
5
(lux)

4
1 wide beam + 1 narrow beam
180 205
252
180 205
193 0 0.5
4.0 (m) 17 7 4 (lux)
1.0 1.5
2.0 (m)
60°
180 180 180 180

LIFT
2 narrow beams
S.5040W
1 COB LED 3000K CRI90 1850lm
Rated luminaire luminous flux 218lm
Rated input power 18,2W
220V-240V AC 50/60Hz / DC Not Dimmable
65 19 12 5
(lux)

0 1.0 2.0 3.0
4.0 (m)
4 narrow beams
180 205
S.5080W
1 COB LED 3000K CRI90 1850lm
Rated luminaire luminous flux 436lm
Rated input power 18,2W
220V-240V AC 50/60Hz / DC Not Dimmable
65 19 12
0 1.0 2.0 3.0
(lux)

4.0 (m)
5
4 wide beams
180 205
S.5090W
1 COB LED 3000K CRI90 1850lm
Rated luminaire luminous flux 808lm
Rated input power 18,2W
220V-240V AC 50/60Hz / DC Not Dimmable
193 17 7
0 0.5 1.0 1.5
(lux)
2.0 (m)
4
253
60°
180 205
180 180 180

254
LIFT RECTANGULAR Wall effect
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Acid-etched toughened glass. Stainless steel screws.
Luminaire with double cable entry and cable glands
Silicone gaskets.
Double powder paint.
Protection class
IP65
Isolation class
CLASS I y
Mechanical resistance of glass
IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
Colours:
Aluminium grey
(code 14)
Municipality of Semily, Czech Republic © Exx s.r.o.

LIFT RECTANGULAR
Minilift 1 wide beam
S.5054W
HIGH-POWER LEDs 3000K CRI90 1015lm Rated luminaire luminous flux 607lm
Rated input power 10,4W
220V-240V AC 50/60Hz / DC Not Dimmable
3000K 160 23
0 0,5 1,0
7 3
1,5 2,0
( lux ) 89°
S.5064W
HIGH-POWER LEDs 3000K CRI90 2030lm Rated luminaire luminous flux 1214lm Rated input power 19,8W
220V-240V AC 50/60Hz / DC Not Dimmable
3000K 160 23
0 0,5 1,0
7 3
1,5 2,0
( lux ) 89°
( m )
Minilift 2 wide beams
265 110
( m )
265 110
255
100 100

326
Single linear effects
Streamline 258 Wall-mounted
Wall mounted
330 338 338
256

Wall mounted Continuous linear effects
Led Tube 262
Continuous Rod 266 Minimal
(Surface mounted or recessed mounted)
Continuous Rod 272 Comfort
(Surface mounted or recessed mounted
257

258

Streamline
Wall mounted
Streamline wall mounted has been designed to illuminate with grazing light walls and facades creating a diffused light effect, thanks to its high luminous flux. The light beam angle can be modelled 0°-5°-10°; this feature makes it very flexible in relation to the different project requirements. Streamline’s thin and compact shape discreetly talks together with the context in which it integrates. Its comfortable optics along with the dimming device complete the features of this exterior luminaire, that ensures high performances and flexibility in terms of applications.
2018
www.simes.it/streamline 259

STREAMLINE Wall mounted
Casa Y, Pino Torinese, Torino, Italy © Arch. Luca Maria Gandini ph. Mario Bertani
0° 5° 10°
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Clear toughened glass diffuser. Luminaire with one single cable entry and grommet.
Luminaire with double cable entry and grommet version available on request with surcharge.
Stainless steel screws.
Silicone gaskets.
Double powder paint.
Colour:
Aluminium grey (code 14)
Protection class
IP65
Isolation class
CLASS I y Mechanical resistance
IK 07
Leds 4000K CRI80 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
Wall mounted
Streamline in the semifixed version allows three different beam settings:
0° – 5° – 10°
260

STREAMLINE Wall mounted Ministreamline Asymmetrical optic
420 44
275
S.1240W
MID-POWER LEDs 3000K CRI80 2880lm
Rated luminaire luminous flux 1806lm Rated input power 20,3W
220V-240V AC 50/60Hz / DC Not Dimmable
h(m) E(lx) 51110 42210
C0 10°+40°
C90 94°
=5°
365 2 22 13 1 199 34
0 1
2 1
4 1
2 0
2 3(m)
Streamline Asymmetrical optic
977 44
760
S.1250W
MID-POWER LEDs 3000K CRI80 7200lm Rated luminaire luminous flux 4274lm Rated input power 59W
220V-240V AC 50/60Hz / DC Not Dimmable
h(m) E(lx) 52211 43321 37742 2 28 18 6 2 1 200 55 5 1
0 1 2 3(m)
C0 10°+40°
C90 94°
=5°
261
95
95

262

Led Tube
Adjustable wall mounted
LED TUBE is an adjustable modular luminaire specifically designed for grazing effects on façades and window frames. It can be cut to size and therefore offer maximum flexibility of application.
263

LED TUBE Adjustable wall mounted
Coextruded polycarbonate diffuser 1,5 mm thick with a 50 μm protective layer against UV rays. Transparent silicone end caps.
Fixing base in extruded anodized
EN AW-6060 aluminium housing with high corrosion resistance.
Stainless steel screws.
Circuit equipped with a through supply system for parallel connection up to a maximum of 5 fittings in line for RGB version and up to a maximun of 10 fittings in line for 230V version.
Colour:
Anodized aluminium (code 13)
Protection class
IP65
Isolation class
CLASS II q CLASS III  RGB
Mechanical resistance
IK 08
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
PATENTED
92 506
S.3408
END CAP WITH SUPPLY CABLE
Only for 230V ( codes S.5905W S.5905N ).
Silicone end cap with piece of cable to supply the following fitting with parallel connection.
S.3409
END CAP WITH SUPPLY CABLE
Only for RGB version ( code S.5902 ). Silicone end cap with piece of cable to supply the following fitting with parallel connection.
S.5901
WALL BRACKET
combined to LED TUBE for wall applications
264

LED TUBE
LED Tube 1000 mm
1000 Ø 44
S.5905W
MID-POWER LEDs 3000K CRI90 1900lm
Rated luminaire luminous flux 1468lm Rated input power 23W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable optic
S.5905N
MID-POWER LEDs 4000K CRI90 2300lm
Rated luminaire luminous flux 1784lm Rated input power 23W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable optic
S.5902
MID-POWER LEDs RGB
Rated input power 16W 24V PWM Adjustable optic
Requires constant voltage remote PWM power supply (page 471)
h(m) E(lx)
2.5 4433 2.0 8754
C0 113° C90 115°
1.5 1.0 0.5
0.12 m
17 15 8 7
54 43 18 6 290 155 23 5
0 0.5 1.0 1.5 (m)
h(m) E(lx)
2.5 5543 2.0 9865
1.5 1.0 0.5
0.12 m
22 18 10 6
66 49 20 8 452 257 24 5
0 0.5 1.0 1.5 (m)
h(m) E(lx)
2.5 0000 2.0 1510 1.5 1321 1.0 7521 0.5 362130
0.12 m
0 0.5 1.0 1.5 (m)
www.simes.it/tubeled 265

266

Continuous
rod
minimal
Continuous Rod Minimal is a linear luminaire made of a performing IP65 rated LED Strip and a thin aluminium profile in which it is embedded. It comes in two versions, surafce and recessed mount and the specific accessories available upon request designed around the standard luminaire significantly widen the applications.
A straight connector allows a continuous installation of Minimal Rod to create uniform light lines at the desired length. The angular acessories can create angles at 90° for single flat surfaces or for two perpendicular flat surfaces. A specific recessed box to house the luminaire enables the installation in brick or cast concrete walls. The light intensity can be modulated with 24V remote dimmable power supplies.
Surface mounted
Recessed mounted
www.simes.it/rodminimal 267

CONTINUOUS ROD MINIMAL
Filmar S.p.A., Zocco di Erbusco, BS, Italy – Arch. Giuliano Venturelli © ph. Mario Bertani
Fixing base in extruded anodized
EN AW-6060 aluminium housing with high corrosion resistance.
Luminaire hard wired with 5m single PVC cable.
Continuous light source made of opal silicone.
Transparent silicone end caps for LED circuit and aluminium EN AW-47100 caps for the extruded parts.
Double powder paint.
Colours:
White
Aluminium grey (code 14)
Protection class
IP65
Isolation class
CLASS III  Mechanical resistance
IK 08
Remote power supply not included.
Continuous Rod Colours
Continuous Rod Minimal Surface or Recessed is available in 4 different light source Colours (Yellow, Red, Blue and Green LEDs colours) on request with surcharge.
The extruded profile of CONTINUOUS ROD MINIMAL SURFACE MOUNT does not allow any through wiring, each luminaire must be wired individually. Hence, the corrugated tube for the supply must be installed at the beginning of the luminaire.
Location of the corrugated tube that allows the supply of one luminaire.
Corrugated tube 1000-3000
Location of the corrugated tube that allows the supply of two luminaires.
1000-3000 Corrugated tube 1000-3000
For the latest technical information and luminaire updates with LED technology please refer to the official website (www.simes.it)
(code 01)
268

CONTINUOUS ROD MINIMAL Surface
Ceiling
Wall
Single luminaire
3000K
S.2301W S.2302W S.2303W
22 29
4000K
S.2301N S.2302N S.2303N
1,0m 2,0m 3,0m
953 / 1953 / 2953
Surface mounted
MID-POWER LEDs 3000K / 4000K CRI80 750lm/3000K 720lm/4000K / 1m
Rated luminaire luminous flux 725lm/3000K / 1m Rated luminaire luminous flux 659lm/4000K / 1m Rated input power 11,5W / 1m 24V DC
Require constant voltage remote power supply (page 468-469)
The light source may be cut every 5cm to achieve the desired length (please refer to the installation instructions).
More lined up luminaires
29
Luminous angles at 90° on two perpendicular surfaces (ceiling/wall or wall/wall) can be achieved as well. Also in this case specific accessories are needed.
S.2306
90° corner coupler accessory for perpendicular surfaces NOT INCLUDED
More luminaires with angles on the same surface
More luminaires with angles on perpendicular surfaces
The standard luminaires listed in the
catalogue can create surface lighting up continuously using the straight
lines of 1m, 2m or 3m.
Standard luminaires may be lined connector delivered with the article.
Staight connector INCLUDED
All surface mounted versions may be connected to create luminous angles at 90° in relation to a single installation plan (wall or ceiling) with the specific accessories.
S.2305
90° corner coupler accessory for single flat surfaces NOT INCLUDED
269
22

CONTINUOUS ROD MINIMAL Recessed (for installation in plasterboard)
Single luminaire
953 / 1953 / 2953 36
More luminaires with angles on perpendicular surfaces
Luminous angles at 90° on two perpendicular surfaces (ceiling/wall or wall/wall) can be achieved as well. Also in this case specific accessories are needed.
S.2326
90° corner coupler accessory for perpendicular surfaces NOT INCLUDED
The standard luminaires listed in the catalogue can create recessed lighting lines of 1m, 2m or 3m.
270
Recessed mounted
More lined up luminaires
Standard luminaires may be lined up continuously using the straight connector delivered with the article.
Staight connector INCLUDED
MID-POWER LEDs 3000K / 4000K CRI80 750lm/3000K 720lm/4000K / 1m
Rated luminaire luminous flux 725lm/3000K / 1m Rated luminaire luminous flux 659lm/4000K / 1m Rated input power 11,5W / 1m 24V DC
Suitable for installation in plasterboard, complete with fixation clips.
Require constant voltage remote power supply (page 468-469)
The light source may be cut every 5cm to achieve the desired length (please refer to the installation instructions).
3000K 4000K
S.2321W S.2321N 1,0m S.2322W S.2322N 2,0m S.2323W S.2323N 3,0m
1÷32
90
36 36
More luminaires with angles on the same surface
All recessed mounted versions may be connected to create luminous angles at 90° in relation to a single installation plan (wall or ceiling) with the specific accessories.
S.2325
90° corner coupler accessory for single flat surfaces NOT INCLUDED

RECESSED HOUSING ACCESSORY (for installation in masonry) Recessed ceiling or wall mount in brickwork
with recessed housing
To correctly install the standard luminaire into brick walls or in masonry ceilings or cast concrete the anodized aluminium recessed housing must used.
Recessed housing accessories S.2327.13 1,0m
S.2328.13 2,0m
3,0m
S.2329.13
60
27
1017 / 2017 / 3017
Single luminaire with recessed housing
Unlike the installation in plasterboard where a light effect of more than
3m is achievable by connecting
the luminaires together, the use
of the recessed housing limits the maximum length to 3m. The standard luminaires are sectionable.
271
74

272

Surface mounted with direct light
Surface mounted with grazing light
Recessed mounted
Continuous rod comfort
Continuous rod comfort has been designed for the illumination of facades, walls, cornices and way finding. The main feature of this luminaire is its high visual comfort.
The special aluminium profile and the recessed positioning of the light source allow the reduction of glare to a minimum.
The recessed version of Continuous rod comfort may be installed in plasterboard ceilings and walls (fixing with clips) or full masonry with the specific recessed housing.
The light intensity can be modulated with 24V remote dimmable power supplies.
www.simes.it/rodcomfort 273

CONTINUOUS ROD COMFORT
Private villa, Italy – Arch. Duilio Damilano © ph. Mario Bertani
Fixing base in extruded anodized
EN AW-6060 aluminium housing with high corrosion resistance.
Luminaire hard wired with 5m single PVC cable.
Continuous light source made of opal silicone.
Transparent silicone end caps for LED circuit and aluminium EN AW-6060 caps for the extruded parts.
Double powder paint.
Colours:
White
Aluminium grey (code 14)
Protection class
IP65
Isolation class
CLASS III  Mechanical resistance
IK 08
Remote power supply not included.
Continuous Rod Colours
Continuous Rod Comfort Surface or Recessed is available in 4 different light source Colours (Yellow, Red, Blue and Green LEDs colours) on request with surcharge.
(code 01)
CONTINUOUS ROD COMFORT SURFACE MOUNT is made up of a light source delivered with 5m of cable and of an extruded profile that allows the placement of the plastic through wiring duct (22mm x 10mm max.) and the passage of the cable inside. Moreover, the supply cable of the luminaire next to it may also be fitted. Hence, according to the location of the corrugated tube, up to 4 luminaires may be powered (the maximum length being 12m).
Location of the corrugated tube that allows the supply of two luminaires Corrugated tube
1000-3000 1000-3000
Location of the corrugated tube that allows the supply of three luminaires Corrugated tube
1000-3000 1000-3000 1000-3000
Location of the corrugated tube that allows the supply of four luminaires Corrugated tube
274
1000-3000 1000-3000 1000-3000 1000-3000

CONTINUOUS ROD COMFORT Surface
Wall Ceiling
Surface mounted with direct light
Wall-washer
Surface mounted with grazing light
MID-POWER LEDs 3000K / 4000K CRI80 750lm/3000K 720lm/4000K / 1m
Rated luminaire luminous flux 725lm/3000K / 1m Rated luminaire luminous flux 659lm/4000K / 1m Rated input power 11,5W / 1m 24V DC
Require constant voltage remote power supply (page 468-469)
The light source may be cut every 5cm to achieve the desired length (please refer to the installation instructions).
3000K
S.2351W S.2352W S.2353W
40 2
4000K
S.2351N S.2352N S.2353N
1,0m 2,0m 3,0m
1000-3000
Single luminaire with direct light
Single luminaire with grazing light
In its surface version CONTINUOUS ROD COMFORT may be installed with the light parallel to the installation surface as to obtain grazing light effects of standard lengths ( 1m, 2m or 3m).
2
The standard luminaires may be lined up even if they are installed with light parallel to the mounting surface. Grazing light effects of the desired length can be achieved by removing the end caps.
More lined up luminaires with direct light
More lined up luminaires with grazing light
Using the standard luminaires listed The standard luminaires may be
in the catalogue surface luminous lines of 1m, 2m or 3m can be achieved with direct light perpen- dicular to the isntallation surface. The recessed installed light source ensures an excellent visual comfort.
lined up between themselves in a continuous mode by removing the end caps.
275
49

CONTINUOUS ROD COMFORT Recessed (for installation in plasterboard)
Ceiling
Wall
3000K
S.2371W S.2372W S.2373W
54
4000K
S.2371N 1,0m S.2372N 2,0m S.2373N 3,0m
11 1000-3000 11
Recessed mounted
MID-POWER LEDs 3000K / 4000K CRI80 750lm/3000K 720lm/4000K / 1m
Rated luminaire luminous flux 725lm/3000K / 1m Rated luminaire luminous flux 659lm/4000K / 1m Rated input power 11,5W / 1m 24V DC
Suitable for installation in plasterboard, complete with fixation clips.
Require constant voltage remote power supply (page 468-469)
The light source may be cut every 5cm to achieve the desired length (please refer to the installation instructions).
Single luminaire with direct light
More lined up luminaires with direct light
Using the standard luminaire listed in the catalogue recessed luminous lines of 1m, 2m or 3 m can be achieved in plasterboard. The recessed installed light source ensures an excellent visual comfort.
The standard luminaires for recessed installation in plasterboard may be lined up between themselves in a continuous mode by removing the end caps.
276
1÷32
88

RECESSED HOUSING ACCESSORY (for installation in masonry) Recessed ceiling or wall mount in brickwork
with recessed housing
To correctly install the standard luminaire into brick walls or in masonry ceilings or cast concrete the anodized aluminium recessed housing must used.
Recessed housing accessories
S.2377.13 1,0m S.2378.13 2,0m S.2379.13 3,0m
75
44
1017 / 2017 / 3017
Single luminaire with recessed housing
Unlike the installation in plasterboard where a light effect of more than
3m is achievable by connecting
the luminaires together, the use
of the recessed housing limits the maximum length to 3m. The standard luminaires are sectionable.
277
74

Wall mounted
Trim
280 Cool 288
254 Zen 324
18 Cool wood 19 applique
Cool square
292 Kube 296
330 Plafoniere 334
Lift rectangular
Vedo
278
Look wood applique
Concrete 8 applique

Appeal 300 Look 304 Plan 312 Loft 318
Smooth 338 Slot 344
279

280

Trim
Applique and bollard
Characterised by square and essential lines, Trim is a structured lighting piece, which is suitable for any type of context, whether classic or modern. It creates a charming atmosphere for the surrounding space. As a result of the union between aluminum and glass, Trim is an extremely versatile solution and can be wall mounted or installed as a bollard to provide continuity of design.
www.simes.it/trim 281

282
TRIM Applique and bollard single emission
Die-cast EN AB-47100 aluminium housing, extruded EN AW-6060 aluminium structure (bollard version) with high corrosion resistance. Toughened glass diffuser 4mm thick. Stainless steel screws.
Luminaire supplied with 1m of cable. Silicone gaskets.
Double powder paint.
Colours:
White
Aluminium grey (code 14)
Protection class
IP54
Isolation class
CLASS I y
Mechanical resistance
IK 06 TRIM HORIZONTAL / BOLLARDS IK 09
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
S.3159
FLANGE FOR TRIM BOLLARD
Steel flange with stainless steel screws (to be buried in concrete).
(code 01)

TRIM SQUARE Single emission Trim square 170
Trim square 240
170
100
170
100
240
100
240
100
240
24
65
S.3150W
MID-POWER LEDs 3000K CRI90 900lm Rated luminaire luminous flux 603lm Rated input power 9W
220V-230V AC 50/60Hz Not Dimmable Computer-simulated photometrics
S.3151W
MID-POWER LEDs 3000K CRI90 900lm Rated luminaire luminous flux 622lm Rated input power 9W
220V-230V AC 50/60Hz Not Dimmable Computer-simulated photometrics
S.3155W
MID-POWER LEDs 3000K CRI90 1800lm Rated luminaire luminous flux 1265lm Rated input power 18W
220V-230V AC 50/60Hz Not Dimmable Computer-simulated photometrics
S.3156W
MID-POWER LEDs 3000K CRI90 1800lm Rated luminaire luminous flux 1280lm Rated input power 18W
220V-230V AC 50/60Hz Not Dimmable Computer-simulated photometrics
Trim square 170 bollard
170
24
24
65
24
Trim square 240 bollard
240
24
24
283
580 240 170 240 170

TRIM RECTANGULAR Single emission
Trim horizontal
Trim rectangular
Trim rectangular bollard
300 100
70 140
300
100
24
24
S.3170W
MID-POWER LEDs 3000K CRI90 1800lm Rated luminaire luminous flux 1290lm Rated input power 18W
220V-230V AC 50/60Hz Not Dimmable Computer-simulated photometrics
S.3171W
MID-POWER LEDs 3000K CRI90 1800lm Rated luminaire luminous flux 1270lm Rated input power 18W
220V-230V AC 50/60Hz Not Dimmable Computer-simulated photometrics
S.3172W
MID-POWER LEDs 3000K CRI90 1800lm Rated luminaire luminous flux 1290lm Rated input power 18W
220V-230V AC 50/60Hz Not Dimmable Computer-simulated photometrics
300
300
140
65
24
284
24
140
140 140
580

285

286

Cool
Applique and bollard
COOL is one of the latest LED luminaires from SIMES, engineered to maximize the LED power, whilst minimizing the size and energy consumption. COOL is a simple void volume diffusing light in two directions from a very thin LED circuit right below its protective glass. Available in different versions, as wall mounted and as bollard, COOL family introduces a new way to light up outdoor spaces.
The Cool Square range and the Kube range come from this successful concept. “Solid state and voids of light” proposed in many variations, different in size, thickness and application possibilities.
Kube
Applique and bollard
www.simes.it/cool 287

COOL Applique and bollard
Private house, Sulzano, (Brescia), Italy © ph. Mario Bertani
S.7249
FLANGE FOR MINICOOL BOLLARD 220 mm S.7236W and S.7241W
Steel flange with stainless steel screws
(to be buried in concrete).
S.7269
FLANGE FOR COOL BOLLARD 290 mm S.7245W and S.7246W
Steel flange with stainless steel screws (to be buried in concrete).
S.5506
4 way connector for through wiring (in/out).
To install inside the bollard.
Die-cast EN AB-47100 aluminium housing, extruded EN AW-6060 aluminium structure (bollard version) with high corrosion resistance. Toughened glass diffuser.
Stainless steel screws.
Luminaire supplied with 1m of cable (Minicool L 220mm).
Luminaire with one single cable entry and grommet (Cool L 290mm Applique).
Pre-wired luminaire with neoprene cable and connector (Cool L 290mm Bollard).
Silicone gaskets.
Double powder paint.
Protection class
IP54
Isolation class
CLASS II q MINICOOL L 220 mm CLASS I y COOL L 290 mm
Mechanical resistance
IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
288
Colours:
White Aluminium grey
(code 01) (code 14)

MINICOOL 220 mm Minicool Applique 220 mm
Minicool Bollard H 220 mm
Minicool Bollard H 580 mm
S.7231W
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 562lm
Rated input power 12,5W
220V-230V AC 50/60Hz / DC Not Dimmable
90
33
lux
220
33
S.7236W
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 562lm
Rated input power 12,5W
220V-230V AC 50/60Hz / DC Not Dimmable
lux
S.7241W
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 562lm
Rated input power 12,5W
220V-230V AC 50/60Hz / DC Not Dimmable
220
33
lux
289
580
220
220

COOL 290 mm Cool Applique 290 mm
Cool Bollard H 290 mm
S.7270W
MID-POWER LEDs 3000K CRI90 1860lm Rated luminaire luminous flux 963lm
Rated input power 19W
220V-240V AC 50/60Hz / DC Not Dimmable
105
43
290
S.7245W
MID-POWER LEDs 3000K CRI90 1860lm Rated luminaire luminous flux 963lm
Rated input power 19W
220V-240V AC 50/60Hz / DC Not Dimmable
43
Cool Bollard H 580 mm
290
S.7246W
MID-POWER LEDs 3000K CRI90 1860lm Rated luminaire luminous flux 963lm
Rated input power 19W
220V-240V AC 50/60Hz / DC Not Dimmable
43
290
lux
lux
580 290
290

291
Private villa, Arch. Studio Finotti, Torri del Benaco, Italy © Ph.Mario Bertani

COOL SQUARE
Die-cast EN AB-47100 aluminium housing, extruded EN AW-6060 aluminium structure (bollard version) with high corrosion resistance. Toughened glass diffuser.
Stainless steel screws.
Luminaire supplied with 1,5m of cable (Microcool Square).
Luminaire with one single cable entry and grommet (Minicool and Cool Square).
Pre-wired luminaire with neoprene cable and connector (Bollards). Silicone gaskets.
Double powder paint.
Colours (applique and Long):
White (code 01) Aluminium grey (code 14)
Colour (bollard):
Aluminium grey (code 14)
MAINA Headquarter Arch. Gianni Arnaudo, Fossano, Cuneo, Italy © Ph.Mario Bertani
Cool wall can be installed directly on the floor without flange
S.7284
FLANGE FOR MICROCOOL
SQUARE BOLLARD S.7287W
Steel flange with stainless steel screws (to be buried in concrete).
S.7288
FLANGE FOR MINICOOL
SQUARE BOLLARD S.7286W
Steel flange with stainless steel screws (to be buried in concrete).
S.7289
FLANGE FOR COOL
SQUARE BOLLARD S.7285W, S.7290W, S.7295W
Steel flange with stainless steel screws (to be buried in concrete).
S.5506
4 way connector for through wiring (in/out).
To install inside the bollard.
Applique and bollard
Protection class
IP54
Isolation class
CLASS I y Mechanical resistance
IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
292

MICROCOOL SQUARE 95 mm Microcool square applique
Microcool square bollard H 290 mm
95 45
S.7282W
MID-POWER LEDs 3000K CRI90 545lm Rated luminaire luminous flux 204lm
Rated input power 7W
220V-230V AC 50/60Hz / DC Not Dimmable
S.7287W
MID-POWER LEDs 3000K CRI90 545lm Rated luminaire luminous flux 204lm
Rated input power 7W
220V-230V AC 50/60Hz / DC Not Dimmable
lux
MINICOOL SQUARE 150 mm Minicool square applique
95 45
Minicool square bollard H 450 mm
150 65
S.7281W
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 483lm
Rated input power 12,5W
220V-230V AC 50/60Hz / DC Not Dimmable
S.7286W
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 483lm
Rated input power 12,5W
220V-230V AC 50/60Hz / DC Not Dimmable
lux
150 65
293
450 150
105
290

COOL SQUARE 220 mm Cool square applique
Cool square bollard H 580 mm
Cool square long bollard H 1160 mm
Cool square long H 580 mm
S.7295W S.7290W
220
85
S.7280W
MID-POWER LEDs 3000K CRI90 2180lm Rated luminaire luminous flux 1133lm Rated input power 23,4W
220V-240V AC 50/60Hz / DC Not Dimmable
S.7285W
MID-POWER LEDs 3000K CRI90 2180lm Rated luminaire luminous flux 1133lm Rated input power 23,4W
220V-240V AC 50/60Hz / DC Not Dimmable
220
85
S.7295W H 1160 mm MID-POWER LEDs 3000K CRI90 2180lm
Rated luminaire luminous flux 1273lm Rated input power 23,4W
220V-240V AC 50/60Hz / DC Not Dimmable
S.7290W H 580 mm
MID-POWER LEDs 3000K CRI90 2180lm Rated luminaire luminous flux 1273lm Rated input power 23,4W
220V-240V AC 50/60Hz / DC Not Dimmable
220
85
220 85
294
lux
580
1160
580 220

295
Private villa, Arch. Studio Finotti, Torri del Benaco, Italy © Ph.Mario Bertani

KUBE Applique and bollard
Die-cast EN AB-47100 aluminium, extruded EN AW-6060 aluminium structure (bollard version) with
high corrosion resistance.
Toughened glass diffuser 4mm thick. Stainless steel screws.
Luminaire with one single cable entry and grommet (Microkube, Microkube Long).
Luminaire with double cable entry and grommet (Kube, Kube Long). Pre-wired luminaire with neoprene cable and connector (Microkube Long Bollard, Kube Long Bollard).
Silicone gaskets.
Double powder paint.
Colours
White
Aluminium grey (code 14)
Colour versions Bollard / Long
Aluminium grey (code 14)
Protection class
IP54
Isolation class
CLASS I y
Mechanical resistance of glass
IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
Ø 120
Ø 240
S.1014
STAKE FOR MICROKUBE
in polypropylene for temporary applications
S.3554
STAKE FOR KUBE
in polypropylene for temporary applications
S.6309
FLANGE ACCESSORY FOR MICROKUBE
Ø 120 mm flange to be buried in concrete with stainless steel screws for fixing in the ground.
S.5350
FLANGE ACCESSORY FOR
KUBE
Ø 240 mm flange to be buried in concrete with stainless steel screws for fixing in the ground.
S.5506
4 way connector for through wiring (in/out).
To install inside the LONG BOLLARD.
(code 01)
296
420
270

MICROKUBE 120 mm
Microkube
Microkube long H 450 mm
120 120
S.6300W
MID-POWER LEDs 3000K CRI90 970lm Rated luminaire luminous flux 264lm
Rated input power 13W
220V-240V AC 50/60Hz / DC Not Dimmable
S.6306W
MID-POWER LEDs 3000K CRI90 970lm Rated luminaire luminous flux 390lm
Rated input power 13W
220V-240V AC 50/60Hz / DC Not Dimmable
120 120
Microkube long bollard H 900 mm
S.6307W
MID-POWER LEDs 3000K CRI90 970lm Rated luminaire luminous flux 390lm
Rated input power 13W
220V-240V AC 50/60Hz / DC Not Dimmable
120 120
297
900 450 120

KUBE 240 mm Kube
Kube long H 580 mm
Kube long bollard H 1350 mm
S.6340W
MID-POWER LEDs 3000K CRI90 3880lm Rated luminaire luminous flux 1099lm Rated input power 45W
220V-240V AC 50/60Hz / DC Not Dimmable
240 240
S.6346W
MID-POWER LEDs 3000K CRI90 3880lm Rated luminaire luminous flux 1425lm Rated input power 45W
220V-240V AC 50/60Hz / DC Not Dimmable
240 240
240 240
S.6347W
MID-POWER LEDs 3000K CRI90 3880lm Rated luminaire luminous flux 1425lm Rated input power 45W
220V-240V AC 50/60Hz / DC Not Dimmable
298
1350 580 240

299

300

Appeal
Applique
Wall applique or pathway light? Both. This is APPEAL, a bi-emission luminaire for external use which creates indirect light all-around or an asymmetrical distribution. A dedicated spring locking system allows the front cover to be mounted in central or decentralized position to choose the most suitable and favorite light distribution. LED source is hidden by a polycarbonate anti-UV diffuser and thanks to this we can obtain a total absence of glare and a visible comfort that matches perfectly the minimal aesthetical design.
www.simes.it/appeal 301

302
APPEAL Applique
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Stainless steel screws.
Clear polycarbonate UV stop diffuser. Luminaire supplied with 2m of cable. Silicone gaskets.
Double powder paint.
Colours:
White
Aluminium grey (code 14)
Protection class
IP54
Isolation class
CLASS II q Mechanical resistance
IK 08
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
Appeal has a clip locking system that allows a symmetrical or asymmetrical front cover securing. No visible fixing screw.
(code 01)

APPEAL
Symmetrical fixing.
Asymmetrical fixing 1.
Asymmetrical fixing 2.
310 30
S.6400W
MID-POWER LEDs 3000K CRI80 1050lm Rated luminaire luminous flux 479lm
Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable
The pin is set in a central position to the cover. The light is evenly distributed on all sides.
The pin is fixed in a decentralized position with the shorter part facing upwards. The light is more distributed upwards.
The pin is fixed in a decentralized position with the shorter part facing down. The light is distributed more downward.
303
65

304

Look
Applique and bollard
LOOK is one of the latest LED luminaires from SIMES, engineered to maximize the LED power, whilst minimizing the size and energy consumption. Available in different versions, as wall mounted and as bollard, LOOK family introduces a new way to light up outdoor spaces. Confirming the SIMES high quality standards, these fittings are made using aluminum with low content of copper and highly robust glass. LOOK has an elegant rectangular body, minimal and compact, mounted on wall or on its bollard. The light is directed on one side through a glass window.
2015
www.simes.it/look 305

LOOK Applique and bollard
Private Villa, Sulzano (Brescia) Italy © Mario Bertani
S.7219
FLANGE FOR MICROLOOK BOLLARD 125 mm Steel flange with stainless steel screws
(to be buried in concrete) S.7212W and S.7213W.
S.7249
FLANGE FOR MINILOOK BOLLARD 220 mm Steel flange with stainless steel screws
(to be buried in concrete) S.7206W, S.7215W, S.7211W and S.7220W.
S.7269
FLANGE FOR LOOK BOLLARD 290 mm Steel flange with stainless steel screws (to be buried in concrete) S.7260W, S.7265W, S.7261W, S.7266W, S.7262W and S.7267W.
S.5506
4 way connector for through wiring (in/out).
To install inside the bollard.
Die-cast EN AB-47100 aluminium housing, extruded EN AW-6060 aluminium structure (bollard version) with high corrosion resistance. Toughened glass diffuser.
Stainless steel screws.
Luminaire supplied with 1m of cable (Minilook L 220mm).
Luminaire with one single cable
entry and grommet (Look L 290mm Applique).
Pre-wired luminaire with neoprene cable and connector (Bollard).
Silicone gaskets.
Double powder paint.
Colours:
White
Aluminium grey (code 14) Burnished bronze (code 20)
Protection class
IP65
Isolation class
CLASS II q
CLASS I y MICROLOOK and LOOK 290mm (Applique)
Mechanical resistance
IK 06 Minilook 220mm and Look Bollard 290mm
IK 04 Look 290mm
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
306
(code 01)

MINILOOK Applique 220 mm Minilook applique 220 mm
Minilook applique 220 mm
LOOK Applique 290 mm Look applique 290 mm
Look applique 290 mm
220 33
S.7201W Single emission
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 475lm
Rated input power 12,5W
220V-240V AC 50/60Hz / DC Not Dimmable
S.7202W Double emission
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 389lm
Rated input power 12,5W
220V-240V AC 50/60Hz / DC Not Dimmable
lux
220 33
lux
290 43
S.7250W Single emission
MID-POWER LEDs 3000K CRI90 1860lm Rated luminaire luminous flux 888lm
Rated input power 19W
220V-240V AC 50/60Hz / DC Not Dimmable
S.7252W Double emission
MID-POWER LEDs 3000K CRI90 1860lm Rated luminaire luminous flux 723lm
Rated input power 19W
220V-240V AC 50/60Hz / DC Not Dimmable
lux
290 43
lux
307
105 105
80 80

MICROLOOK Bollard 125 mm Microlook bollard H 220 mm
Microlook bollard H 450 mm
125 66
125 66
S.7212W Single emission
MID-POWER LEDs 3000K CRI80 800lm Rated luminaire luminous flux 244lm Rated input power 4,2W
220V-240V AC 50/60Hz / DC Not Dimmable
S.7213W Single emission
MID-POWER LEDs 3000K CRI80 800lm Rated luminaire luminous flux 244lm Rated input power 4,2W
220V-240V AC 50/60Hz / DC Not Dimmable
lux
MINILOOK Bollard 220 mm Minilook bollard H 220 mm
220
66 98
S.7206W Single emission
MID-POWER LEDs 3000K CRI90 970lm Rated luminaire luminous flux 334lm Rated input power 12,5W
220V-240V AC 50/60Hz / DC Not Dimmable
S.7215W
Double emission
Minilook bollard H 580 mm
MID-POWER LEDs 3000K CRI90 1940lm Rated luminaire luminous flux 646lm Rated input power 21,5W
220V-240V AC 50/60Hz / DC Not Dimmable
S.7211W Single emission
MID-POWER LEDs 3000K CRI90 970lm Rated luminaire luminous flux 334lm Rated input power 12,5W
220V-240V AC 50/60Hz / DC Not Dimmable
S.7220W Double emission
MID-POWER LEDs 3000K CRI90 1940lm Rated luminaire luminous flux 646lm Rated input power 21,5W
220V-240V AC 50/60Hz / DC Not Dimmable
220
66 98
308
lux
lux
lux
lux
lux
580
220
33
33
450
220
33
33

LOOK Bollard 290 mm Look bollard H 290 mm
S.7260W
Single emission
290 85 130
MID-POWER LEDs 3000K CRI90 1860lm Rated luminaire luminous flux 937lm
Rated input power 24W
220V-240V AC 50/60Hz / DC Not Dimmable
S.7265W Double emission
MID-POWER LEDs 3000K CRI90 3720lm Rated luminaire luminous flux 1858lm Rated input power 48W
220V-240V AC 50/60Hz / DC Not Dimmable
S.7261W Single emission
MID-POWER LEDs 3000K CRI90 1860lm Rated luminaire luminous flux 937lm
Rated input power 24W
220V-240V AC 50/60Hz / DC Not Dimmable
S.7266W Double emission
MID-POWER LEDs 3000K CRI90 3720lm Rated luminaire luminous flux 1858lm Rated input power 48W
220V-240V AC 50/60Hz / DC Not Dimmable
S.7262W Single emission
MID-POWER LEDs 3000K CRI90 1860lm Rated luminaire luminous flux 937lm
Rated input power 24W
220V-240V AC 50/60Hz / DC Not Dimmable
S.7267W Double emission
MID-POWER LEDs 3000K CRI90 3720lm Rated luminaire luminous flux 1858lm Rated input power 48W
220V-240V AC 50/60Hz / DC Not Dimmable
lux
Look bollard H 580 mm
lux
lux
290 85 130
Look bollard H 870 mm
lux
290 85 130
309
870
580
290
43 43 43

310

311
Uniqum Advocaten, Kortrijk, Belgium – Klarté architecten © Annick Vernimmen

312

Plan
Applique protruding glass
Characterized by its formal design, its simplicity and elegant but firm lighting effect, PLAN is a brand new LED appliqué with single or double light emission. The specific finish of the frosted glass confers a strong lighting impact with a more diffused effect giving the fixture a unique character for outdoor applications.
www.simes.it/plan 313

PLAN Applique protruding glass
Die-cast EN AB-47100 and extruded EN AW-6060 aluminium housing with high corrosion resistance.
Toughened acid-etched decorative glass diffuser.
Stainless steel screws.
Pre-wired luminaire with 1m of neoprene cable (Miniplan Horizontal). Luminaire with one single cable entry and grommet (Plan Horizontal). Pre-wired luminaire with 1,5m of neoprene cable (Plan Vertical). Silicone gaskets.
Double powder paint.
Colours:
White
Aluminium grey (code 14) Burnished bronze (code 20)
Protection class
IP65
Isolation class
CLASS II q
CLASS I y Plan Horizontal
Mechanical resistance
IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
314
(code 01)

MINIPLAN HORIZONTAL protruding glass Horizontal single emission
220 80
38
S.3883W
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 475lm
Rated input power 12,5W
220V-240V AC 50/60Hz / DC Not Dimmable
S.3884W
MID-POWER LEDs 3000K CRI90 1090lm Rated luminaire luminous flux 389lm
Rated input power 12,5W
220V-240V AC 50/60Hz / DC Not Dimmable
lux
Horizontal double emission
220 80
43
lux
PLAN HORIZONTAL protruding glass Horizontal single emission
lux
Horizontal double emission
S.3893W
MID-POWER LEDs 3000K CRI90 1860lm Rated luminaire luminous flux 888lm
Rated input power 19W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
290 105
50
S.3894W
MID-POWER LEDs 3000K CRI90 1860lm Rated luminaire luminous flux 723lm
Rated input power 19W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
290 105
57
lux
315

PLAN VERTICAL protruding glass Vertical 60 single emission
Vertical 90 single emission
60 50
S.3875W
MID-POWER LEDs 3000K CRI90 235lm
Rated luminaire luminous flux 75lm
Rated input power 4W
220V-240V AC 50/60Hz / DC Not Dimmable
72
78°
h(m) Ø(m) E(lx)
S.3885W
MID-POWER LEDs 3000K CRI90 710lm
Rated luminaire luminous flux 248lm
Rated input power 10W
220V-240V AC 50/60Hz / DC Not Dimmable
83°
h(m) Ø(m) E(lx)
0.5 1.0 1.5 2.0 2.5 3.0
0.81 171 1.63 43 2.44 19 3.25 11 4.06 7 4.88 5
Vertical 140 single emission
90 50
72
S.3895W
MID-POWER LEDs 3000K CRI90 1180lm
Rated luminaire luminous flux 475lm
Rated input power 16W
220V-240V AC 50/60Hz / DC Not Dimmable
87°
h(m) Ø(m) E(lx)
0.5 0.95 891 1.0 1.89 223 1.5 2.84 99 2.0 3.78 56 2.5 4.73 36 3.0 5.69 25
0.5 1.0 1.5 2.0 2.5 3.0
0.89 498 1.78 124 2.66 55 3.55 31 4.44 20 5.33 14
316
140 50
72
206
206
206

PLAN VERTICAL protruding glass Vertical 60 double emission
Vertical 90 double emission
S.3877W
MID-POWER LEDs 3000K CRI90 470lm
Rated luminaire luminous flux 150lm
Rated input power 6W
220V-240V AC 50/60Hz / DC Not Dimmable
78°
h(m) Ø(m) E(lx)
60 50
72
S.3887W
MID-POWER LEDs 3000K CRI90 1420lm
Rated luminaire luminous flux 496lm
Rated input power 18,2W
220V-240V AC 50/60Hz / DC Not Dimmable
83°
h(m) Ø(m) E(lx)
0.5 1.0 1.5 2.0 2.5 3.0
0.81 171 1.63 43 2.44 19 3.25 11 4.06 7 4.88 5
Vertical 140 double emission
90 50
72
S.3897W
MID-POWER LEDs 3000K CRI90 2360lm
Rated luminaire luminous flux 950lm
Rated input power 29,7W
220V-240V AC 50/60Hz / DC Not Dimmable
72
87°
h(m) Ø(m) E(lx)
0.5 0.95 891 1.0 1.89 223 1.5 2.84 99 2.0 3.78 56 2.5 4.73 36 3.0 5.69 25
0.5 1.0 1.5 2.0 2.5 3.0
0.89 498 1.78 124 2.66 55 3.55 31 4.44 20 5.33 14
140 50
317
212 212 212

318
Galleria Arte Moderna, Pordenone, Italy © ph. Elio e Stefano Ciol

Loft
Wall and ceiling effect
The continuous process in the search of clean cut lines and pure shapes, together with the use of materials that can enhance such essential design characteristics has resulted in the development of LOFT. A complete set of fittings available in three sizes allowing for diverse applications.
www.simes.it/loft 319

LOFT Wall and ceiling effect
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Stainless steel screws.
Clear toughened glass diffuser. Pre-wired luminaire with 0,6m of neoprene cable (Microloft).
Luminaire with one single cable entry and grommet (Loft and Miniloft). Silicone gaskets.
Double powder paint.
Protection class
IP65
Isolation class
CLASS I y
CLASS II q MICROLOFT
Mechanical resistance of diffusor
IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
S.6605
EXTENSIVE BEAM LENS for LOFT SQUARE
S.6630
EXTENSIVE BEAM LENS for LOFT ROUND
320
Colours:
White
Aluminium grey (code .14)
(code .01)

LOFT ROUND Wall mounted Microloft wall round
Ø 60
Miniloft wall round
S.6622W
1 HIGH-POWER LED 3000K CRI90 105lm Rated luminaire luminous flux 74lm
Rated input power 2,2W
220V-240V AC 50/60Hz Not Dimmable Led position fixed
Beam lenses available on request with no surcharge: 9°, 22° and 38°
S.6658W
4 HIGH-POWER LEDs 3000K CRI90 566lm Rated luminaire luminous flux 436lm
Rated input power 8W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
S.6628W
4 HIGH-POWER LEDs 3000K CRI90 566lm Rated luminaire luminous flux 396lm
Rated input power 8W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
Beam lenses available on request with no surcharge: 63°, 10°x44°
S.6689W
9 HIGH-POWER LEDs 3000K CRI90 1542lm Rated luminaire luminous flux 1108lm
Rated input power 18,5W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
S.6680W
9 HIGH-POWER LEDs 3000K CRI90 1542lm Rated luminaire luminous flux 1089lm
Rated input power 18,5W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
Beam lenses available on request with no surcharge: 63°, 10°x44°
7°x28° 3000K h(m) Ø(m) E(lx)
1 0.13+0.49 604 2 0.26+0.99 151 3 0.39+1.48 67 4 0.52+1.98 38 5 0.65+2.47 24
7°x28°
12°
34°
Ø 110
Loft wall round
12° 3000K h(m) Ø(m) E(lx)
1 0.22 6535 2 0.43 1634 3 0.65 726 4 0.87 408 5 1.09 261
34° 3000K h(m) Ø(m) E(lx)
1 0.60 1108 2 1.21 277 3 1.81 123 4 2.42 69 5 3.02 44
12° 3000K h(m) Ø(m) E(lx)
2 0.43 4145 4 0.87 1036 6 1.30 461 8 1.74 259 10 2.17 166
34° 3000K h(m) Ø(m) E(lx)
2 1.21 761 4 2.42 190 6 3.62 85 8 4.83 48 10 6.04 30
12°
34°
Ø 155
321
130 155
95 110
50 60

LOFT SQUARE Wall mounted Microloft wall square
60
S.6625W
1 HIGH-POWER LED 3000K CRI90 105lm
Rated luminaire luminous flux 74lm Rated input power 2,2W
220V-240V AC 50/60Hz Not Dimmable Led position fixed
h(m)
1 2 3 4 5
7°x28° 3000K Ø(m) E(lx)
0.13+0.49 604 0.26+0.99 151 0.39+1.48 67 0.52+1.98 38 0.65+2.47 24
7°x28°
Beam lenses available on request with no surcharge: 60 9°, 22° and 38°
Miniloft wall square
110
110
Loft wall square
S.6655W
4 HIGH-POWER LEDs 3000K CRI90 566lm Rated luminaire luminous flux 436lm
Rated input power 8W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
S.6618W
4 HIGH-POWER LEDs 3000K CRI90 566lm Rated luminaire luminous flux 396lm
Rated input power 8W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
Beam lenses available on request with no surcharge: 63°, 10°x44°
S.6695W
9 HIGH-POWER LEDs 3000K CRI90 1542lm
Rated luminaire luminous flux 1108lm Rated input power 18,5W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
S.6678W
9 HIGH-POWER LEDs 3000K CRI90 1542lm
12° 3000K h(m) Ø(m) E(lx)
12°
1 2 3 4 5
0.22 6535 0.43 1634 0.65 726 0.87 408 1.09 261
34° 3000K h(m) Ø(m) E(lx)
34°
1 2 3 4 5
0.60 1108 1.21 277 1.81 123 2.42 69 3.02 44
12° 3000K h(m) Ø(m) E(lx)
12°
34°
322
Rated luminaire luminous flux 1089lm 155 Rated input power 18,5W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
155 Beam lenses available on request with no surcharge: 63°, 10°x44°
34° 3000K h(m) Ø(m) E(lx)
2 1.21 761 4 2.42 190 6 3.62 85 8 4.83 48 10 6.04 30
2 4 6 8 10
0.43 4145 0.87 1036 1.30 461 1.74 259 2.17 166
155 155 110 110
60 60

LOFT SQUARE Ceiling mounted Microloft ceiling square
60
60
Miniloft ceiling square
110
110
Loft ceiling square
S.6615W
1 HIGH-POWER LED 3000K CRI90 105lm
Rated luminaire luminous flux 91lm Rated input power 2,2W
220V-240V AC 50/60Hz Not Dimmable Adjustable ±15° optic
Beam lenses available on request with no surcharge: 9°, 22°
S.6646W
4 HIGH-POWER LEDs 3000K CRI90 566lm
Rated luminaire luminous flux 396lm
Rated input power 8W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
Beam lenses available on request with no surcharge: 12°, 63° and 10°x44°
38° 3000K h(m) Ø(m) E(lx)
38°
1 2 3 4 5
0.69 191 1.39 48 2.08 21 2.77 12 3.46 8
34° 3000K h(m) Ø(m) E(lx)
34°
1 2 3 4 5
0.60 1108 1.21 277 1.81 123 2.42 69 3.02 44
S.6675W
9 HIGH-POWER LEDs 3000K CRI90 1542lm Rated luminaire luminous flux 1089lm
Rated input power 18,5W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
Beam lenses available on request with no surcharge: 12°, 63° and 10°x44°
34° 3000K h(m) Ø(m) E(lx)
2 1.21 761 4 2.42 190 6 3.62 85 8 4.83 48 10 6.04 30
34°
155
155
323
155 155
110 110
60 60

324

Zen
Ceiling and wall bulkhead
Elegant and minimal, with clean design and small size, ZEN has a technological core with LED sources perfectly distribuited.
The IP65 protection and the possibility to integrate protecting grids, lets ZEN become part of any architectural scheme both external and internal.
www.simes.it/zen 325

326
ZEN Ceiling and wall bulkhead
Die cast EN AB-47100 aluminium housing with high corrosion resistance. Fixing base with heat dissipation system.
Acid-etched glass diffuser 5mm thick, white painted internally.
Stainless steel screws.
Luminaire with double cable entry and grommet (Luminaire suitable for double grommets).
Silicone gaskets.
Zen Round 320 and Square 300 supplied with emergency inverter and battery to supply 1 hour emergency lighting in the case of a mains failure. Double powder paint.
Colours:
(code 01) Aluminium grey (code 14)
Protection class
IP65
Isolation class
CLASS I y
Mechanical resistance
IK 06
(IK 09 on request only for ROUND VERSION 240)
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
ZEN ROUND 320mm and SQUARE 300mm
is available in 1 hour emergency version (3 hour emergency version available on request).
Complies with CEI EN 60598-2-22.
Casa Y, Pino Torinese, Torino, Italy © Arch. Luca Maria Gandini ph. Mario Bertani
White

ZEN ROUND
Round
Round 320 mm
Ø 240 70
Ø 320
84
S.6950W
S.6980W
MID-POWER LEDs 3000K CRI90 1950lm Rated luminaire luminous flux 1086lm Rated input power 22W
220V-240V AC 50/60Hz / DC Not Dimmable
S.6981W
Emergency version
Complies with CEI EN 60598-2-22 MID-POWER LEDs 3000K CRI90 1950lm Rated luminaire luminous flux 1086lm Rated input power 22W
220V-240V AC 50/60Hz / DC Not Dimmable
Round 320 mm with grill
S.6985W
MID-POWER LEDs 3000K CRI90 1950lm Rated luminaire luminous flux 984lm
Rated input power 22W
220V-240V AC 50/60Hz / DC Not Dimmable
S.6986W
Emergency version
Complies with CEI EN 60598-2-22 MID-POWER LEDs 3000K CRI90 1950lm Rated luminaire luminous flux 984lm
Rated input power 22W
220V-240V AC 50/60Hz / DC Not Dimmable
MID-POWER LEDs 3000K CRI90 1089lm Rated luminaire luminous flux 538lm
Rated input power 10,5W
220V-240V AC 50/60Hz / DC Not Dimmable
Round with grill
Ø 240 88
Ø 320
100
S.6955W
MID-POWER LEDs 3000K CRI90 1089lm Rated luminaire luminous flux 428lm
Rated input power 10,5W
220V-240V AC 50/60Hz / DC Not Dimmable
327

ZEN SQUARE
328
S.6960W
S.6990W
MID-POWER LEDs 3000K CRI90 1950lm Rated luminaire luminous flux 1086lm Rated input power 22W
220V-240V AC 50/60Hz / DC Not Dimmable
S.6991W
Emergency version
Complies with CEI EN 60598-2-22 MID-POWER LEDs 3000K CRI90 1950lm Rated luminaire luminous flux 1086lm Rated input power 22W
220V-240V AC 50/60Hz / DC Not Dimmable
Square 300 mm with grill
S.6965W
S.6995W
MID-POWER LEDs 3000K CRI90 1950lm Rated luminaire luminous flux 984lm
Rated input power 22W
220V-240V AC 50/60Hz / DC Not Dimmable
S.6996W
Emergency version
Complies with CEI EN 60598-2-22 MID-POWER LEDs 3000K CRI90 1950lm Rated luminaire luminous flux 984lm
Rated input power 22W
220V-240V AC 50/60Hz / DC Not Dimmable
Square
Square 300 mm
MID-POWER LEDs 3000K CRI90 1089lm Rated luminaire luminous flux 497lm
Rated input power 10,3W
220V-240V AC 50/60Hz / DC Not Dimmable
Square with grill
MID-POWER LEDs 3000K CRI90 1089lm Rated luminaire luminous flux 446lm
Rated input power 10,3W
220V-240V AC 50/60Hz / DC Not Dimmable
220
70
300 75
220
88
300
93
220
300
300
220

329

330

Vedo
Ceiling and wall bulkhead
The classic bulkhead VEDO, made with aluminium, stainless-steel and glass, is appreciable for its solidity and quality of the light.
www.simes.it/vedo 331

332
VEDO Ceiling and wall bulkhead
S.6800W
S.6850W
Vedo round with Ring
Vedo round with Visor
Die cast EN AB-47100 aluminium housing with high corrosion resistance. Sand blasted glass diffuser (Vandalproof opal polycarbonate diffuser available on request). Stainless steel screws.
Luminaire with double cable entry and grommet.
EPDM gaskets.
Double powder paint.
Colours:
White
Aluminium grey (code 14)
Protection class
IP55
Isolation class
CLASS I y Mechanical resistance
IK 06
Leds 4000K CRI80 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
H 2,
5m
lux
(code 01)
H 2,
5m
lux

VEDO
175 125
S.6700W Vedo oval with Ring
MID-POWER LEDs 3000K CRI80 1150lm Rated luminaire luminous flux 827lm
Rated input power 13,5W
220V-230V AC 50/60Hz Phase-cut dimmable
175 130
S.6740W Vedo oval with Up-Down Visor
MID-POWER LEDs 3000K CRI80 1150lm Rated luminaire luminous flux 458lm
Rated input power 13,5W
220V-230V AC 50/60Hz Phase-cut dimmable
175 130
S.6750W Vedo oval with Visor
MID-POWER LEDs 3000K CRI80 1150lm Rated luminaire luminous flux 398lm
Rated input power 13,5W
220V-230V AC 50/60Hz Phase-cut dimmable
Ø 260 120
S.6800W Vedo round with Ring
MID-POWER LEDs 3000K CRI80 1150lm Rated luminaire luminous flux 834lm
Rated input power 13,5W
220V-230V AC 50/60Hz Phase-cut dimmable
Ø 260 130
S.6840W Vedo round with Up-Down Visor
MID-POWER LEDs 3000K CRI80 1150lm Rated luminaire luminous flux 427lm
Rated input power 13,5W
220V-230V AC 50/60Hz Phase-cut dimmable
Ø 260 130
S.6850W Vedo round with Visor
MID-POWER LEDs 3000K CRI80 1150lm Rated luminaire luminous flux 386lm
Rated input power 13,5W
220V-230V AC 50/60Hz Phase-cut dimmable
333
300
300
300

334

Plafoniere
Ceiling and wall bulkhead
The well known Plafoniere bulkhead, solid and with classical design, features the newest technologies applied to the LED lighting sources.
www.simes.it/plafoniere 335

PLAFONIERE Ceiling and wall bulkhead
336
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Sand blasted glass diffuser.
Stainless steel screws.
Luminaire with double cable entry and grommet.
Double powder paint.
Protection class
IP54
Isolation class
CLASS I y
Leds 4000K CRI80 versions are
available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
S.6530W Round Bul with ring
S.6550W Round Bul with visor
Colours:
White Black
(code 01) (code 09) (code 14)
Aluminium
(Only for PLAFONIERE BUL VERSION)
H 2,
H 2,
5m
lux
5m
lux

PLAFONIERE
Ø 240
Ø 240
S.6530W Round Bul with ring
MID-POWER LEDs 3000K CRI80 1150lm Rated luminaire luminous flux 873lm
Rated input power 13,5W
220V-230V AC 50/60Hz Phase-cut dimmable
S.6500W Round with ring
MID-POWER LEDs 3000K CRI80 1150lm Rated luminaire luminous flux 912lm
Rated input power 13,5W
220V-230V AC 50/60Hz Phase-cut dimmable
S.6550W
Round Bul with visor
Ø 240
MID-POWER LEDs 3000K CRI80 1150lm Rated luminaire luminous flux 414lm
Rated input power 13,5W
220V-230V AC 50/60Hz Phase-cut dimmable
S.6505W Round with cage
MID-POWER LEDs 3000K CRI80 1150lm Rated luminaire luminous flux 784lm
Rated input power 13,5W
220V-230V AC 50/60Hz Phase-cut dimmable
Ø 240
280
280
S.6510W Oval with ring
MID-POWER LEDs 3000K CRI80 1150lm Rated luminaire luminous flux 795lm
Rated input power 13,5W
220V-230V AC 50/60Hz Phase-cut dimmable
S.6516W Oval with visor
MID-POWER LEDs 3000K CRI80 1150lm Rated luminaire luminous flux 391lm
Rated input power 13,5W
220V-230V AC 50/60Hz Phase-cut dimmable
S.6515W Oval with cage
MID-POWER LEDs 3000K CRI80 1150lm Rated luminaire luminous flux 682lm
Rated input power 13,5W
220V-230V AC 50/60Hz Phase-cut dimmable
280
337
140 165
128 165
143 160
140 165
155 160

338

Design K.Begasse
Smooth
Wall effect and pole mounted
Smooth is the summary of both technical and aesthetic expressions taken to the extreme. The proportions, the absence of sharp edges, the smooth and continuous surface without interruptions embracing its technological core, are the result of careful research. The strong performance in functional and accent lighting are guaranteed by the latest generation of LED, combined with specific reflectors.
2017
www.simes.it/smooth 339

340
SMOOTH Wall effect and pole mounted
Die-cast EN AB-47100 and extruded EN AW-6060 aluminium housing with high corrosion resistance.
Toughened glass diffuser 4mm thick. Pre-wired luminaire with single cable and connector (Minismooth and Smooth).
Luminaire with one single cable entry and grommet (Megasmooth). Silicone gaskets.
Double powder paint.
Colours:
White
Aluminium grey (code 14)
Colour for Smooth pole mounted:
Aluminium grey (code 14)
Protection class
IP65
Isolation class
CLASS II q Mechanical resistance
IK 06
Leds 4000K CRI90 versions are available on request.
On request with surcharge ballast as allow an automatic power and flux reduction without the need of any external control systems (Megasmooth pole mounted).
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
PATENTED REGISTERED DESIGN
Uniform distribution
The balance between the source, the reflector and the protruding semi-frosted glass creates a soft and uniform light distribution.
Clean design
The continuous surface of the cover embraces, as a curved sheet, the internal luminaire. Junctions, screws and fastening elements are totally hidden to obtain a completely “smooth” shape and a clean design.
(code 01)

SMOOTH Wall effect Minismooth
60 S.2900W Single emission
38° 3000K h(m) Ø(m) E(lx)
1 0.74 820 2 1.47 205 3 2.21 91 4 2.94 51 5 3.68 33
38° 3000K h(m) Ø(m) E(lx)
1 0.74 820 2 1.47 205 3 2.21 91 4 2.94 51 5 3.68 33
37° 3000K h(m) Ø(m) E(lx)
2 1.32 614 4 2.65 153 6 3.97 68 8 5.29 38 10 6.61 25
37° 3000K h(m) Ø(m) E(lx)
2 1.32 614 4 2.65 153 6 3.97 68 8 5.29 38 10 6.61 25
59° 3000K h(m) Ø(m) E(lx)
2 2.28 735 4 4.56 184 6 6.84 82 8 9.13 46 10 11.41 29
59° 3000K h(m) Ø(m) E(lx)
2 2.28 735 4 4.56 184 6 6.84 82 8 9.13 46 10 11.41 29
38°
34
HIGH-POWER LED 3000K CRI90 495lm Rated luminaire luminous flux 442lm
Rated input power 5,5W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
Computer-simulated photometrics
S.2905W Double emission
2 HIGH-POWER LED3000K CRI90 990lm Rated luminaire luminous flux 884lm
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
Computer-simulated photometrics
38°
38°
Smooth
85 S.2910W Single emission
COB LED 3000K CRI90 1430lm
Rated luminaire luminous flux 1083lm Rated input power 13,5W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
41 S.2915W Double emission
37°
37°
37°
Megasmooth
2 COB LEDs 3000K CRI90 2860lm
Rated luminaire luminous flux 2166lm Rated input power 27W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
S.2920W Single emission
COB LED 3000K CRI90 2945lm
Rated luminaire luminous flux 2548lm Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
S.2925W Double emission
110
59°
59°
59°
46 2 COB LEDs 3000K CRI90 5890lm Rated luminaire luminous flux 5096lm
Rated input power 54W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
341
200 420
155 330 115 240

SMOOTH Pole mounted
The Smooth and Megasmooth pole versions have extended the project application configurations of this new wall mounted luminaire. Thanks to the special anchor base the luminaire can be fixed to new or existing poles of diameter of 60/76mm (Smooth) and 76/102mm (Megasmooth).
Smooth pole mounted
Megasmooth pole mounted
POLES WITH BASE
76
POLES TO BE BURIED
S.2930W
COB LED 3000K CRI80 2152lm
Rated luminaire luminous flux 1639lm Rated input power 18W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
Suitable for pole Ø 60 and Ø 76 (Pole not included)
S.2940W
COB LED 3000K CRI80 3438lm
Rated luminaire luminous flux 2755lm Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
Suitable for pole Ø 76 and Ø 102 (Pole not included)
110 235
46
85
41
180
S.2843
Ø 60 mm CYLINDRICAL POLE WITH BASE
Pole total height 3500mm
S.2845
Ø 76 mm CYLINDRICAL POLE WITH BASE
Pole total height 4500mm Provided with inspection door
S.2849
PLANTED ROOT FOR S.2843 / S.2845 h=470mm and bolts in galvanized steel with M16 threads.
76 102
S.2842
Ø 60 mm CYLINDRICAL POLE TO BE BURIED
Pole total height 4000mm To be buried for 500mm
S.2844
Ø 76 mm CYLINDRICAL POLE TO BE BURIED Pole total height 5000mm
To be buried for 500mm
Provided with inspection door
S.2814
Ø 102 mm CYLINDRICAL POLE TO BE BURIED Pole total height 5000 mm
To be buried for 500 mm
Provided with inspection door
60
60
342
3500 500 4500 500 4500
500
3500 4500
180 334
235 428

343

344

Slot
Wall effect
High flexibility can be considered one of the main plus of SLOT. Able to ensure functional lighting with excellent light output, SLOT also allow to create more or less marked light accents suitable for variuos applications. The double emission versions house two LED sources, each one with its own adjustable reflector and independent control gear.
www.simes.it/slot 345

SLOT Wall effect
Die-cast EN AB-47100 and extruded EN AW-6060 aluminium housing with high corrosion resistance.
Toughened glass diffuser
6mm thick for Microslot,
8mm thick for Minislot,
8mm thick for Slot.
Luminaire with one single cable entry and grommet (Microslot).
Pre-wired luminaire with single cable and connector.
Stainless steel screws.
Silicone gaskets.
Double powder paint.
Colour:
Aluminium grey (code 14)
Protection class
IP65
Isolation class
CLASS I y
Mechanical resistance
IK 08
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
346

MICROSLOT ROUND
Wall single emission

Wall double emission
55
90
S.3903W
HIGH-POWER LEDs 3000K CRI90 425lm Rated luminaire luminous flux 327lm
Rated input power 6W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Beam lenses available on request with no surcharge: 22° and 34°
S.3913W
HIGH-POWER LEDs 3000K CRI90 425lm
Rated luminaire luminous flux 654lm
Rated input power 12W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Beam lenses available on request with no surcharge: 22° and 34°
9° 3000K h(m) Ø(m) E(lx)
1 0.16 7297 2 0.33 1824 3 0.49 811 4 0.66 456 5 0.82 292
9° 3000K h(m) Ø(m) E(lx)


MINISLOT ROUND
90 55
1 2 3 4 5
0.16 7297 0.33 1824 0.49 811 0.66 456 0.82 292
Wall single emission
28°
Wall double emission
140 70
S.3950W
HIGH-POWER LEDs 3000K CRI90 1180lm Rated luminaire luminous flux 834lm
Rated input power 16W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Beam lenses available on request with no surcharge: 8°, 38°, 58° and 10°x44°
S.3952W
HIGH-POWER LEDs 3000K CRI90 2360lm Rated luminaire luminous flux 1668lm Rated input power 32W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Beam lenses available on request with no surcharge: 8°, 38°, 58° and 10°x44°
28° 3000K h(m) Ø(m) E(lx)
2 1.00 833 4 2.01 208 6 3.01 93 8 4.02 52 10 5.02 33
28° 3000K h(m) Ø(m) E(lx)
2 1.00 833 4 2.01 208 6 3.01 93 8 4.02 52 10 5.02 33
28°
28°
55
140
347
75
80 75 75
450
315 250 250

SLOT ROUND
Wall single emission
Wall double emission
S.3960W
HIGH-POWER LEDs 3000K CRI90 2125lm
Rated luminaire luminous flux 1332lm Rated input power 27W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Beam lenses available on request with no surcharge: 8°, 38°, 58° and 10°x44°
29° 3000K h(m) Ø(m) E(lx)
29°
200
75
2 4 6 8 10
1.06 1243 2.11 311 3.17 138 4.23 78 5.28 50
S.3962W
HIGH-POWER LEDs 3000K CRI90 4248lm Rated luminaire luminous flux 2664lm Rated input power 54W
220V-240V AC 50/60Hz / DC Not Dimmable
29° 3000K h(m) Ø(m) E(lx)
2 1.06 1243 4 2.11 311 6 3.17 138 8 4.23 78 10 5.28 50
29°
29°
348
75
Beam lenses available on request with no surcharge: 8°, 38°, 58° and 10°x44°
200 Adjustable ±15° optic
97 97
450
450

349
Mansfield Bus Station, Nottinghamshire, England

Ceiling mounted Downlight
Stage round ceiling 352 Catch surface 356 Loft square ceiling 323
350

Recessed Downlight
Catch recessed 360 Lobby 370 Zip downlight 376 Nanoled downlight 100 Stainless Steel
351

352

Stage round
Ceiling mounted Downlight
This minimal and versatile downlight range comes from the Stage Round projector family. Available in four different sizes, these simple cylindrical objects are equipped with comfortable optics and ensure extremely high performance, both in terms of quality and light emission.
Stage Round for ceiling applications is easy to install and it fits discreetly in all cases where recessed solutions are not suitable.
www.simes.it/stageround 353

STAGE ROUND Ceiling mounted Downlight
Private villa, Italy – Arch. Duilio Damilano © ph. Mario Bertani
S.5506
4 way connector for through wiring (in/out) only for ceiling versions of Megastage
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Stainless steel screws.
99.98% pure aluminium reflectors. Clear toughened glass diffuser. Luminaire supplied with 5m of cable (Microstage).
Luminaire supplied with 3m of cable (Ministage).
Pre-wired luminaire with neoprene cable and connector (Stage and Megastage).
Silicone gaskets.
Double powder paint.
Colours:
(code 01) Aluminium grey (code 14)
Protection class
IP66
Isolation class
CLASS II
Mechanical resistance
IK 07 MICRO / MINISTAGE ROUND IK 08 STAGE / MEGA ROUND
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to the official website (www.simes.it)
REGISTERED DESIGN
354
White

STAGE ROUND
Microstage round ceiling
Mnistage round ceiling
Ø 68
Ø 62
Ø 98
Ø 93
S.1405W
1 COB LED 3000K CRI90 350lm
Rated luminaire luminous flux 284lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1415W
1 COB LED 3000K CRI90 1225lm
Rated luminaire luminous flux 1040lm Rated input power 11,2W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1416W
1 COB LED 3000K CRI90 1225lm
Rated luminaire luminous flux 1074lm Rated input power 11,2W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1425W
1 COB LED 3000K CRI90 4290lm
Rated luminaire luminous flux 3095lm Rated input power 37W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1426W
1 COB LED 3000K CRI90 4290lm
Rated luminaire luminous flux 3118lm Rated input power 37W
220V-240V AC 50/60Hz / DC Not Dimmable
S.1435W
1 COB LED 3000K CRI90 6700lm
Rated luminaire luminous flux 5400lm Rated input power 62,5W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
S.1436W
1 COB LED 3000K CRI90 6700lm
Rated luminaire luminous flux 5400lm Rated input power 62,5W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
34° 3000K h(m) Ø(m) E(lx)
1 0.62 643 2 1.23 161 3 1.85 71 4 2.46 40 5 3.08 26
27° 3000K h(m) Ø(m) E(lx)
1 0.49 3453 2 0.98 863 3 1.46 384 4 1.95 216 5 2.44 64
58° 3000K h(m) Ø(m) E(lx)
1 1.10 1221 2 2.20 305 3 3.30 136 4 4.40 76 5 5.50 49
30° 3000K h(m) Ø(m) E(lx)
2 1.06 2748 4 2.11 687 6 3.17 305 8 4.23 172 10 5.28 110
58° 3000K h(m) Ø(m) E(lx)
2 2.22 939 4 4.43 235 6 6.65 104 8 8.87 59 10 11.09 38
30° 3000K h(m) Ø(m) E(lx)
2 1.06 4795 4 2.11 1199 6 3.17 533 8 4.23 300 10 5.28 192
58° 3000K h(m) Ø(m) E(lx)
2 2.22 1624 4 4.43 406 6 6.65 180 8 8.87 102 10 11.09 65
34°
27°
58°
Stage round ceiling
30°
Ø 150
Ø 145
58°
Megastage round ceiling
30°
Ø 200
Ø 191
58°
355
246
192
125 85

356

Catch surface
Ceiling mounted comfort optic
Catch is a new surface mounted downlight with a minimalistic design. Developed from clusters of square optical systems, Catch comes with an adjustable square or rectangular housing with inbuilt tiltable optics providing flexible beam distribution. The led chips are positioned inside specific cowels and are not visible therefore resulting in excellent visual comfort and antiglare characteristics. Catch surface mounted is only 8 cm in depth with an integral driver with an easy installation process.
www.simes.it/catchsurface 357

CATCH SURFACE Ceiling mounted comfort optic
Private villa, Italy – Arch. Duilio Damilano © ph. Mario Bertani
Comfortable Optics
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Clear polycarbonate lenses.
Toughened glass 5mm thick.
Stainless steel screws.
Pre-wired luminaire with 0,4m of neoprene cable.
Double powder paint.
Colours:
Protection class
358
(code 01) Aluminium grey (code 14)
White
IP65 The sophisticated optics focuses the beam and makes the light comfortable
Isolation class
CLASS II q Mechanical resistance
IK 08
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
by reducing the direct glare of the light source.
No glare Visual comfort

CATCH SURFACE
Square 4LEDs aluminium housing
131 x 131
S.7500W
4 HIGH-POWER LEDs 3000K CRI90 620lm
Rated luminaire luminous flux 448lm
Rated input power 7,6W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15°
S.7501W
4 HIGH-POWER LEDs 3000K CRI90 620lm
Rated luminaire luminous flux 415lm
Rated input power 7,6W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15°
Beam lenses available on request with no surcharge: 7°, 10°x44°
S.7520W
9 HIGH-POWER LEDs 3000K CRI90 1390lm
Rated luminaire luminous flux 985lm
Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
S.7521W
9 HIGH-POWER LEDs 3000K CRI90 1390lm
Rated luminaire luminous flux 761lm
Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Beam lenses available on request with no surcharge: 7°, 10°x44°
S.7560W
20 HIGH-POWER LEDs 3000K CRI90 3140lm
Rated luminaire luminous flux 2281lm Rated input power 32W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
S.7561W
20 HIGH-POWER LEDs 3000K CRI90 3140lm
Rated luminaire luminous flux 1815lm Rated input power 32W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Beam lenses available on request with no surcharge: 7°, 10°x44°
h(m) Ø(m)
1 0.60 2 1.21 3 1.81 4 2.42 5 3.02
h(m) Ø(m)
1 1.27 2 2.55 3 3.82 4 5.10 5 6.37
34°
65°
E(lx)
1254 314 139 78 50
E(lx)
399 100 44 25 16
34°
65°
Square 9LEDs aluminium housing
34°
h(m) Ø(m)
1 0.60 2 1.21 3 1.81 4 2.42 5 3.02
h(m) Ø(m)
1 1.24 2 2.48 3 3.72 4 4.96 5 6.20
34°
63°
E(lx)
2719 680 302 170 109
E(lx)
752 188 84 47 30
63°
157 x 157
Rectangular 20LEDs aluminium housing
34°
h(m) Ø(m)
1 0.62 2 1.23 3 1.85 4 2.46 5 3.08
h(m) Ø(m)
1 1.23 2 2.46 3 3.69 4 4.92 5 6.15
34°
63°
E(lx)
6177 1544 686 386 247
E(lx)
1835 459 204 115 73
63°
131 x 340
359
80
80
80

360

Stainless steel Aluminium
Fixed optic
Adjustable optic
Catch
recessed
Downlight comfort optic
Catch is an innovative square and rectangular downlight range that combines great visual comfort, minimalist dimensions and adjustability thanks to its tilting optical base.
Through the use of state-of-the-art cowls the optical system is glare free highlighting the importance of visual comfort required when using LED sources. The reduced recessed dimensions allows for shallow depth installations and the remote drivers provides a quick and easy install, with DALI options available on request. The adjustable version of Catch can be installed either flush with the external trim or with a limited protrusion allowing greater tilt adjustability and improved beam angle precision.
Catch is available in fixed or adjustable version with aluminium or stainless steel trim with improved aesthetics and suitable for more extreme applications.
www.simes.it/catch 361

CATCH RECESSED Downlight comfort optic
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Aluminium or marine grade stainless steel AISI 316L.
Protection class
IP65
Isolation class
CLASS II q Mechanical resistance
IK 08
Leds 4000K CRI90 versions are available on request.
Adjustable optic
Catch adjustable can be installed perfectly flush to the trim or with a slight protrusion of 15mm of the optics.
Comfortable Optics
The sophisticated optics focuses the beam and makes the light comfortable by reducing the direct glare of the light source.
Clear polycarbonate lenses. Toughened glass 5mm thick. Stainless steel screws.
Pre-wired luminaire with 0,4m of neoprene cable.
Double powder paint.
CATCH adjustable optic finishing:
Front ring-body Aluminium grey Front ring-body White
Stainless steel front ring and black painted body
CATCH fixed optic finishing:
Front ring-body Aluminium grey Front ring-body in White Stainless steel front ring and black painted body
(code 14) (code 01)
(code 19)
(code 14) (code 01)
(code 19)
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
Casa Y, Pino Torinese, Torino, Italy © Arch. Luca Maria Gandini ph. Mario Bertani
362
REGISTERED DESIGN
No glare Visual comfort

CATCH RECESSED SQUARE 4 LED Adjustable optic Aluminium front ring
115 x 115
133 x 133
Stainless steel front ring
h(m) Ø(m)
1 1.27 2 2.55 3 3.82 4 5.10 5 6.37
S.7400W
4 HIGH-POWER LEDs 3000K CRI90 620lm Rated luminaire luminous flux 448lm
Rated input power 7,6W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±20°
S.7401W
4 HIGH-POWER LEDs 3000K CRI90 620lm
Rated luminaire luminous flux 415lm
Rated input power 7,6W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±20°
Beam lenses available on request with no surcharge: 7°, 10°x44°
S.7405W.19
4 HIGH-POWER LEDs 3000K CRI90 620lm Rated luminaire luminous flux 448lm
Rated input power 7,6W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±20°
S.7406W.19
4 HIGH-POWER LEDs 3000K CRI90 620lm Rated luminaire luminous flux 415lm
Rated input power 7,6W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±20°
Beam lenses available on request with no surcharge: 7°, 10°x44°
S.7409
HOUSING FOR CONCRETE CEILINGS
for CATCH SQUARE 4 LED ADJUSTABLE OPTIC Dim. 220 x 380 x 120mm
Hole 115 x 115mm
h(m) Ø(m)
34°
65°
E(lx)
1254 314 139 78 50
E(lx)
399 100 44 25 16
34°
1 2 3 4 5
0.60 1.21 1.81 2.42 3.02
65°
34°
115 x 115
133 x 133
h(m) Ø(m)
1 0.60 2 1.21 3 1.81 4 2.42 5 3.02
h(m) Ø(m)
1 1.27 2 2.55 3 3.82 4 5.10 5 6.37
34°
65°
E(lx)
1254 314 139 78 50
E(lx)
399 100 44 25 16
65°
380
363
120 220
1÷30
1÷30
15
94
15
94

CATCH RECESSED SQUARE 4 LED Fixed optic Aluminium front ring
S.7410W
4 HIGH-POWER LEDs 3000K CRI90 840lm
Rated luminaire luminous flux 582lm
Rated input power 10,3W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
S.7411W
4 HIGH-POWER LEDs 3000K CRI90 840lm
Rated luminaire luminous flux 589lm
Rated input power 10,3W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
Beam lenses available on request with no surcharge: 7°, 10°x44°
S.7415W.19
4 HIGH-POWER LEDs 3000K CRI90 840lm
Rated luminaire luminous flux 582lm
Rated input power 10,3W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
S.7416W.19
4 HIGH-POWER LEDs 3000K CRI90 840lm
Rated luminaire luminous flux 589lm
Rated input power 10,3W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
Beam lenses available on request with no surcharge: 7°, 10°x44°
h(m) Ø(m)
34°
65°
E(lx)
1629 407 181 102 65
E(lx)
566 142 63 35 23
34°
1 2 3 4 5
0.60 1.21 1.81 2.42 3.02
65°
105 x 105
117 x 117
Stainless steel front ring
h(m) Ø(m)
1 1.27 2 2.55 3 3.82 4 5.10 5 6.37
34°
h(m) Ø(m)
1 0.60 2 1.21 3 1.81 4 2.42 5 3.02
h(m) Ø(m)
1 1.27 2 2.55 3 3.82 4 5.10 5 6.37
34°
65°
E(lx)
1629 407 181 102 65
E(lx)
566 142 63 35 23
65°
105 x 105
117 x 117
380
S.7419
HOUSING FOR CONCRETE CEILINGS
for CATCH SQUARE 4 LED FIXED OPTIC Dim. 220 x 380 x 120mm
Hole 105 x 105mm
364
120 220
1÷30
1÷30
83
83

365
Casa Y, Pino Torinese, Torino, Italy © Arch. Luca Maria Gandini ph. Mario Bertani

CATCH RECESSED SQUARE 9 LED Adjustable optic Aluminium front ring
148 x 148
159 x 159
Stainless steel front ring
148 x 148
159 x 159
h(m) Ø(m)
1 1.24 2 2.48 3 3.72 4 4.96 5 6.20
S.7420W
9 HIGH-POWER LEDs 3000K CRI90 1390lm Rated luminaire luminous flux 985lm
Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±20° optic
S.7421W
9 HIGH-POWER LEDs 3000K CRI90 1390lm Rated luminaire luminous flux 761lm
Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±20° optic
Beam lenses available on request with no surcharge: 7°, 10°x44°
S.7425W.19
9 HIGH-POWER LEDs 3000K CRI90 1390lm
Rated luminaire luminous flux 985lm
Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±20° optic
S.7426W.19
9 HIGH-POWER LEDs 3000K CRI90 1390lm
Rated luminaire luminous flux 761lm
Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±20° optic
Beam lenses available on request with no surcharge: 7°, 10°x44°
S.7429
HOUSING FOR CONCRETE CEILINGS
for CATCH SQUARE 9 LED ADJUSTABLE OPTIC Dim. 220 x 380 x 120mm
Hole 148 x 148mm
h(m) Ø(m)
34°
63°
E(lx)
2719 680 302 170 109
E(lx)
752 188 84 47 30
34°
1 2 3 4 5
0.60 1.21 1.81 2.42 3.02
63°
34°
h(m) Ø(m)
1 0.60 2 1.21 3 1.81 4 2.42 5 3.02
h(m) Ø(m)
1 1.24
2 2.48
3 3.72
4 4.96
5 6.20
34°
63°
E(lx)
2719 680 302 170 109
E(lx)
752 188 84 47 30
63°
380
366
120 220
1÷30
1÷30
15
98
15
98

CATCH SQUARE RECESSED 9 LED Fixed optic Aluminium front ring
131 x 131
141 x 141
Stainless steel front ring
S.7430W
9 HIGH-POWER LEDs 3000K CRI90 1890lm Rated luminaire luminous flux 1329lm
Rated input power 20,7W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
S.7431W
9 HIGH-POWER LEDs 3000K CRI90 1890lm Rated luminaire luminous flux 1027lm
Rated input power 20,7W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
Beam lenses available on request with no surcharge: 7°, 10°x44°
S.7435W.19
9 HIGH-POWER LEDs 3000K CRI90 1890lm
Rated luminaire luminous flux 1329lm Rated input power 20,7W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
S.7436W.19
9 HIGH-POWER LEDs 3000K CRI90 1890lm
Rated luminaire luminous flux 1027lm Rated input power 20,7W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
Beam lenses available on request with no surcharge: 7°, 10°x44°
S.7439
HOUSING FOR CONCRETE CEILINGS
for CATCH SQUARE 9 LED FIXED OPTIC Dim. 220 x 380 x 120mm
Hole 131 x 131mm
h(m) Ø(m)
1 0.60 2 1.21 3 1.81 4 2.42 5 3.02
h(m) Ø(m)
1 1.24 2 2.48 3 3.72 4 4.96 5 6.20
34°
63°
E(lx)
3644 911 405 228 146
E(lx)
1009 252 112 63 40
34°
63°
34°
h(m) Ø(m)
1 0.60 2 1.21 3 1.81 4 2.42 5 3.02
h(m) Ø(m)
1 1.24 2 2.48 3 3.72 4 4.96 5 6.20
34°
63°
E(lx)
3644 911 405 228 146
E(lx)
1009 252 112 63 40
63°
131 x 131
143 x 143
380
367
120 220
1÷30
1÷30
95
92

CATCH RECESSED RECTANGULAR 20 LED Adjustable optic Aluminium front ring
S.7460W
20 HIGH-POWER LEDs 3000K CRI90 3140lm
Rated luminaire luminous flux 2281lm Rated input power 32W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±20° optic
S.7461W
20 HIGH-POWER LEDs 3000K CRI90 3140lm
Rated luminaire luminous flux 1815lm Rated input power 32W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±20° optic
Beam lenses available on request with no surcharge: 7°, 10°x44°
S.7465W.19
20 HIGH-POWER LEDs 3000K CRI90 3140lm
Rated luminaire luminous flux 2281lm Rated input power 32W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±20° optic
S.7466W.19
20 HIGH-POWER LEDs 3000K CRI90 3140lm
Rated luminaire luminous flux 1815lm Rated input power 32W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±20° optic
Beam lenses available on request with no surcharge: 7°, 10°x44°
h(m) Ø(m)
34°
63°
E(lx)
6177 1544 686 386 247
E(lx)
1835 459 204 115 73
34°
1 2 3 4 5
0.62 1.23 1.85 2.46 3.08
63°
331 x 118
341 x 133
Stainless steel front ring
h(m) Ø(m)
1 1.23 2 2.46 3 3.69 4 4.92 5 6.15
34°
h(m) Ø(m)
1 0.62
2 1.23
3 1.85
4 2.46
5 3.08
h(m) Ø(m)
1 1.23
2 2.46
3 3.69
4 4.92
5 6.15
34°
63°
E(lx)
6177 1544 686 386 247
E(lx)
1835 459 204 115 73
63°
331 x 118
341 x 133
360
S.7469
HOUSING FOR CONCRETE CEILINGS
for CATCH RECTANGULAR 20 LED ADJUSTABLE OPTIC Dim. 400 x 360 x 120mm
Hole 331 x 118mm
368
120 400
1÷30
1÷30
15
98
15
98

CATCH RECESSED RECTANGULAR 20 LED Fixed optic Aluminium front ring
S.7470W
20 HIGH-POWER LEDs 3000K CRI90 3140lm
Rated luminaire luminous flux 2281lm Rated input power 32W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
S.7471W
20 HIGH-POWER LEDs 3000K CRI90 3140lm
Rated luminaire luminous flux 1815lm Rated input power 32W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
Beam lenses available on request with no surcharge: 7°, 10°x44°
S.7475W.19
20 HIGH-POWER LEDs 3000K CRI90 3140lm
Rated luminaire luminous flux 2281lm Rated input power 32W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
S.7476W.19
20 HIGH-POWER LEDs 3000K CRI90 3140lm Rated luminaire luminous flux 1815lm
Rated input power 32W
220V-240V AC 50/60Hz / DC Not Dimmable Led position fixed
Beam lenses available on request with no surcharge: 7°, 10°x44°
h(m) Ø(m)
1 0.62
2 1.23
3 1.85
4 2.46
5 3.08
h(m) Ø(m)
1 1.23 2 2.46 3 3.69 4 4.92 5 6.15
34°
63°
E(lx)
6177 1544 686 386 247
E(lx)
1835 459 204 115 73
34°
63°
313 x 105
323 x 115
Stainless steel front ring
313 x 105
325 x 117
360
h(m) Ø(m)
1 0.62 2 1.23 3 1.85 4 2.46 5 3.08
h(m) Ø(m)
1 1.23 2 2.46 3 3.69 4 4.92 5 6.15
34°
63°
E(lx)
6177 1544 686 386 247
E(lx)
1835 459 204 115 73
34°
63°
S.7479
HOUSING FOR CONCRETE CEILINGS
for CATCH RECTANGULAR 20 LED FIXED OPTIC Dim. 400 x 360 x 120mm
Hole 313 x 105mm
369
120 400
1÷30 1÷30
96
92

370

Lobby
Recessed Downlight
LOBBY is an outdoor LED downlight. Innovative and highly performing, it is entirely designed by SIMES R&D using new and powerful software to study and maximize the heat dissipation. LOBBY comes in two versions, basic and professional, to satisfy different market requirements. A main optic, with acid-etched diffuser, increases the homogeneity of the luminous flux, a secondary optic distributes the light without glare.
www.simes.it/lobby 371

372
LOBBY Recessed Downlight
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Aluminium front trim with visible screws for Lobby Basic.
Marine grade stainless steel AISI 316L front trim with interlocking clips system for Lobby Professional.
Reflector in polymers covered with 99.98% pure aluminium.
Toughened glass 10 mm thick. Stainless steel screws.
Luminaire supplied with 0,5m of cable for (Lobby Basic).
Luminaire with double cable entry and cable glands (Lobby Professional). Silicone gaskets.
Double powder paint.
Finishing:
Aluminium grey (code 14) for Lobby Basic
Stainless steel (code 19) for Lobby Professional
Protection class
IP65
Isolation class
CLASS I y Lobby Basic
CLASS II q Lobby Professional
Mechanical resistance
IK 10
Panorama Conference Hotel, Forland, Bergen, Norway © Straume Elektro / Fagerhult
Leds 4000K CRI80 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
PATENTED

MINILOBBY BASIC
Aluminium trim
200
S.7309
HOUSING FOR CONCRETE CEILINGS
for MINILOBBY BASIC Dim. 200 x 200 x 120mm
S.7300W
1 COB LED 3000K CRI83 800lm
Power supply integrated in the LED module Rated luminaire luminous flux 563lm Rated input power 8,6W
220V-230V AC 50/60Hz Not Dimmable
S.7305W
1 COB LED 3000K CRI83 800lm
Power supply integrated in the LED module Rated luminaire luminous flux 658lm Rated input power 8,6W
220V-230V AC 50/60Hz Not Dimmable
57°
h(m) Ø(m)
57°
23°
E(lx)
554 139 62 35 22
E(lx)
2983 746 331 186 119
1 2 3 4 5
1.09 2.19 3.28 4.38 5.47
23°
LOBBY BASIC
Aluminium trim
Ø 130
Ø 140
260
h(m) Ø(m)
1 2 3 4 5
0.41 0.83 1.24 1.66 2.07
S.7329
HOUSING FOR CONCRETE CEILINGS
for LOBBY BASIC
Dim. 260 x 260 x 150mm
S.7320W
1 COB LED 3000K CRI83 2000lm
Power supply integrated in the LED module Rated luminaire luminous flux 1623lm Rated input power 19,6W
220V-230V AC 50/60Hz Not Dimmable
S.7325W
1 COB LED 3000K CRI83 2000lm
Power supply integrated in the LED module Rated luminaire luminous flux 1769lm Rated input power 19,6W
220V-230V AC 50/60Hz Not Dimmable
h(m) Ø(m)
79°
36°
E(lx)
1078 269 120 67 43
E(lx)
3741 935 416 234 150
79°
Ø 200
1 2 3 4 5
1.64 3.27 4.91 6.55 8.18
36°
Ø 190
h(m) Ø(m)
1 0.66 2 1.32 3 1.97 4 2.63 5 3.29
373
130
150 260
110
120 200

MINILOBBY PROFESSIONAL
Stainless steel trim
360 S.7349
HOUSING FOR CONCRETE CEILINGS
for MINILOBBY PROFESSIONAL Dim. 360 x 200 x 170mm
S.7340W.19
1 COB LED 3000K CRI90 1470lm
Rated luminaire luminous flux 852lm
Rated input power 14,5W
220V-240V AC 50/60Hz / DC Not Dimmable
S.7345W.19
1 COB LED 3000K CRI90 1470lm
Rated luminaire luminous flux 1060lm Rated input power 14,5W
220V-240V AC 50/60Hz / DC Not Dimmable
h(m) Ø(m)
1 1.04 2 2.07 3 3.11 4 4.15 5 5.18
h(m) Ø(m)
1 0.36
2 0.73
3 1.09
4 1.45
5 1.82
55°
21°
E(lx)
894 223 99 56 36
E(lx)
5384 1346 598 337 215
55°
21°
LOBBY PROFESSIONAL
Stainless steel trim
335
Ø 130
Ø 145
400
S.7369
HOUSING FOR CONCRETE CEILINGS
for LOBBY PROFESSIONAL Dim. 400 x 260 x 170mm
S.7360W.19
1 COB LED 3000K CRI90 2950lm
Rated luminaire luminous flux 1884lm Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable
S.7365W.19
1 COB LED 3000K CRI90 2950lm
Rated luminaire luminous flux 2099lm Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable
h(m) Ø(m)
1 1.34
2 2.69
3 4.03
4 5.38
5 6.72
h(m) Ø(m)
1 0.72 2 1.43 3 2.15 4 2.68 5 3.58
68°
39°
E(lx)
1459 365 162 91 58
E(lx)
4374 1094 486 273 175
68°
39°
330
Ø 190 Ø 205
374
153
170 260
170 200
143

375
Conference and Exhibition Centre, Oviedo, Spain © Estudios Técnico de Alumbrado

376

Zip Downlight comfort
Recessed
ZIP DOWNLIGHT is a range of ceiling- recessed light fittings available in square and round versions, supplied with new-generation comfort optics. This range of luminaires is the right answer to any architectural need, both functional lighting and accent lighting.
www.simes.it/zip-downlight 377

ZIP DOWNLIGHT COMFORT Recessed
Virgin Active, Brescia, Arch. Franco Scaglia © Ottavio Tomasini
RECESSING box for installation in concrete ceilings.
S.5512 MICROZIP ROUND
Dimensions: Ø 80÷124 mm h 125 mm
S.5510 MINIZIP ROUND
Dimensions: Ø 121÷165 mm h 135 mm
S.5520 ZIP ROUND
Dimensions: Ø 190 mm h 240 mm
S.5530 MEGAZIP ROUND
Dimensions: Ø 260 mm h 245 mm
RECESSING box for installation in concrete ceilings.
S.5516 MICROZIP SQUARE
Dimensions: 80÷124 mm h 125 mm
S.5511 MINIZIP SQUARE
Die-cast EN AB-44100 aluminium housing with high corrosion resistance. Marine grade stainless steel AISI 316L front trim 2 mm thick.
Toughened glass diffuser
8mm thick for MICROZIP,
8mm thick for MINIZIP,
10mm thick for ZIP,
12mm thick for MEGAZIP.
Stainless steel screws.
Luminaire supplied with 1,5m of cable (Microzip).
Luminaire with one single cable entry and cable gland (Minizip).
Luminaire with double cable entry and cable glands (Zip and Megazip). Silicone gaskets.
Protection class
IP65
Isolation class
CLASS I y Mechanical resistance
IK 09
378
Double powder paint.
Finishing:
Stainless steel
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
Dimensions:
S.5521 ZIP SQUARE
Dimensions:
121÷165 mm h 135 mm 190 mm h 240 mm
(code 19)
S.5531 MEGAZIP SQUARE
Dimensions: 260 mm h 245 mm

MICROZIP DOWNLIGHT COMFORT
Semiacid – etched glass
Ø 75
Ø 85
Semiacid – etched glass
75×75 85 x 85
S.5515W.19
1 HIGH-POWER LED 3000K CRI90 105lm Rated luminaire luminous flux 91lm
S.5515N.19
1 HIGH-POWER LED 4000K CRI90 115lm Rated luminaire luminous flux 98lm
Rated input power 2,2W
220V-230V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Beam lenses available on request with no surcharge: 12° and 26°
S.5525W.19
1 HIGH-POWER LED 3000K CRI90 105lm Rated luminaire luminous flux 91lm
S.5525N.19
1 HIGH-POWER LED 4000K CRI90 115lm Rated luminaire luminous flux 98lm
Rated input power 2,2W
220V-230V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Beam lenses available on request with no surcharge: 12° and 26°
38° 3000K 4000K h(m) Ø(m) E(lx) E(lx)
1 0.69 191 206 2 1.39 48 52 3 2.08 21 23 4 2.77 12 13 5 3.46 8 8
38° 3000K 4000K h(m) Ø(m) E(lx) E(lx)
1 0.69 191 206
2 1.39 48 52
3 2.08 21 23
4 2.77 12 13
5 3.46 8 8
38°
38°
MINIZIP DOWNLIGHT COMFORT
Semiacid – etched glass
Ø 114
Ø 135
Semiacid – etched glass
114×114
S.5545W.19
1 COB LED 3000K CRI90 350lm Rated luminaire luminous flux 284lm
S.5545N.19
1 COB LED 4000K CRI90 360lm Rated luminaire luminous flux 292lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
S.5555W.19
1 COB LED 3000K CRI90 350lm Rated luminaire luminous flux 284lm
S.5555N.19
1 COB LED 4000K CRI90 360lm Rated luminaire luminous flux 292lm
Rated input power 4,3W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
33° 3000K 4000K h(m) Ø(m) E(lx) E(lx)
1 0.62 643 656 2 1.23 161 164 3 1.85 71 73 4 2.46 40 41 5 3.08 26 26
33° 3000K 4000K
33°
33°
135 x 135
h(m) Ø(m)
1 0.62 2 1.23 3 1.85 4 2.46 5 3.08
E(lx) E(lx)
643 656 161 164 71 73 40 41 26 26
379
10÷28 10÷28
10÷28 10÷28
126 126
105 105

ZIP DOWNLIGHT COMFORT
Semiacid – etched glass
33°
Semiacid – etched glass
Ø 183
Ø 210
183×183
210 x 210
S.5565W.19
1 COB LED 3000K CRI90 1470lm Rated luminaire luminous flux 1029lm
S.5565N.19
1 COB LED 4000K CRI90 1520lm Rated luminaire luminous flux 1064m
Rated input power 14W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
S.5575W.19
1 COB LED 3000K CRI90 1470lm Rated luminaire luminous flux 1029lm
S.5575N.19
1 COB LED 4000K CRI90 1520lm Rated luminaire luminous flux 1064m
Rated input power 14W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
33° 3000K 4000K h(m) Ø(m) E(lx) E(lx)
1 0.49 3419 3522 2 0.98 855 881 3 1.46 380 391 4 1.95 214 220 5 2.44 137 141
33° 3000K 4000K h(m) Ø(m) E(lx) E(lx)
33°
1 2 3 4 5
0.49 3419 3522 0.98 855 881 1.46 380 391 1.95 214 220 2.44 137 141
MEGAZIP DOWNLIGHT COMFORT
Semiacid – etched glass
S.5585W.19
1 COB LED 3000K CRI90 2950lm Rated luminaire luminous flux 2061lm
S.5585N.19
1 COB LED 4000K CRI90 3038lm Rated luminaire luminous flux 2126lm
Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
S.5595W.19
1 COB LED 3000K CRI90 2950lm Rated luminaire luminous flux 2061lm
S.5595N.19
1 COB LED 4000K CRI90 3038lm Rated luminaire luminous flux 2126lm
Rated input power 28W
220V-240V AC 50/60Hz / DC Not Dimmable Adjustable ±15° optic
Computer-simulated photometrics
3000K 4000K
33°
h(m) Ø(m) E(lx) E(lx)
2 1.06 1814 1868 4 2.11 453 467 6 3.17 202 208 8 4.23 113 117 10 5.28 73 75
33° 3000K 4000K h(m) Ø(m) E(lx) E(lx)
2 1.06 1814 1868 4 2.11 453 467 6 3.17 202 208 8 4.23 113 117 10 5.28 73 75
33°
Ø 255
Ø 280
Semiacid – etched glass
33°
255×255
380
280×280
7÷38 7÷38
7÷30 7÷30
216 216
215 215

381

Bollard
Tomorrow
384 Reef
388 Moai
420 Trim bollard 280
Blinker bollard
200 Skill bollard
218 Step bollard
230
382
Ikonic
398 Tonight
404 Column
408 Cubiks 414

Cool bollard 290 Cool square 294 Kube 296 Look bollard 304 bollard
Look wood bollard 8 Cool wood bollard 19 Concrete bollard 10
383

384

Tomorrow
Bollard
Tomorrow is a bollard specifically developed for pedestrian areas and perfect for landscape areas as it can blend into hedges, bushes and flowerbeds. It comes with a Mid-power LED with extaordinary uniform light distribution at ground level, providing perfect homogeneous lighting without any shadows cast.
Tomorrow has very balanced and elegant proportions and is available in two different heights (45cm or 80cm).
www.simes.it/tomorrow 385

386
TOMORROW Bollard
Extruded EN AW-6060 aluminium profile, Die-cast EN AB-47100 aluminium housing with high corrosion resistance.
Micro etched prismatic glass diffuser. Stainless steel screws.
Pre-wired luminaire with neoprene cable and connector for connection in the bollard.
Protection class
IP65
Isolation class
CLASS II q Mechanical resistance
IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and product updates with LED technology please refer to the website (www.simes.it)
REGISTERED DESIGN
Silicone gaskets.
Double powder paint.
Colour:
Anthracite grey
(code 24)
Private villa, Italy – Arch. Duilio Damilano © ph. Mario Bertani

TOMORROW BOLLARD
H 45cm
200
102
S.2140W
MID-POWER LED 3000K CRI90 1680lm Rated luminaire luminous flux 1016lm Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
Luminous flux wasted upward 0%.
Pole included
H 80cm
200
102
S.2141W
MID-POWER LED 3000K CRI90 1680lm Rated luminaire luminous flux 1016lm Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
Luminous flux wasted upward 0%.
Pole included
S.2149
FLANGE FOR TOMORROW
Flange to be fixed in concrete with stainless steel screws for fixing in the ground.
387
750 50 40050

388

Reef
Bollard
REEF is a wide range of bollards and short bollards available in more dimensions and different light configurations. Its innovative design, solidity and excellent light control allow for flexible solutions and applications.
www.simes.it/reef 389

REEF Bollard
Die-cast EN AB-47100 and extruded EN AW-6060 ( bollard ) aluminium housing with high corrosion resistance. Reflector in polymers covered with aluminium (Microreef).
Reflector in aluminium 99.98% pure (Minireef e Reef).
Clear polycarbonate lens with controlled downward light emission for avoiding any glare.
Stainless steel screws.
Luminaire with one single cable entry and grommet (Microreef).
Luminaire with double cable entry and grommet (Minireef and Reef). Silicone gaskets.
Double powder paint.
Colours:
Aluminium grey (code .14)
Protection class
IP65
Isolation class
CLASS II q Mechanical resistance
IK 10
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
S.5506
4 way connector for through wiring (in/out). Only for Microreef bollard.
Private Villa, Sulzano (Brescia) Italy © Mario Bertani
S.5301
FLANGE ACCESSORY MICROREEF FOR GROUND APPLICATION
Ø 130 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
S.5200
FLANGE ACCESSORY MINIREEF
FOR GROUND APPLICATION
Ø 190 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
S.5203
FLANGE ACCESSORY REEF
FOR GROUND APPLICATION
Ø 250 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
S.3524
STAKE FOR MICROREEF
in polypropylene for temporary applications
( not suitable for bollard versions ).
S.3554
STAKE FOR MINIREEF / REEF
in polypropylene for temporary applications
( not suitable for bollard versions ).
Burnished bronze
(code 20)
390
420
270

MICROREEF
Microreef 180°
Microreef bollard 180°
130
S.5330W
4 HIGH-POWER LEDs 3000K CRI90 760lm Rated luminaire luminous flux 253lm
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable
S.5337W
4 HIGH-POWER LEDs 3000K CRI90 760lm Rated luminaire luminous flux 253lm
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable
3.0 2.4 1.8 1.2 0.6 0 0.6 1.2 1.8 2.4
Microreef 2 x 90°
130
Microreef bollard 2 x 90°
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable
S.5327W
4 HIGH-POWER LEDs 3000K CRI90 760lm Rated luminaire luminous flux 240lm
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable
S.5320W
4 HIGH-POWER LEDs 3000K CRI90 760lm 130 Rated luminaire luminous flux 240lm
130
391
2.4 1.8 1.2 0.6
3.0 2.4 1.8 1.2 0.6 0 0.6 1.2 1.8 2.4
lux
2.4 1.8 1.2 0.6
lux
385 125 385 125

MICROREEF
Microreef 360°
Microreef bollard 360°
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable
S.5317W
4 HIGH-POWER LEDs 3000K CRI90 760lm Rated luminaire luminous flux 462lm
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable
S.5311W
4 HIGH-POWER LEDs 3000K CRI90 760lm 130 Rated luminaire luminous flux 462lm
3.0 2.4 1.8 1.2 0.6 0 0.6 1.2 1.8 2.4
2.4 1.8 1.2 0.6
Microreef with grid
130
S.5370W
Microreef bollard with grid
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable
S.5377W
4 HIGH-POWER LEDs 3000K CRI90 760lm Rated luminaire luminous flux 197lm
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable
4 HIGH-POWER LEDs 3000K CRI90 760lm 130 Rated luminaire luminous flux 197lm
3.0 2.4 1.8 1.2 0.6 0 0.6 1.2 1.8 2.4
2.4 1.8 1.2 0.6
392
130
385 125 385 125

393
Borgo Bardolino, Verona, Italy © Andrea Borri Architetti

MINIREEF
Minireef 180°
Minireef bollard 180°
Minireef bollard 2 x 90°
190
S.5233W
1 COB LED 3000K CRI90 1740lm
Rated luminaire luminous flux 639lm
Rated input power 18W
220V-240V AC 50/60Hz / DC Not Dimmable
S.5263W
1 COB LED 3000K CRI90 1740lm
Rated luminaire luminous flux 639lm
Rated input power 18W
220V-240V AC 50/60Hz / DC Not Dimmable
lux
Minireef 2 x 90°
190
190
S.5223W
1 COB LED 3000K CRI90 1740lm
Rated luminaire luminous flux 537lm
Rated input power 18W
220V-240V AC 50/60Hz / DC Not Dimmable
lux
S.5253W
1 COB LED 3000K CRI90 1740lm
Rated luminaire luminous flux 537lm
Rated input power 18W
220V-240V AC 50/60Hz / DC Not Dimmable
394
190
550 180 550 180

MINIREEF
Minireef 360°
Minireef bollard 360°
190
S.5210W
1 COB LED 3000K CRI90 1740lm
Rated luminaire luminous flux 1090lm Rated input power 18W
220V-240V AC 50/60Hz / DC Not Dimmable
S.5240W
1 COB LED 3000K CRI90 1740lm
Rated luminaire luminous flux 1090lm Rated input power 18W
220V-240V AC 50/60Hz / DC Not Dimmable
lux
Minireef with grid
190
Minireef bollard with grid
190
S.5213W
1 COB LED 3000K CRI90 1740lm
Rated luminaire luminous flux 470lm
Rated input power 18W
220V-240V AC 50/60Hz / DC Not Dimmable
lux
S.5243W
1 COB LED 3000K CRI90 1740lm
Rated luminaire luminous flux 470lm
Rated input power 18W
220V-240V AC 50/60Hz / DC Not Dimmable
190
395
550 180 550 180

REEF
Reef 180°
250
S.5237W
1 COB LED 3000K CRI90 3690lm Rated luminaire luminous flux 1116lm Rated input power 38W
220V-240V AC 50/60Hz Not Dimmable
Reef bollard 180°
S.5267W
1 COB LED 3000K CRI90 3690lm Rated luminaire luminous flux 1116lm Rated input power 38W
220V-240V AC 50/60Hz Not Dimmable
Reef 2 x 90°
250
250
S.5227W
1 COB LED 3000K CRI90 3690lm Rated luminaire luminous flux 927lm Rated input power 38W
220V-240V AC 50/60Hz Not Dimmable
Reef bollard 2 x 90°
S.5257W
1 COB LED 3000K CRI90 3690lm Rated luminaire luminous flux 927lm Rated input power 38W
220V-240V AC 50/60Hz Not Dimmable
396
250
675 220 675 220

REEF
Reef 360°
250
S.5217W
1 COB LED 3000K CRI90 3690lm Rated luminaire luminous flux 2102lm Rated input power 38W
220V-240V AC 50/60Hz Not Dimmable
Reef bollard 360°
S.5247W
1 COB LED 3000K CRI90 3690lm Rated luminaire luminous flux 2102lm Rated input power 38W
220V-240V AC 50/60Hz Not Dimmable
Reef with grid
250
250
S.5277W
1 COB LED 3000K CRI90 3690lm Rated luminaire luminous flux 810lm Rated input power 38W
220V-240V AC 50/60Hz Not Dimmable
Reef bollard with grid
S.5297W
1 COB LED 3000K CRI90 3690lm Rated luminaire luminous flux 810lm Rated input power 38W
220V-240V AC 50/60Hz Not Dimmable
250
397
675 220 675 220

398

Ikonic
Bollard and safety bollard
The essence of clean lines and pure forms are the underlying elements of this luminous object that guarantees superior lighting performances and visual comfort.
The perfect alignment of glass and aluminium enhances its elegance and its solidity makes this an ideal bollard for public and residential spaces.
Ikonic is now also available in safety bollard version. The public space, which increasingly requires security elements, can be furnished with an elegant object perfectly matched to the the lighting fixtures.
www.simes.it/ikonic 399

IKONIC Bollard and safety bollard
Punto Vespa, Corte Franca (Bs) Italy © SIMES S.p.A.
Ø 150
S.4219
FLANGE FOR SAFETY BOLLARD
Suitable for IKONIC SAFETY BOLLARD
Ø 200mm and for IKONIC H880mm S.4114W e IKONIC H2415mm S.4117W.
Resistant to vehicle impact of 3500Kg up to max speed of 50km/h. Steel flange h 500mm to be cemented in ground. Rooted 500mm into reinforced concrete plinth 1200x1200x1000mm (the flange must be welded to the plinth’s rebar).
S.5506
4 way connector for through wiring (in/out).
Extruded EN AW-6060 aluminium profile, Die-cast EN AB-47100 aluminium housing with high corrosion resistance.
Borosilicate glass diffuser 7mm thick. Stainless steel screws.
Pre-wired luminaire with neoprene cable and connector.
Protection class
IP65
Isolation class
CLASS II q Mechanical resistance
IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
Silicone gaskets.
Double powder paint.
400
Colour:
Aluminium grey
(code 14)
1200×1200 H1000
500 500

MINI IKONIC
ø 140 mm
Mini Ikonic H 315 mm
Ø 140
S.4101W
1 COB LED 3000K CRI90 1850lm Rated luminaire luminous flux 582lm Rated input power 17,1W
220V-240V AC 50/60Hz Not Dimmable
S.4172
FLANGE FOR MINI IKONIC Ø 140 mm
Flange to be fixed in
concrete with stainless steel screws for fixing in the ground.
S.4104W
1 COB LED 3000K CRI90 1850lm Rated luminaire luminous flux 582lm Rated input power 17,1W
220V-240V AC 50/60Hz Not Dimmable
S.4172
FLANGE FOR MINI IKONIC Ø 140 mm
Flange to be fixed in
concrete with stainless steel screws for fixing in the ground.
lux
Mini Ikonic H 755 mm
Ø 140
lux
401
755 315

IKONIC ø 200 mm Ikonic H 410 mm
Ikonic H 890 mm
Ikonic H 2415 mm
Ø 200
S.4110W
1 COB LED 3000K CRI90 3350lm
Rated luminaire luminous flux 1173lm Rated input power 37,4W
220V-240V AC 50/60Hz / DC Not Dimmable
S.4171
FLANGE FOR IKONIC Ø 200 mm
Flange to be fixed in concrete with stainless steel screws for fixing in the ground.
S.4114W
1 COB LED 3000K CRI90 3350lm
Rated luminaire luminous flux 1173lm Rated input power 37,4W
220V-240V AC 50/60Hz / DC Not Dimmable
S.4171
FLANGE FOR IKONIC Ø 200 mm
Flange to be fixed in concrete with stainless steel screws for fixing in the ground.
S.4117W
1 COB LED 3000K CRI90 3350lm
Rated luminaire luminous flux 1173lm Rated input power 37,4W
220V-240V AC 50/60Hz / DC Not Dimmable
S.4129
FLANGE FOR IKONIC Ø 200 mm H 2415 mm
Flange Ø 195mm h 800mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
Ø 200
402
Ø 200
2415
890 410

IKONIC Parking bollard / safety bollard Parking / Safety bollard H 890 mm
Ø 200
S.4213
TRAFFIC AND PARKING BOLLARD
Use flange S.4171 supplied separately for Parking bollard application
Use flange S.4219 supplied separately for Safety bollard application
S.4171
FLANGE FOR IKONIC PARKING BOLLARD Ø 200 mm H890mm
Flange to be fixed in concrete with stainless steel screws for fixing in the ground.
S.4219
FLANGE FOR IKONIC SAFETY BOLLARD Ø 200 mm H890mm e H2415mm
Resistant to vehicle impact of 3500Kg up to max speed of 50km/h. Steel flange h 500mm to be cemented in ground. Rooted 500mm into reinforced concrete plinth 1200x1200x1000mm (the flange must be welded to the plinth’s rebar).
Ø 150
1200×1200 H1000
403
500 500
890

404

Tonight
Bollard
Tonight is a bollard with an essential design particularly suitable for more urban project applications. It is characterised by a very slim pole head where the glass is positioned horizontally to protect the optical group that is totally hidden from sight.
The opal prismatic glass results in a very uniform light distribution, whilst the milled diffuser absorbs any stray light to reduce glare and assure good visual comfort. Tonight has been developed in two variants, 180° and 360° light distribution.
www.simes.it/tonight 405

TONIGHT Bollard
Extruded EN AW-6060 aluminium profile, Die-cast EN AB-47100 aluminium housing with high corrosion resistance.
Micro etched prismatic glass diffuser. Stainless steel screws.
Pre-wired luminaire with neoprene cable and connector.
Protection class
IP65
Isolation class
CLASS II q Mechanical resistance
IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
PATENT PENDING REGISTERED DESIGN
Ø 150
S.4219
FLANGE FOR SAFETY BOLLARD Suitable for TONIGHT.
Resistant to vehicle impact of 3500Kg up to max speed of 50km/h. Steel flange h 500mm to be cemented in ground. Rooted 500mm into reinforced concrete plinth 1200x1200x1000mm (the flange must be welded to the plinth’s rebar).
S.5506
4 way connector for through wiring (in/out)
Silicone gaskets.
Double powder paint.
406
Colour:
Anthracite grey
(code 24)
1200×1200 H1000
500 500

TONIGHT
180°
Ø 200
S.2110W
MID-POWER LED 3000K CRI90 1120lm Rated luminaire luminous flux 220lm Rated input power 10W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
S.4171
FLANGE FOR TONIGHT Ø 200mm
Flange to be fixed in concrete with stainless steel screws for fixing in the ground.
360°
Ø 200
S.2111W
MID-POWER LED 3000K CRI90 3360lm Rated luminaire luminous flux 660lm Rated input power 30W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
S.4171
FLANGE FOR TONIGHT Ø 200mm
Flange to be fixed in concrete with stainless steel screws for fixing in the ground.
407
800 800

408
Queen Mary’s School Of Dentistry And Medicine, Whitechapel, London, United kingdom © Concord by Havells Sylvania

Column
Bollard
COLUMN is characterised by solid build quality and a uniform light distribution; it is suitable for the illumination of urban and residential areas, as well as for car parks and walkways. The range includes several dimensions, versions and lighting configurations.
www.simes.it/column 409

COLUMN Bollard
Extruded EN AW-6060 aluminium profile, Die-cast EN AB-47100 aluminium housing with high corrosion resistance.
Reflectors in aluminized polycarbonate (Minicolumn).
Clear polycarbonate lens with controlled downward light emission for avoiding any glare (Column). Polycarbonate vandalproof diffuser. Stainless steel screws.
Pre-wired luminaire with neoprene cable and connector.
Silicone gaskets.
Double powder paint.
Colour:
Parish of S.S. Redentore, Seriate (Bergamo), Italy – Arch. Mario Botta © Giannattilio Valli
Ø 150
Protection class
IP65
Isolation class
CLASS II q Mechanical resistance
IK 10
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to
www.simes.it
S.4219
410
Aluminium grey
(code 14)
FLANGE FOR SAFETY BOLLARD
Suitable for COLUMN Ø 200mm H950mm S.4163W and S.4167W.
Resistant to vehicle impact of 3500Kg up to max speed of 50km/h. Steel flange h 500mm to be cemented in ground. Rooted 500mm into reinforced concrete plinth 1200x1200x1000mm (the flange must be welded to the plinth’s rebar).
S.5506
4 way connector for through wiring (in/out).
1200×1200 H1000
500 500

MINICOLUMN ø 140 mm H 360 mm
Ø 140
S.4130W
1 COB LED 3000K CRI90 1075lm
Rated luminaire luminous flux 394lm
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable
S.4172
FLANGE FOR MINICOLUMN
Ø 140 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
S.4131W
1 COB LED 3000K CRI90 1075lm
Rated luminaire luminous flux 394lm
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable
S.4172
FLANGE FOR MINICOLUMN
Ø 140 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
S.4135W
1 COB LED 3000K CRI90 1075lm
Rated luminaire luminous flux 134lm
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable
S.4172
FLANGE FOR MINICOLUMN
Ø 140 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
S.4136W
1 COB LED 3000K CRI90 1075lm
Rated luminaire luminous flux 134lm
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable
S.4172
FLANGE FOR MINICOLUMN
Ø 140 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
H 800 mm
lux
H 360 mm
Ø 140
Ø 140
lux
H 800 mm
lux
Ø 140
lux
411
800 360 800 360

COLUMN ø 200 mm H 470 mm
Ø 200
S.4153W
1 COB LED 3000K CRI90 3674lm
Rated luminaire luminous flux 1845lm Rated input power 37W
220V-240V AC 50/60Hz / DC Not Dimmable
S.4171
FLANGE FOR COLUMN
Ø 195 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
S.4163W
1 COB LED 3000K CRI90 3674lm
Rated luminaire luminous flux 1845lm Rated input power 37W
220V-240V AC 50/60Hz / DC Not Dimmable
S.4171
FLANGE FOR COLUMN
Ø 195 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
S.4157W
1 COB LED 3000K CRI90 3674lm
Rated luminaire luminous flux 832lm
Rated input power 37W
220V-240V AC 50/60Hz / DC Not Dimmable
S.4171
FLANGE FOR COLUMN
Ø 195 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
S.4167W
1 COB LED 3000K CRI90 3674lm
Rated luminaire luminous flux 832lm
Rated input power 37W
220V-240V AC 50/60Hz / DC Not Dimmable
S.4171
FLANGE FOR COLUMN
Ø 195 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
H 950 mm
H 470 mm
Ø 200
Ø 200
H 950 mm
412
Ø 200
lux
lux
lux
lux
950 470 950 470

413

414
Lovato electric headquarter, Gorle, (Bergamo), Italy © ph. Gianattilio Valli

Cubiks
Bollard
CUBIKS is a range of bollards with a minimalistic and clean-cut design, suitable for the illumination of areas in modern urban context. CUBIKS is totally glare-free and provides extremely uniform light distribution on the ground. The clean, essential design of this bollard makes its installation perfect in high profile architectural projects.
www.simes.it/cubiks 415

CUBIKS Bollard
Die-cast EN AB-47100 and extruded EN AW-6060 aluminium housing with high corrosion resistance.
Reflector in polymers covered with 99.98% pure aluminium (Cubiks and Megacubiks).
Clear polycarbonate reeded diffuser. Stainless steel screws.
Pre-wired luminaire with neoprene cable and connector.
Protection class
IP65 MINICUBIKS
IP66 CUBIKS and MEGACUBIKS
Isolation class
CLASS II q
Mechanical resistance of glass
IK 10
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
S.5506
4 way connector for through wiring (in/out).
416
Silicone gaskets.
Double powder paint.
Colour:
Aluminium grey
(code 14)

MINICUBIKS
H 550 mm
120 x 120
S.5314W
4 HIGH-POWER LEDs 3000K CRI90 760lm Rated luminaire luminous flux 127lm
Rated input power 11W
220V-240V AC 50/60Hz / DC Not Dimmable
S.6309
FLANGE ACCESSORY FOR MINICUBIKS
Ø 120 mm flange to be buried in concrete with stainless steel screws for fixing in the ground.
CUBIKS
H 350 mm
Ø 120
H 800 mm
180 x 180
S.5334W
4 COB LEDs 3000K CRI90 4500lm
Rated luminaire luminous flux 1530lm Rated input power 40W
220V-240V AC 50/60Hz / DC Not Dimmable
S.5339W
4 COB LEDs 3000K CRI90 4500lm
Rated luminaire luminous flux 1530lm Rated input power 40W
220V-240V AC 50/60Hz / DC Not Dimmable
S.5310
FLANGE ACCESSORY FOR CUBIKS
Ø 180 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
lux
180 x 180
Ø 180
lux
417
800 350
550

MEGACUBIKS
H 450 mm
H 950 mm
240 x 240
S.5374W
4 COB LEDs 3000K CRI90 5900lm
Rated luminaire luminous flux 2120lm Rated input power 55W
220V-240V AC 50/60Hz / DC Not Dimmable
418
240 x 240
Ø 240
S.5379W
4 COB LEDs 3000K CRI90 5900lm
Rated luminaire luminous flux 2120lm Rated input power 55W
220V-240V AC 50/60Hz / DC Not Dimmable
S.5350
FLANGE ACCESSORY FOR MEGACUBIKS
Ø 240 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
lux
lux
950 450

419
Volgy, Hungary © ph. Tamas Bujnovszky / Be Light

420
Velux atika demo-house, Fiera Milano, Italy © ph. Gianattilio Valli

Moai
Bollard
MOAI is a bollard with a strong personality and design. The smooth reflective surface guarantees an optimum light distribution. Its solid structure and robustness make it suitable for the installation in urban environment.
www.simes.it/moai 421

MOAI Bollard
Die-cast EN AB-47100 and extruded EN AW-6060 aluminium housing with high corrosion resistance.
Stainless steel screws.
99.98% pure aluminium reflectors. Clear toughened reeded glass. Pre-wired luminaire with neoprene cable and connector.
Silicone gaskets.
Double powder paint.
Colours:
Aluminium grey (code .14) Burnished bronze (code 20)
Protection class
IP65
Isolation class
CLASS I y Mechanical resistance
IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
Ystad bathing pier, Sweden © Fagerhult Belysning AB
S.6159
ANTIGLARE SHIELD
for MINI MOAI
S.6169
ANTIGLARE SHIELD
for MOAI
S.5506
4 way connector for through wiring (in/out).
422

MINIMOAI
H 800 mm
S.6150W
1 COB LED 3000K CRI90 1565lm
Rated luminaire luminous flux 584lm
Rated input power 16,5W
220V-240V AC 50/60Hz / DC Not Dimmable
MOAI
H 1150 mm
120 120
Ø 120
S.6309
FLANGE ACCESSORY FOR MINIMOAI
Ø 120 mm flange to be buried in concrete with stainless steel screws for fixing in the ground.
S.6160W
1 COB LED 3000K CRI90 3763lm Rated luminaire luminous flux 1375lm Rated input power 34,4W
220V-240V AC 50/60Hz Not Dimmable
180
180
Ø 180
S.5310
FLANGE ACCESSORY FOR MOAI
Ø 180 mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
423
1150
800

Urban lighting
Tomorrow 426 Pole Top
Cigarette 430 Stelo 436 Park 440
Pole mounted projectors
Keen 22 Stage round 30 Stage 42 Twist 52
424

Avenue 446 Slot pole 450 Poster 454 Minislot disk 458
Movit 58 Outline 66 Focus tower 72 Smooth 342
425

426

Tomorrow
Pole top
Tomorrow is specifically developed for pedestrian areas and perfect for landscape areas as it can blend into hedges, bushes and flowerbeds. It comes with a Mid-power LED with extaordinary uniform light distribution at ground level, providing perfect homogeneous lighting without any shadows cast.
Tomorrow Pole top has been thought of as a retrofit solution onto existing poles and to substitute obsolete pole tops. This version can be installed onto poles of 60 mm in diam and is available in Mid-power LED for a more comfortable and soft distribution.
www.simes.it/tomorrow 427

TOMORROW
Extruded EN AW-6060 aluminium profile, Die-cast EN AB-47100 aluminium housing with high corrosion resistance.
Micro etched prismatic glass diffuser. Stainless steel screws.
Pre-wired luminaire with neoprene cable and connector.
Pole top
Protection class
IP65
Isolation class
CLASS II q Mechanical resistance
IK 06
Leds 4000K CRI90 versions are available on request.
For the latest technical information and product updates with LED technology please refer to the website (www.simes.it)
REGISTERED DESIGN
S.2499
SURGE PROTECTION DEVICE 10kV
Surge protection devices are utilised to limit the damage of such electrical disturbances (temporary, transitional or permanent). Each fixture must be connected to one single device at a distance of no more than 10m away.
428
Silicone gaskets.
Double powder paint.
Colour:
Anthracite grey
(code 24)

TOMORROW POLE TOP
ø 60 mm attachment
200
60
Tomorrow Post top
S.2131W
MID-POWER LED 3000K CRI90 3360lm Rated luminaire luminous flux 2033lm Rated input power 30W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
Luminous flux wasted upward 0%.
Pole not included
S.2800
S.2801
H=
3.5 m
Poles for Tomorrow
S.2800
Ø 60 mm CYLINDRICAL POLE TO BE BURIED
Pole total height 3000 mm
To be buried for 500 mm
Finished luminaire total height above ground 2550 mm
S.2801
Ø 60 mm CYLINDRICAL POLE WITH BASE
Pole total height 2500 mm
Finished luminaire total height above ground 2550 mm
lux
60 60
429
500 2500 50
50
2500 50

430

Cigarette
Urban lighting
Cigarette is a pole luminaire specifically developed for urban applications that comes from the union of an extruded aluminium pole and a polycarbonate diffuser. The combination of the two materials confer an extremely clean and essential design to this pole. With vertical diffused distribution, Cigarette is suitable for creating ambient lighting effects particularly appropriate in urban and landscape applications. The polycarbonate diffuser is UV and impact resistant and guarantees an even light distribution throughout its complete length. A modular fixture based on two different aluminium extrusions and two types of polycarbonate diffusers provide different aesthetical and performance solutions.
www.simes.it/cigarette 431

CIGARETTE Urban lighting
Extruded EN AW-6060 aluminium profile, Die-cast EN AB-47100 aluminium housing with high corrosion resistance.
Opal polycarbonate diffuser with UV-ray treatment.
Stainless steel screws.
Pre-wired luminaire with neoprene cable and connector.
Protection class
IP65
Isolation class
CLASS II q
Mechanical resistance of glass
IK 10
Leds 4000K CRI90 versions are available on request.
For the latest technical information and product updates with LED technology please refer to the official website (www.simes.it)
REGISTERED DESIGN
S.5506
4 way connector for through wiring (in/out)
S.2499
SURGE PROTECTION DEVICE 10kV Surge protection devices are utilised to limit the damage of such electrical disturbances (temporary, transitional or permanent). Each fixture must be connected to one single device at a distance of no more than 10m away.
S.2009
FLANGE for CIGARETTE
Ø 150mm h 600mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
Silicone gaskets.
Double powder paint.
432
Colour:
Anthracite grey
(code 24)

CIGARETTE
S.2002W
S.2003W
S.2012W
S.2013W
S.2002W H 2,0m
MID-POWER LED 3000K CRI90 5400lm Rated luminaire luminous flux 2475lm Rated input power 75W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
S.2003W H 2,5m
MID-POWER LED 3000K CRI90 7200lm Rated luminaire luminous flux 3300lm Rated input power 100W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
S.2012W H 3,5m
MID-POWER LED 3000K CRI90 5400lm Rated luminaire luminous flux 2475lm Rated input power 75W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
S.2013W H 4,0m
MID-POWER LED 3000K CRI90 7200lm Rated luminaire luminous flux 3300lm Rated input power 100W
220V-240V AC 50/60Hz / DC Not Dimmable Computer-simulated photometrics
Ø 150
Ø 150
Ø 150
Ø 150
433
500
1500
500
2000
2000
1500
2000
2000

434

435

436
Yas Mall, Yas Island, Abu Dhabi, UAE © Cinmar Lighting Systems

Stelo
Urban lighting
Available with LED neutral white, STELO is an elegant tall bollard specifically suitable for pedestrian areas, town centres and parks. Its beam assures glare-free illumination and maximizes the interdistance between each bollard.
www.simes.it/stelo 437

STELO Urban lighting
Extruded EN AW-6060 aluminium profile, Die-cast EN AB-47100 aluminium housing with high corrosion resistance.
Transparent polycarbonate diffuser (opal diffuser on request).
Stainless steel screws.
Luminaire suitable for double cable glands and connection box with fuses. Inspection door perfectly flush with the pole surface.
Protection class
IP65
Isolation class
CLASS II q
Mechanical resistance of glass
IK 10
Leds 3000K CRI90 versions are available on request.
Integral ballast to allow an automatic power and flux reduction without the need of any external control systems available on request with surcharge.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
S.4129
FLANGE ACCESSORY
Ø 195mm h 800mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
S.4128
FIXING BASE
Base 300x300mm Spacing 200x200mm Holes for M16
S.2499
SURGE PROTECTION DEVICE 10kV
Surge protection devices are utilised to limit the damage of such electrical disturbances (temporary, transitional or permanent). Each fixture must be connected to one single device at a distance of no more than 10m away.
Silicone gaskets.
Double powder paint.
Colours:
Aluminium grey Anthracite grey
300
Public place, Piazza Aldo Moro, Mola di Bari, Italy – Architects Michele Sgobba and Imma Resta © Agenzia Italamona, ph. Angelo Stanisci
438
(code 14) (code 24)

STELO
Transparent polycarbonate diffuser
Ø 200
S.4120N
1 COB LED 4000K CRI90 6060lm
Rated luminaire luminous flux 4010lm Rated input power 56W
220V-240V AC 50/60Hz / DC Not Dimmable
Version with opal polycarbonate diffuser on demand.
NOTE: the light distribution will be modified
15 12 9 6 3 0 3 6 9 12
439
12 9 6 3
3500

440

Park
Urban lighting
A simple signpost, with right angles lit by elegant junctions, a discrete item of street furniture suitable for any landscape or architectural context. PARK is a high energy- saving fitting perfect to light up parking lots, streets, bicycle and pedestrian paths.
www.simes.it/park 441

BMW Milan City Sales Outlet Via De Amicis, Milano, Italy / General contractor: ISG Italia © Ph. Barbara Corsico
PARK Urban lighting
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Rectangular extruded aluminum pole with inspection door.
Steel zinc-plated mounting flange with stainless steel screws.
Clear toughened glass 5 mm thick. Stainless steel screws.
Luminaire hard wired with single neoprene cable with cable gland.
Inspection door perfectly flush with the pole surface.
Electrical wiring with fast connector. Controlgear equipped with protections against discharges and high voltage spikes on the mains: 6kV differential mode (L-N), 8kV common mode (PE).
Silicone gaskets.
Double powder paint.
Protection class
IP65
Isolation class
CLASS II q Mechanical resistance
IK 09
Leds 3000K CRI80 versions are available on request.
Integral ballast to allow an automatic power and flux reduction without the need of any external control systems available on request with surcharge.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
300
Ø 102 / Ø 120
Ø 440
S.7109
FLANGE ACCESSORY FOR PARK RECTANGULAR POLE
100x150mm h 820mm flange to be fixed in concrete with stainless steel screws for fixing in the ground.
S.7108
FIXING BASE FOR PARK RECTANGULAR POLE Base 300x300mm Spacing 200x200mm Holes for M16
S.2809.14
POLE BASE COVER
For pole with base and pole to be buried Ø102mm or Ø121mm. Die-cast aluminium housing.
ON REQUEST ADAPTOR
for cylindrical poles Ø 60mm for S.2809 POLE BASE COVER
S.2499
SURGE PROTECTION DEVICE 10kV
Surge protection devices are utilised to limit the damage of such electrical disturbances (temporary, transitional or permanent). Each fixture must be connected to one single device at a distance of no more than 10m away.
442
Colours:
Aluminium grey Anthracite grey
(code 14) (code 24)
190

PARK WALL MOUNTED
Wall mounted 20 Leds
100 440 150
S.7130N
20 HIGH-POWER LEDs 4000K CRI70 6000lm Rated luminaire luminous flux 4308lm
Rated input power 46W
220V-240V AC 50/60Hz / DC Not Dimmable
With steet optic
Luminous flux wasted upward 0%.
Wall mounted 36 Leds
100 600 150
S.7150N
36 HIGH-POWER LEDs 4000K CRI70 10800lm Rated luminaire luminous flux 7341lm
Rated input power 80W
220V-240V AC 50/60Hz / DC Not Dimmable
With street optic
Luminous flux wasted upward 0%.
H=
3,5m
lux
H=
6,0m
lux
443
100
100

PARK RECTANGULAR POLE
Double rectangular pole 2×20 Leds
Double rectangular pole
S.7110N
2×20 HIGH-POWER LEDs 4000K CRI70 6000lm Rated luminaire luminous flux 8616lm
Rated input power 92W
220V-240V AC 50/60Hz / DC Not Dimmable
With steet optic
Luminous flux wasted upward 0%. Rectangular extruded aluminum pole (h 3500 mm) included.
Single rectangular pole
S.7100N
20 HIGH-POWER LEDs 4000K CRI70 6000lm Rated luminaire luminous flux 4308lm
Rated input power 46W
220V-240V AC 50/60Hz / DC Not Dimmable
Single rectangular pole 20 Leds
lux
With steet optic
Luminous flux wasted upward 0%. Rectangular extruded aluminum pole (h 3500 mm) included.
100 440
440 100 440
H=
3,5m
lux
444
3500
3500
100 150
100 150

PARK POST TOP ø 76mm attachment Double Post top 2×36 leds (use 2xS.7140N)
Single post top ø 76mm
S.7140N Park 36 leds
36 HIGH-POWER LEDs 4000K CRI70 10800lm Rated luminaire luminous flux 7341lm
Rated input power 80W
220V-240V AC 50/60Hz / DC Not Dimmable
With street optic
Luminous flux wasted upward 0%.
Pole not included
Suitable for cylindrical poles
H 5500 mm ÷ 8000 mm with spigot Ø 76mm
Single post top ø 76mm
S.7120N Park 20 leds
20 HIGH-POWER LEDs 4000K CRI70 6000lm Rated luminaire luminous flux 4308lm
Rated input power 46W
220V-240V AC 50/60Hz / DC Not Dimmable
With steet optic
Luminous flux wasted upward 0%.
Pole not included
Suitable for cylindrical poles
H 3500 mm ÷ 6000 mm with spigot Ø 76mm
Single Post top 20 leds
S.2818.14
S.2816.14
Poles
S.2818.14 Pole h 7350 mm
Ø 102 mm CYLINDRICAL POLE
TO BE BURIED with Ø 76 mm SPIGOT Pole total height 7350 mm
To be buried for 800 mm
Finished luminaire total height 6580 mm
S.2816.14 Pole h 5770 mm
Ø 102 mm CYLINDRICAL POLE
TO BE BURIED with Ø 76 mm SPIGOT Pole total height 5770 mm
To be buried for 500 mm
Finished luminaire total height 5300 mm
i 76 600
H=
6,0m
lux
i 76 440
76
H=
3,5m
lux
76
102
102
445
800 6440 7350
110
500 5160 110 5770
140
100 150
100 150
140

446

Avenue
Urban lighting
The first SIMES street lighting pole top. Essential in its forms and with a clean cut design the AVENUE is a fixture designed with an aluminium die cast housing that contains the latest state of the art LED technology. The compact size and reduced thickness of AVENUE give an elegant solution to what is usually a complex luminaire design issue. The innovative pole bracket allows for AVENUE to be positioned at any height and to adapt to different pole diameters. The advanced engineering of the optics place AVENUE at the top end of its category with an inter distance of 4 times the height of the pole.
(Lighting category ME4A- Service roads and roads outside urban areas).
www.simes.it/avenue 447

AVENUE Cycle lane and street lighting
Ø 102
S.2814
CYLINDRICAL POLE Ø 102 mm TO BE BURIED for AVENUE cycle lane/pedestrian lighting Pole total height 5000 mm
To be buried for 500 mm
S.2815
CYLINDRICAL POLE Ø 102 mm
TO BE BURIED for AVENUE Street lighting Pole total height 7240 mm
To be buried for 800 mm
S.2817
CYLINDRICAL SHAPED POLE
Ø 168 mm / Ø 102 mm TO BE BURIED for AVENUE Street lighting
Pole total height 9300 mm
S.2809.24
POLE BASE COVER
For pole with base and pole to be buried Ø102mm or Ø120mm. Die-cast aluminium housing.
S.2499
SURGE PROTECTION DEVICE 10kV
Surge protection devices are utilised to limit the damage of such electrical disturbances (temporary, transitional or permanent). Each fixture must be connected to one single device at a distance of no more than 10m away.
Rome American Cemetery and Memorial, Nettuno, Italy © ph. Daniele Fratangeli
Die-cast EN AB-47100 aluminium housing, extruded EN AW-6060 aluminium structure with high corrosion resistance.
Clear toughened glass 5 mm thick. Stainless steel screws.
Luminaire hard wired with single neoprene cable with cable gland.
On request with surcharge ballast to allow an automatic power and flux reduction without the need of any external control systems.
Ø 102
Silicone gaskets.
Double powder paint. Protection class
IP66
Isolation class
CLASSE II q Mechanical resistance
IK 07
PATENT PENDING Colour:
Anthracite grey
Ø 102 / Ø 120
Ø 440
Ø 102
448
(code 24)
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
S.2814
S.2815 S.2817
Ø 168
500
4500
800
6440
800
8500
190

AVENUE ø 102 mm attachment Street lighting 1000 mm
Luminaires ø 102mm
S.3090N
36 HIGH-POWER LEDs 4000K CRI70 12615lm Rated luminaire luminous flux 9976lm
Rated input power 107W
220V-240V AC 50/60Hz / DC Not Dimmable
Luminous flux wasted upward 0%.
Available on request for Ø76mm cylindrical pole Pole not included
Example with S.3090N used on road category ME4a Installation H = 8,0m, road width 8,0m
Spacing 34m (34m / 8m = 4.2)
S.3091N
24 HIGH-POWER LEDs 4000K CRI70 8900lm Rated luminaire luminous flux 6364lm
Rated input power 73W
220V-240V AC 50/60Hz / DC Not Dimmable
Luminous flux wasted upward 0%.
Available on request for Ø76mm cylindrical pole Pole not included
Example with S.3091N used on road category ME4b Installation H = 6,0m, road width 6,0m
Spacing 27m (27m / 6m = 4.5)
S.3095N
12 HIGH-POWER LEDs 4000K CRI70 2100lm Rated luminaire luminous flux 1506lm
Rated input power 15W
220V-240V AC 50/60Hz / DC Not Dimmable
Luminous flux wasted upward 0%.
Available on request for Ø76mm cylindrical pole Pole not included
Example with S.3095N used on road category S3 Installation H = 4,0m, road width 3,0m
Spacing 17m (17m / 4m = 4.2)
1030
Ø102
Street lighting 800 mm
795
Ø102
0° or 5°
H
= 8,0m
20 15 10 5
25 20 15 10 5 0 5 10 15 20 (m)
lux
0° or 5°
H
= 6,0m
20 15 10 5
25 20 15 10 5 0 5 10 15 20 (m)
lux
Cycle lane/pedestrian lighting 645 mm
645
Ø102
0° or 5°
H
= 4,0m
25 20 15 10 5 0 5 10 15 20 (m)
lux
20 15 10 5
449
230 65
100 100 100
230 65
230 65

450
Nuovo Teatro dell’Opera, Florence, Italy – ABDR Architetti Associati / Massimiliano Baldieri © Luigi Filetici

Slot pole
Urban lighting
SLOT POLE is a minimalist pole-top luminaire for urban illumination and direct refletor. Its asymmetric optic is directed downwards allowing optimum light distribution.
www.simes.it/slot-pole 451

SLOT POLE Urban lighting
Nuovo Teatro dell’Opera, Florence, Italy – ABDR Architetti Associati / Massimiliano Baldieri © Luigi Filetici
Ø 102 / Ø 120
Ø 440
Die-cast EN AB-47100 and extruded EN AW-6060 aluminium housing with high corrosion resistance.
Clear toughened glass 8 mm thick. Post top luminaire with Ø 76 mm spigot attachment.
Stainless steel screws.
Luminaire hard wired with single neoprene cable with cable gland. Controlgear equipped with protections against discharges and high voltage spikes on the mains: 6kV differential mode (L-N), 8kV common mode (PE). Silicone gaskets.
Double powder paint.
Colour:
Aluminium grey (code 14)
Protection class
IP65
Isolation class
CLASS II q Mechanical resistance
IK 09
Integral ballast to allow an automatic power and flux reduction without the need of any external control systems available on request with surcharge.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
S.2809.14
POLE BASE COVER
For pole with base and pole to be buried Ø102mm or Ø120mm. Die-cast aluminium housing.
S.2499
SURGE PROTECTION DEVICE 10kV Surge protection devices are utilised to limit the damage of such electrical disturbances (temporary, transitional or permanent). Each fixture must be connected to one single device at a distance of no more than 10m away.
452
190

SLOT POLE TOP ø 76 mm attachment Double post top
Double post top ø 76mm
S.3976N
2×18 HIGH-POWER LEDs 4000K CRI70 5400lm Rated luminaire luminous flux 5240lm
Rated input power 83W
220V-240V AC 50/60Hz / DC Not Dimmable
With street optics
Luminous flux wasted upward 0% Pole not included
Single post top
H=
5.7 m
lux
472
Øi 76 Ø 102
Single post top ø 76mm
S.3973N
18 HIGH-POWER LEDs 4000K CRI70 5400lm Rated luminaire luminous flux 2620lm
Rated input power 41,5W
220V-240V AC 50/60Hz / DC Not Dimmable
With street optics
Luminous flux wasted upward 0% Pole not included
H=
5.7 m
lux
102 102
S.2816.14 S.2811.14
Poles
S.2816.14
Ø 102 mm CYLINDRICAL POLE TO BE BURIED with Ø 76 mm SPIGOT
Pole total height 5770 mm
To be buried for 500 mm
Finished luminaire total height above ground 5710 mm
S.2811.14
Ø 102 mm CYLINDRICAL POLE TO BE BURIED with Ø 76 mm SPIGOT
Pole total height 4770 mm
To be buried for 500 mm
Finished luminaire total height above ground 4710 mm
453
500 5160
500 4160
110
550
110
550
Ø 250 550

454

Poster
Urban lighting
A new concept of area lighting with essential and clean shapes: this is Poster, the perfect solution to light up your landscape in a stylish and elegant way. The sophisticated die cast aluminium structure with low copper content contrasts effectively the oxidation process and makes Poster a lighting system that is not only minimal and dynamic but also perfectly functional and resistant.
Ø 76 mm
Ø 60 mm
www.simes.it/poster 455

POSTER Urban lighting
Worklife Innovation Hub, Casalecchio di Reno, Bologna, Italy – Open Project © Ph. Diego De Pol
S.7049
ASYMMETRIC SHIELD
Aluminium shield to be mounted when an asymmetric light distribution is required from the MINIPOSTER pole top.
S.7059
ASYMMETRIC SHIELD
Aluminium shield to be mounted when an asymmetric light distribution is required from the POSTER pole top.
S.2849
PLANTED ROOT FOR Ø 60 mm
AND Ø 76 mm CYLINDRICAL POLE WITH BASE
h=470mm and bolts in galvanized steel with M16 threads.
S.2499
SURGE PROTECTION DEVICE 10kV
Surge protection devices are utilised to limit the damage of such electrical disturbances (temporary, transitional or permanent). Each fixture must be connected to one single device at a distance of no more than 10m away.
Die-cast EN AB-47100 aluminium housing with high corrosion resistance. Clear toughened glass 6 mm thick. Stainless steel screws.
Luminaire suitable for single cable gland.
Silicone gaskets.
Double powder paint.
Protection class
IP65
Isolation class
CLASS II q Mechanical resistance
IK 07
Leds 3000K CRI80 versions are available on request.
Integral ballast to allow an automatic power and flux reduction without the need of any external control systems (Poster) available on request with surcharge.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
REGISTERED DESIGN
Colours:
Aluminium grey Anthracite grey
(code 14) (code 24)
456

POSTER POLE TOP ø 60 mm or ø 76 mm attachment
Poster Post top ø 76 mm
Poster post top
S.7050N
MID-POWER LEDs 4000K CRI80 7680lm Rated luminaire luminous flux 4510lm Rated input power 63W
220V-240V AC 50/60Hz / DC Not Dimmable Pole not included
Poles for Poster
S.2812
Ø 76 mm CYLINDRICAL POLE TO BE BURIED
Pole total height 3500 mm
To be buried for 500 mm
Finished luminaire total height above ground 3860 mm Provided with inspection door
S.2813
Ø 76 mm CYLINDRICAL POLE WITH BASE
Pole total height 3000 mm
Finished luminaire total height above ground 3860 mm Provided with inspection door
Miniposter Post top ø 60 mm
S.7045N
MID-POWER LEDs 4000K CRI80 3360lm Rated luminaire luminous flux 1721lm Rated input power 30W
220V-240V AC 50/60Hz Not Dimmable Pole not included
Poles for Miniposter
S.2800
Ø 60 mm CYLINDRICAL POLE TO BE BURIED
Pole total height 3000 mm
To be buried for 500 mm
Finished luminaire total height above ground 3065 mm
S.2801
Ø 60 mm CYLINDRICAL POLE WITH BASE
Pole total height 2500 mm
Finished luminaire total height above ground 3065 mm
36
Øi 76
850
Øi 76
Miniposter post top
S.2812
S.2813
76 76
S.2800
S.2801
36
Øi 60
550
Øi 60
H=
H=
3.0 m
2.5 m
lux
lux
60 60
457
500 2500 565
500 3000 860
2500 565
3000 860
565
860

458

Minislot disk
Urban lighting
MINISLOT DISK is a post top luminaire with indirect light beam that emits a very uniform light distribution at 360°. Glare-free effects with excellent visual comfort and with louvre are its main features. MINISLOT DISK blends in different architectural styles, from classic to modern, thanks to its clean design.
www.simes.it/minislot-disk 459

MINISLOT DISK Urban lighting
Die-cast EN AB-47100 and extruded EN AW-6060 aluminium housing with high corrosion resistance.
Reflector in polymers covered with 99.98% pure aluminium.
Clear toughened glass 8 mm thick. Stainless steel screws.
Luminaire hard wired with single neoprene cable with cable gland. Silicone gaskets.
Double powder paint.
POLE CONNECTION:
Pole head in painted aluminium with Ø 120 mm connection.
DIFFUSER:
Diffuser with involute omnidirectional distribution for indirect light in fibre glass.
Protection class
IP65
Isolation class
CLASS II q Mechanical resistance
IK 08
Leds 3000K CRI90 versions are available on request.
Integral ballast to allow an automatic power and flux reduction without the need of any external control systems available on request with surcharge.
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it
Ø 102 / Ø 120
Ø 440
S.2809
POLE BASE COVER
For pole with base and pole to be buried Ø102mm or Ø120mm. Die-cast aluminium housing.
S.2840
PLANTED ROOT for pole S.2846
h = 470 mm and bolts in galvanized steel with M16 threads.
S.2499
SURGE PROTECTION DEVICE 10kV
Surge protection devices are utilised to limit the damage of such electrical disturbances (temporary, transitional or permanent). Each fixture must be connected to one single device at a distance of no more than 10m away.
Palace music hall, Thessaloniki, Greece © Gravani Lighting
460
Colours:
Aluminium grey Anthracite grey
(code 14) (code 24)
190

MINISLOT DISK POLE TOP ø 120 mm attachment
Post top
Post top with louvre
Post top ø 120 mm
S.3994N
1 COB LED 4000K CRI90 5800lm
Rated luminaire luminous flux 2720lm Rated input power 50W
220V-240V AC 50/60Hz / DC Not Dimmable Pole not included
Ø 880
Ø 120
Post top ø 120 mm with louvre
S.3993N
1 COB LED 4000K CRI90 5800lm
Rated luminaire luminous flux 2518lm Rated input power 50W
220V-240V AC 50/60Hz / DC Not Dimmable Pole not included
Ø 880
Ø 120
Ø 120
Ø 120
880
880
S.2846
S.2826
250
Poles
S.2846
Ø 120 mm CYLINDRICAL POLE WITH BASE
Pole total height 4200mm
Finished luminaire total height above ground 4950mm
S.2826
Ø 120 mm CYLINDRICAL POLE TO BE BURIED
Pole total height 4800mm
To be buried for 600mm
Finished luminaire total height above ground 4950mm
461
600
4200
4200
4080
870
870
855
855

462

Pool
Submersion
POOL is a high performance submersion luminaire designed specifically for swimming pools and freshwater. Available in three dimensions, it is equipped with LED light sources, monochromatic and RGBW, for emotion and charm underwater.
www.simes.it/pool 463

POOL Submersion Technopolymer housing.
Marine grade stainless steel AISI 316L front trim 2mm thick.
Toughened glass diffuser
10mm thick for Micropool,
12mm thick for Minipool,
12mm thick for Pool,
4mm thick for Micropool Spot, 8mm thick for Minipool Spot,
8mm thick for Pool Spot. Luminaire hard wired with single neoprene for submersion cable with cable gland.
Stainless steel screws.
Recessing box in technopolymer with front ring in stainless steel AISI 316L. Corrugated plastic pipe 5m long for Micropool and Minipool,
7m long for Pool.
Silicone gaskets.
Panorama conference hotel, Bergen, Norway, Arch. Lasse Nøstvold © ph. Erik Borkner / Fagerhult AS
S.3671
FLANGE for MICROPOOL and
MINIPOOL SPOT
Fixation base plate for Micro- and Minipool Spot installation. Weight of the flange: Kg 1,5
S.3672
FLANGE for POOL SPOT Fixation base plate for
Pool Spot installation. Weight of the flange: Kg 3,5
464
Finishing:
Stainless steel
(code .19)
Protection class
IP68 3m
Isolation class
CLASS III  Mechanical resistance
IK 10
Power supply not included.
Not suitable for submersion in sea water.
Suitable for swimming pools in concrete and metal, recessed to the wall and on the bottom.
REGISTERED DESIGN
For the latest technical information and luminaire updates with LED technology please refer to www.simes.it

POOL
Micropool
165 10 190
Minipool
S.3607.19
1 HIGH-POWER LED 6000K CRI70 285lm Rated luminaire luminous flux 140lm
Rated input power 2,5W 24V DIMMABLE Requires constant voltage remote power supply (page 469) *
S.3603.19
HIGH-POWER LEDs RGBW
Rated input power 5W 24V PWM DIMMABLE Requires constant voltage PWM remote power supply (page 471)
S.3617.19
6 HIGH-POWER LEDs 6000K CRI70 1670lm Rated luminaire luminous flux 891lm
Rated input power 20W 24V NOT DIMMABLE Requires constant voltage remote power supply (page 468) *
S.3629.19
5 HIGH-POWER LEDs RGBW
Rated input power 14W 24V PWM DIMMABLE Requires constant voltage PWM remote power supply (page 471)
S.3627.19
12 HIGH-POWER LEDs 6000K CRI70 3340lm Rated luminaire luminous flux 1489lm
Rated input power 34W 24V NOT DIMMABLE Requires constant voltage remote power supply (page 468) *
S.3630.19
12 HIGH-POWER LEDs RGBW
Rated input power 31W 24V PWM DIMMABLE Requires constant voltage PWM remote power supply (page 471)
* MICROPOOL, MINIPOOL and POOL with cold white led work also with traditional systems 12V CA (proper to substitute existing lamps for swimming pool with magnetic transformer 230V/12V CA).
20°
H=
H=
0.1 m
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0.1 m
40°
H=
150 11
Pool
Ø 240
H=
35°
H=
165 10
Ø 320
H=
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0.1 m
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0.1 m
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0.1 m
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0.1 m
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
lux
lux
2.0 1.5 1.0 0.5
2.0 1.5 1.0 0.5
lux
lux
2.0 1.5 1.0 0.5
2.0 1.5 1.0 0.5
lux
2.0 1.5 1.0 0.5
lux
2.0 1.5 1.0 0.5
465
Ø 309
160
Ø 232
Ø 145

POOL SPOT
Micropool spot
Ø 95 145
Minipool spot
S.3676.19
1 HIGH-POWER LED 6000K CRI70 285lm Rated luminaire luminous flux 140lm
Rated input power 2,5W 24V DIMMABLE Requires constant voltage remote power supply (page 469) *
S.3673.19
HIGH-POWER LEDs RGBW
Rated input power 5W 24V PWM DIMMABLE Requires constant voltage PWM remote power supply (page 471)
S.3686.19
6 HIGH-POWER LEDs 6000K CRI70 1670lm Rated luminaire luminous flux 891lm
Rated input power 20W 24V NOT DIMMABLE Requires constant voltage remote power supply (page 468) *
S.3683.19
5 HIGH-POWER LEDs RGBW
Rated input power 14W 24V PWM DIMMABLE Requires constant voltage PWM remote power supply (page 471)
S.3696.19
12 HIGH-POWER LEDs 6000K CRI70 3340lm Rated luminaire luminous flux 1489lm
Rated input power 34W 24V NOT DIMMABLE Requires constant voltage remote power supply (page 468) *
S.3693.19
12 HIGH-POWER LEDs RGBW
Rated input power 31W 24V PWM DIMMABLE Requires constant voltage PWM remote power supply (page 471)
* MICROPOOL, MINIPOOL and POOL with cold white led work also with traditional systems 12V CA (proper to substitute existing lamps for swimming pool with magnetic transformer 230V/12V CA).
20°
H=
0.1 m
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
lux
2.0 1.5 1.0 0.5
H=
40°
H=
Ø 150 115
Pool spot
H=
35°
Ø 220 135
H=
0.1 m
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0.1 m
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0.1 m
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0.1 m
0.1 m
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
lux
lux
lux
2.0 1.5 1.0 0.5
2.0 1.5 1.0 0.5
2.0 1.5 1.0 0.5
H=
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
lux
2.0 1.5 1.0 0.5
lux
2.0 1.5 1.0 0.5
466
300
220
185

467
Aquardens, S.Lucia di Pescantina, Verona, Italy © Aquardens

REMOTE POWER SUPPLY NOT DIMMABLE 24V DC constant voltage
Required to run the following:
Standard fixtures in constant voltage in 24V
Variants in constant voltage 24V (available on request with surcharge)
(See numeric index from page 473)
IP20 Independent
S.3400
10W 230V/24V DC
IP20 CLASS II SELV
Dimensions 118mm x38mm x21,2mm
S.2430
16W 230V/24V DC
IP20 CLASS II SELV
Dimensions 110mm x50mm x20mm
S.2400
35W 230V/24V DC
IP20 CLASS II SELV
Dimensions 195mm x43mm x30,2mm
S.2401
60W 230V/24V DC
IP20 CLASS II SELV
Dimensions 225mm x43mm x29,8mm
S.2403
100W 230V/24V DC
IP20 CLASS II SELV
Dimensions 295mm x43mm x29,8mm
IP rated Box
S.3401
10W 230V/24V DC
IP55 CLASS II SELV
Dimensions 215mm x185mm x80mm
S.2435
16W 230V/24V DC
IP67 CLASS II SELV
Dimensions 175,5mm x86,5mm x43mm
S.2402
60W 230V/24V DC
IP55 CLASS II SELV
Dimensions 260mm x240mm x100mm
S.2404
90W 230V/24V DC
IP55 CLASS II SELV
Dimensions 260mm x240mm x100mm
IP rated Independent
S.3425
8W 230V/24V DC
It can be housed directly in the recessed box of MINISKILL round, square and vertical flush versions.
IP54 CLASS II SELV
Dimensions 54mm x32mm x21mm
S.2405
60W 230V/24V DC
IP67 CLASS II SELV
Dimensions 150mm x53mm x35mm
S.2406
90W 230V/24V DC
IP67 CLASS II SELV
Dimensions 171mm x63mm x37,5mm
IP Junction rated Box for POOL
S.3664
35W 230V/24V DC for:
Max N°4 Micropool LED (+N°2 S.3670) Max N°1 Minipool LED
Max N°1 Pool LED
IP65 CLASS II SELV
Dimensions 200mm x200mm x220mm
S.3665
90W 230V/24V DC for:
Max N°5 Micropool LED (+N°3 S.3670) Max N°4 Minipool LED (+N°2 S.3670) Max N°2 Pool LED
IP65 CLASS II SELV
Dimensions 300mm x300mm x230mm
S.3660
JUNCTION BOX
Junction box IP65 with cable glands for 3 cables IN (possibility of 5 more cables IN with S.3670 accessories)
maximum load capacity 500Kg Dimensions 300mm x300mm x230mm
S.3670
1 ADDITIONAL CABLE GLAND
Required for the connection of over 2 luminaires to the junction box /power supply.
468

REMOTE POWER SUPPLY DIMMABLE 24V DC constant voltage
Required to run the following:
Standard fixtures in constant voltage in 24V
Variants in constant voltage 24V (available on request with surcharge)
(See numeric index from page 473)
IP20 Independent
S.3426
DIMMABLE DALI
16W 230V/24V DC
IP20 CLASS II SELV
Dimensions 110mm x50mm x20mm
S.2420
DIMMABLE DALI, PUSH DIM and DSI 35W 230V/24V DC
IP20 CLASS II SELV
Dimensions 195mm x43mm x30,2mm
S.2421
DIMMABLE DALI, PUSH DIM and DSI 60W 230V/24V DC
IP20 CLASS II SELV
Dimensions 225mm x43mm x29,8mm
S.2424
DIMMABLE 1-10V and PUSH DIM 60W 230V/24V DC
IP20 CLASS II SELV
Dimensions 125mm x82mm x29mm
S.2422
DIMMABLE DALI, PUSH DIM and DSI 100W 230V/24V DC
IP20 CLASS II SELV
Dimensions 295mm x43mm x29,8mm
IP rated Box
S.2438
DIMMABLE DALI
16W 230V/24V DC
IP67 CLASS II SELV
Dimensions 175,5mm x86,5mm x43mm
S.2439
DIMMABLE 1-10V and PUSH DIM
16W 230V/24V DC
IP67 CLASS II SELV
Dimensions 175,5mm x86,5mm x43mm
S.2423
DIMMABLE DALI, 1-10V, PUSH DIM 60W 230V/24V DC
IP55 CLASS II SELV
Dimensions 260mm x240mm x100mm
S.2425
DIMMABLE DALI, 1-10V, PUSH DIM 90W 230V/24V DC
IP55 CLASS II SELV
Dimensions 260mm x240mm x100mm
IP rated Independent
S.2427
DIMMABLE 1-10V
60W 230V/24V DC
IP67 CLASS II SELV
Dimensions 150mm x53mm x35mm
S.2428
DIMMABLE 1-10V
90W 230V/24V DC
IP67 CLASS II SELV
Dimensions 171mm x63mm x37,5mm
S.2426
DIMMABLE DALI
120W 230V/24V DC
IP67 CLASS II SELV
Dimensions 191mm x63mm x37,5mm
469

REMOTE POWER SUPPLY NOT DIMMABLE constant current Required to run the following:
Standard products in constant current (mA)
Variants in constant current (mA) )(available on request with surcharge)
( see numeric index from page 473)
IP20 Independent
S.3424
FIXED-POWER 230V/1200mA Power consumption 6W
IP20 CLASS II SELV
Dimensions 57mm x31mm x21mm
S.2430
MULTI-POWER 230V/250mA-700mA Maximum power consumption 20W IP20 CLASS II SELV
Dimensions 110mm x50mm x20mm
S.2431
MULTI-POWER 230V/350mA-1050mA Maximum power consumption 39W IP20 CLASS II SELV
Dimensions 130mm x67mm x21mm
S.2432
MULTI-POWER 230V/350mA-1050mA Maximum power consumption 50W IP20 CLASS II SELV
Dimensions 130mm x67mm x21mm
IP rated Box
S.2435
MULTI-POWER 230V/250mA-700mA Maximum power consumption 20W
IP67 CLASS II SELV
Dimensions 175,5mm x86,5mm x43mm
S.2436
MULTI-POWER 230V/350mA-1050mA Maximum power consumption 50W IP55 CLASS II SELV
Dimensions 260mm x260mm x100mm
REMOTE POWER SUPPLY DIMMABLE constant current Required to run the following:
Standard products in constant current (mA)
Variants in constant current (mA) )(available on request with surcharge)
( see numeric index from page 473)
IP20 Independent
S.3426
MULTI-POWER DIMMABLE DALI 230V/250mA-700mA
Maximum power consumption 20W IP20 CLASS II SELV
Dimensions 110mm x50mm x20mm
S.3423
MULTI-POWER DIMMABLE 1-10V, PUSH DIM 230V/350mA-1050mA
Maximum power consumption 39W
IP20 CLASS II SELV
Dimensions 130mm x67mm x21mm
S.3427
MULTI-POWER DIMMABLE DALI, 1-10V and PUSH DIM 230V/350mA-1050mA
Maximum power consumption 60W IP20 CLASS II SELV
Dimensions 125mm x80mm x20mm
IP rated Box
S.2437
MULTI-POWER DIMMABLE DALI, 1-10V and PUSH DIM 230V/350mA-1050mA Maximum power consumption 60W IP55 CLASS II SELV
Dimensions 57mm x31mm x21mm
S.2438
MULTI-POWER DIMMABLE DALI 230V/250mA-700mA
Maximum power consumption 20W IP65 CLASS II SELV
Dimensions 000mm x000mm x000mm
S.2439
MULTI-POWER DIMMABLE 1-10V and PUSH DIM 230V/250mA-700mA
Maximum power consumption 20W
IP65 CLASS II SELV
Dimensions 000mm x000mm x000mm
470

REMOTE POWER SUPPLY DIMMABLE RGBW constant voltage 24V PWM
Required to run the following:
Standard RGBW fixtures in constant voltage in 24V PWM
(See numeric index from page 473)
IP rated Box
S.3411 *
60W (15W for 4 channels) 230V/24V PWM DMX address included
controlled by DMX (type S.3493) protocol IP55 CLASS II SELV
Dimensions 260mm x260mm x100mm S.3413 *
90W (22,5W for 4 channels) 230V/24V PWM DMX address included *
controlled by DMX (type S.3493) protocol IP55 CLASS II SELV
Dimensions 260mm x260mm x100mm S.2440 *
320W (80W for 4 channels) 230V/24V PWM DMX address included
controlled by DMX (type S.3493) protocol IP55 CLASS II SELV
Dimensions 310mm x310mm x110mm
Junction rated Box for POOL
S.3668 *
35W 230V/24V PWM for:
Max N°3 Micropool LED RGBW (+N°2 S.3670) Max N°2 Minipool LED RGBW (+N°1 S.3670) Max N°1 Pool LED RGBW
DMX address included
controlled by DMX (type S.3493) protocol IP65 CLASS II SELV
Dimensions 200mm x200mm x220mm
S.3667 *
90W 230V/24V PWM for:
Max N°4 Micropool LED RGBW (+N°3 S.3670) Max N°4 Minipool LED RGBW (+N°3 S.3670) Max N°2 Pool LED RGBW (+N°1 S.3670)
DMX address included
controlled by DMX (type S.3493) protocol IP65 CLASS II SELV
Dimensions 300mm x300mm x230mm
DMX CONTROLLER
A
S.3493
DMX CONTROLLER SET
This DMX system includes a controller (A) and a control unit (B).
The controller has a wall fixed base wired to the control unit.
IP20
S.3494
REMOTE CONTROL UNIT
It allows the wireless connection via radio waves between the controller (A) and the control unit (B).
Hence the controller (A) becomes portable.
IP20
* Dimmable DALI version available on request with surcharge.
B
471
DMX 512 24V PWM
DMX 512 24V PWM
DMX 512 24V PWM

SURGE PROTECTION DEVICE
Outdoor Lighting fixtures are subject to many different types of temporary, transitional or permanent electrical disturbances. Such disturbances can create permanent damage or failure that can jeopardize the performance or lifetime of the fixtures. Surge protection devices are utilised to limit the damage of such electrical disturbances. Each fixture must be connected to one single device at a distance of no more than 10m away.
A correct protection system against overvoltage or voltage spikes must also provide for the installation of a surge protection device inside the mains electrical switchboard (the selection of this device is the responsibility of the electrician or electrical contractor).
For Class I y Lighting Fixtures S.2498
SURGE PROTECTION DEVICE 10kV
Compatible with all lighting fixtures classified under electrical Protection Class I y
Rated voltage 230-277V
SPD type 2+3
Max Surge Protection 10kV IP67
For Class II q Lighting Fixtures S.2499
SURGE PROTECTION DEVICE 10kV
Compatible with all lighting fixtures classified under electrical Protection Class II q
Rated voltage 230-277V
SPD type 2+3
Max Surge Protection 10kV IP67
472

INDEX
ARTICLE on/off 24V mA DALI RGBW PAGE ARTICLE
on/off 24V mA DALI RGBW PAGE
ARTICLE
on/off 24V mA DALI RGBW PAGE
GLASS LUMINAIRES
B.9000W.01 B.9005W.01 B.9009
CONCRETE LUMINAIRES
C.8005W.35
C.8006W.35 C.8015W.35 C.8016W.35 C.8022W C.8024W C.8026W C.8028W C.8030W C.8033 C.8034W C.8035 C.8036W C.8037 C.8038W C.8039 C.8040W C.8050W.35 C.8054 C.8100W.35 C.8101W.35 C.8105W.35 C.8106W.35 C.8122W C.8130W C.8150W.35 C.8155W.35 C.8222W C.8230W C.8330W C.8334W C.8336W C.8338W C.8340W
WOOD LUMINAIRES
L.9201W.01 L.9201W.20 L.9202W.01 L.9202W.20 L.9206W.01 L.9206W.20 L.9211W.01 L.9211W.20 L.9230W.01 L.9230W.20 L.9231W.01 L.9231W.20 L.9236W.01 L.9236W.20 L.9240W.01 L.9240W.20 L.9241W.01 L.9241W.20 L.9260W.01 L.9260W.20
ALUMINIUM LUMINAIRES
STANDARD LUMINAIRES
S.1002.09
S.1004.09 199 S.1005.09 199 S.1013.14 199 S.1014.09 S.1016.14 S.1016.24 9 S.1022.09
9 S.1030
9 S.1031
9 S.1032.09
177 S.1040
177 S.1041
178 S.1042.09 178 S.1076N.14 178 S.1100W.24 180 S.1101W.24 180 S.1102W.24 180 S.1103W.24 180 S.1104W.24 180 S.1105W.24 180 S.1107.24 180 S.1108
180 S.1109.09 11 S.1110W.14 11 S.1111W.14 11 S.1120W.14 11 S.1121W.14 11 S.1130W.14 11 S.1131W.14
193 S.1140W.14 193 S.1141W.14 13 S.1200W.14 13 S.1200W.24 195 S.1205W.14 195 S.1205W.24 185 S.1210W.14 185 S.1210W.24 185 S.1212W.14 185 S.1212W.24 185 S.1220W.14 S.1220W.24 S.1225W.14 18 S.1225W.24 18 S.1226W.14 18 S.1226W.24 18 S.1227W.14 18 S.1227W.24 18 S.1230W.14 18 S.1230W.24 18 S.1235W.14 17 S.1235W.24 17 S.1236W.14 19 S.1236W.24 19 S.1237W.14 19 S.1237W.24 19 S.1239.14 17 S.1239.24 17 S.1240W.14 19 S.1245W.14 19 S.1246W.14 17 S.1247W.14 17 S.1250W.14 S.1255W.14 S.1256W.14
77 77 77 79 25 44 44 77 78 78 78 78 78 78 78 75 75 75 75 75 75 75 74 74 77 77 77 77 78 78 78 78 46 46 46 46 46 46 46 46 45 45 45 45 45 45 45 45 47 47 47 47 47 47 47 47 44 44
261 51 51 51 261 51 51
S.1257W.14
S.1300W.14 S.1300W.24 S.1301W.14 S.1301W.24 S.1305W.14 S.1305W.24 S.1308.09 S.1309.09 S.1310W.14 S.1310W.24 S.1315W.14 S.1315W.24 S.1316W.14 S.1316W.24 S.1318.09 S.1319.09 S.1320W.14 S.1320W.24 S.1325W.14 S.1325W.24 S.1326W.14 S.1326W.24 S.1328.09 S.1330W.14 S.1330W.24 S.1331W.14 S.1331W.24 S.1335W.14 S.1335W.24 S.1337W.14 S.1337W.24 S.1338W.14 S.1338W.24 S.1339W.14 S.1339W.24 S.1340W.14 S.1340W.24 S.1345W.14 S.1345W.24 S.1346W.14 S.1346W.24 S.1350W.14 S.1350W.24 S.1355W.14 S.1355W.24 S.1356W.14 S.1356W.24 S.1360W.14 S.1360W.24 S.1365W.14 S.1365W.24 S.1366W.14 S.1366W.24 S.1368.09 S.1370W.14 S.1370W.24 S.1375W.14 S.1375W.24 S.1376W.14 S.1376W.24 S.1380W.14 S.1380W.24 S.1385W.14 S.1385W.24
51 35 35 33 33 35 35 35 33 36 36 36 36 36 36 36 36 37 37 37 37 37 37 37 35 35 33 33 35 35 40 40 40 40 40 40 36 36 36 36 36 36 37 37 37 37 37 37 38 38 38 38 38 38 38 40 40 40 40 40 40 41 41 41 41
Standard fixture with integral DALI driver.
Standard fixture in constant voltage in 24V (requires a remote driver).
Standard fixture in constant current (mA) (requires a remote driver).
Standard ON/OFF fixture in 230V.
Standard RGBW fixture in constant voltage in 24V PWM (requires a remote driver).
VARIANTS LUMINAIRES AVAILABLE ON REQUEST WITH SURCHARGE
Variant with integral DALI driver.
Variants in constant voltage in 24V (requires remote driver). Variant in constant current (mA) (requires remote driver).

INDEX
ARTICLE
S.1386W.14
S.1386W.24 S.1390W.14 S.1390W.24 S.1395W.14 S.1395W.24 S.1396W.14 S.1396W.24 S.1405W.01 S.1405W.14 S.1415W.01 S.1415W.14 S.1416W.01 S.1416W.14 S.1425W.01 S.1425W.14 S.1426W.01 S.1426W.14 S.1435W.01 S.1435W.14 S.1436W.01 S.1436W.14 S.1500W.01 S.1500W.14 S.1501W.01 S.1501W.14 S.1505W.01 S.1505W.14 S.1506W.01 S.1506W.14 S.1508.01 S.1508.14 S.1509.01 S.1509.14 S.1510W.01 S.1510W.14 S.1511W.01 S.1511W.14 S.1513W.01 S.1513W.14 S.1515W.01 S.1515W.14 S.1516W.01 S.1516W.14 S.1517W.01 S.1517W.14 S.1519.01 S.1519.14 S.1520W.01 S.1520W.14 S.1521W.01 S.1521W.14 S.1530W.01 S.1530W.14 S.1531W.01 S.1531W.14 S.1533W.01 S.1533W.14 S.1545W.01 S.1545W.14 S.1546W.01 S.1546W.14 S.1900W.14 S.1901W.14
STANDARD LUMINAIRES
on/off 24V mA DALI RGBW PAGE ARTICLE
on/off 24V mA DALI RGBW PAGE
on/off 24V mA DALI RGBW PAGE ARTICLE
41 S.1905W.14
41 S.1910W.14 41 S.1911W.14 41 S.1915W.14 41 S.1920W.14 41 S.1921W.14 41 S.1925W.14 41 S.2002W.24
355 S.2003W.24 355 S.2009
355 S.2012W.24 355 S.2013W.24 355 S.2110W.24 355 S.2111W.24 355 S.2131W.24 355 S.2140W.24 355 S.2141W.24 355 S.2149.24 355 S.2301N.01 355 S.2301N.14 355 S.2301W.01 355 S.2301W.14
27 S.2302N.01 27 S.2302N.14 27 S.2302W.01 27 S.2302W.14 27 S.2303N.01 27 S.2303N.14 25 S.2303W.01 25 S.2303W.14 25 S.2305.01 25 S.2305.14 27 S.2306.01 27 S.2306.14 28 S.2321N.01 28 S.2321N.14 28 S.2321W.01 28 S.2321W.14 28 S.2322N.01 28 S.2322N.14 28 S.2322W.01 28 S.2322W.14 28 S.2323N.01 28 S.2323N.14 28 S.2323W.01 28 S.2323W.14 28 S.2325.01 28 S.2325.14 29 S.2326.01 29 S.2326.14 29 S.2327.13 29 S.2328.13 29 S.2329.13 29 S.2351N.01 29 S.2351N.14 29 S.2351W.01 29 S.2351W.14 29 S.2352N.01 29 S.2352N.14 29 S.2352W.01 29 S.2352W.14 29 S.2353N.01
137 S.2353N.14 137 S.2353W.01
137 S.2353W.14 137 S.2371N.01 137 S.2371N.14 137 S.2371W.01 137 S.2371W.14 137 S.2372N.01 137 S.2372N.14 433 S.2372W.01 433 S.2372W.14
432 S.2373N.01
433 S.2373N.14
433 S.2373W.01 407 S.2373W.14 407 S.2377.13 429 S.2378.13 387 S.2379.13 387 S.2400
387 S.2401 269 S.2402 269 S.2403 269 S.2404 269 S.2405 269 S.2406 269 S.2420 269 S.2421 269 S.2422 269 S.2423 269 S.2424 269 S.2425 269 S.2426 269 S.2427 269 S.2428 269 S.2430
269 S.2431
270 S.2432
270 S.2435 270 S.2436 270 S.2437 270 S.2438 270 S.2439 270 S.2440 270 S.2498 270 S.2499 270 S.2800.14 270 S.2800.24 270 S.2801.14 270 S.2801.24 270 S.2809.14 270 S.2809.24
270 S.2811.14
271 S.2812.14
271 S.2812.24 271 S.2813.14 275 S.2813.24 275 S.2814.14 275 S.2814.24 275 S.2815.24 275 S.2816.14 275 S.2816.24 275 S.2817.24 275 S.2818.14 275 S.2818.24 275 S.2826.14 275 S.2826.24
VARIANTS LUMINAIRES AVAILABLE ON REQUEST WITH SURCHARGE
Variant with integral DALI driver.
Variants in constant voltage in 24V (requires remote driver). Variant in constant current (mA) (requires remote driver).
275 276 276 276 276 276 276 276 276 276 276 276 276 277 277 277 468 468 468 468 468 468 468 469 469 469 469 469 469 469 469 469 468 470 470 468 470 470 469 469 471 472 472 457 429 457 429 442 442 453 457 457 457 457 342 448 448 445 445 448 445 445
79 461
Standard fixture with integral DALI driver.
Standard fixture in constant voltage in 24V (requires a remote driver).
Standard fixture in constant current (mA) (requires a remote driver).
Standard ON/OFF fixture in 230V.
Standard RGBW fixture in constant voltage in 24V PWM (requires a remote driver).

INDEX
ARTICLE
S.2840 S.2842.01 S.2842.14 S.2842.24 S.2843.01 S.2843.14 S.2843.24 S.2844.01 S.2844.14 S.2844.24 S.2845.01 S.2845.14 S.2845.24 S.2846.14 S.2846.24 S.2848.14 S.2848.24 S.2849 S.2900W.01 S.2900W.14 S.2905W.01 S.2905W.14 S.2910W.01 S.2910W.14 S.2915W.01 S.2915W.14 S.2920W.01 S.2920W.14 S.2925W.01 S.2925W.14 S.2930W.14 S.2940W.14 S.3000N.01 S.3000N.14 S.3000W.01 S.3000W.14 S.3005N.01 S.3005N.14 S.3005W.01 S.3005W.14 S.3010N.01 S.3010N.14 S.3010W.01 S.3010W.14 S.3015W.01 S.3015W.14 S.3016W.01 S.3016W.14 S.3018W.01 S.3018W.14 S.3019.01 S.3019.14 S.3044.01 S.3044.14 S.3045.01 S.3045.14 S.3046.01 S.3046.14 S.3047.01 S.3047.14 S.3049 S.3050N.01 S.3050N.14 S.3050W.01
STANDARD LUMINAIRES
on/off 24V mA DALI RGBW PAGE ARTICLE
on/off 24V mA DALI RGBW PAGE ARTICLE
62 S.3315W.19
on/off 24V mA DALI RGBW PAGE
79 S.3050W.14 64 S.3055N.01 64 S.3055N.14 64 S.3055W.01 64 S.3055W.14 64 S.3060N.01 64 S.3060N.14 64 S.3060W.01 64 S.3060W.14 64 S.3065W.01 64 S.3065W.14 64 S.3066W.01 64 S.3066W.14 79 S.3068W.01
461 S.3068W.14 79 S.3069.01 79 S.3069.14 64 S.3070N.01 341 S.3070N.14 341 S.3070W.01 341 S.3070W.14 341 S.3075N.01 341 S.3075N.14 341 S.3075W.01 341 S.3075W.14
341 S.3079
341 S.3090N.24 341 S.3091N.24 341 S.3095N.24 341 S.3100W.14 342 S.3101W.14 342 S.3105W.14
61 S.3150W.01 61 S.3150W.14 61 S.3151W.01 61 S.3151W.14 61 S.3155W.01 61 S.3155W.14 61 S.3156W.01 61 S.3156W.14 61 S.3159.14 61 S.3170W.01 61 S.3170W.14 61 S.3171W.01 55 S.3171W.14 55 S.3172W.01 55 S.3172W.14 55 S.3300N.19 55 S.3300W.19 55 S.3301N.19 56 S.3301W.19 56 S.3305N.19 64 S.3305W.19 64 S.3306N.19 64 S.3306W.19 64 S.3310N.19 64 S.3310W.19 64 S.3311N.19 64 S.3311W.19 64 S.3312N.19 28 S.3312W.19 62 S.3313N.19 62 S.3313W.19 62 S.3315N.19
62 S.3316N.19 62 S.3316W.19 62 S.3317N.19 62 S.3317W.19 62 S.3319N.19 62 S.3319W.19 62 S.3321N.19 62 S.3321W.19 55 S.3330N.19 55 S.3330W.19 55 S.3340N.19 55 S.3340W.19 55 S.3354N.19
55 S.3354W.19
56 S.3364N.19
56 S.3364W.19 63 S.3374N.19 63 S.3374W.19 63 S.3384N.19 63 S.3384W.19 63 S.3390N.19 63 S.3390W.19 63 S.3400
63 S.3401
54 S.3408 449 S.3409 449 S.3411 449 S.3413
69 S.3423 69 S.3424 69 S.3425
283 S.3426
283 S.3427
283 S.3493
283 S.3494
283 S.3502
283 S.3503
283 S.3504
283 S.3505
282 S.3511W.14 284 S.3511W.24 284 S.3515W.14 284 S.3515W.24 284 S.3523.14 284 S.3523.24 284 S.3524.09
96 S.3552.14 96 S.3552.24 95 S.3553.14 95 S.3553.24 95 S.3554.09 95 S.3564W.14 95 S.3564W.24
95 S.3565W.14
96 S.3565W.24
96 S.3594W.14 96 S.3594W.24 96 S.3595W.14 96 S.3595W.24 96 S.3603.19 96 S.3607.19 96 S.3617.19 96 S.3627.19
VARIANTS LUMINAIRES AVAILABLE ON REQUEST WITH SURCHARGE
Variant with integral DALI driver.
Variants in constant voltage in 24V (requires remote driver). Variant in constant current (mA) (requires remote driver).
96 97 97 99 99
101 101 101 101
95 95 95 95 99 99 95 95 99 99 96 96
241 241 468 468 264 264 471 471 470 470 468 469 470 471 471
83 84 83 84 84 84 84 84 83 83 13 84 84 83 83 37 83 83 83 83 83 83 83 83
465 465 465 465
Standard fixture with integral DALI driver.
Standard fixture in constant voltage in 24V (requires a remote driver).
Standard fixture in constant current (mA) (requires a remote driver).
Standard ON/OFF fixture in 230V.
Standard RGBW fixture in constant voltage in 24V PWM (requires a remote driver).

INDEX
ARTICLE
S.3629.19 S.3630.19 S.3660 S.3664 S.3665 S.3667 S.3668 S.3670 S.3671 S.3672 S.3673.19 S.3676.19 S.3683.19 S.3686.19 S.3693.19 S.3696.19 S.3761W.14 S.3781.09 S.3875W.01 S.3875W.14 S.3875W.20 S.3877W.01 S.3877W.14 S.3877W.20 S.3883W.01 S.3883W.14 S.3883W.20 S.3884W.01 S.3884W.14 S.3884W.20 S.3885W.01 S.3885W.14 S.3885W.20 S.3887W.01 S.3887W.14 S.3887W.20 S.3893W.01 S.3893W.14 S.3893W.20 S.3894W.01 S.3894W.14 S.3894W.20 S.3895W.01 S.3895W.14 S.3895W.20 S.3897W.01 S.3897W.14 S.3897W.20 S.3903W.14 S.3913W.14 S.3950W.14 S.3952W.14 S.3960W.14 S.3962W.14 S.3973N.14 S.3976N.14 S.3993N.14 S.3993N.24 S.3994N.14 S.3994N.24 S.4049W.14 S.4053W.14 S.4069W.14 S.4089W.14
STANDARD LUMINAIRES
on/off 24V mA DALI RGBW PAGE
ARTICLE
S.4101W.14
S.4104W.14 S.4110W.14 S.4114W.14 S.4117W.14 S.4120N.14 S.4120N.24 S.4128.14 S.4128.24 S.4129 S.4130W.14 S.4131W.14 S.4135W.14 S.4136W.14 S.4153W.14 S.4157W.14 S.4163W.14 S.4167W.14 S.4171 S.4172 S.4213.14 S.4219 S.4343 S.4502W.14 S.4503 S.4511W.14 S.4521W.14 S.4523 S.4525W.14 S.4543W.14 S.4551W.14 S.4552W.14 S.4553 S.4561W.14 S.4605W.14 S.4610W.14 S.4613 S.4615W.14 S.4653 S.4655W.01 S.4655W.14 S.4660 S.4663.14 S.4665W.14 S.4708W.09 S.4746W.09 S.4757W.09 S.4771W.09 S.4908W.19 S.4946W.19 S.4957W.19 S.4971W.19 S.5026W.14 S.5027W.14 S.5033W.14 S.5037W.14 S.5040W.14 S.5047W.14 S.5054W.14 S.5064W.14 S.5067W.14 S.5070W.14 S.5075W.14 S.5077W.14
on/off 24V mA DALI RGBW PAGE
401 401 402 402 402 439 439 438 438 402 411 411 411 411 412 412 412 412 402 401 403 400 229 224 223 223 224 223 223 225 224 223 223 225 229 229 225 229 233 233 233 232 233 233 161 155 157 159 160 155 156 158 252 249 252 249 252 250 255 255 249 252 252 249
ARTICLE
S.5080W.14
S.5087W.14 S.5090W.14 S.5097W.14 S.5120W.19 S.5121W.19 S.5128W.19 S.5130W.19 S.5131W.19 S.5178W.19 S.5181W.19 S.5185W.19 S.5200.14 S.5203.14 S.5210W.14 S.5210W.20 S.5213W.14 S.5213W.20 S.5217W.14 S.5217W.20 S.5223W.14 S.5223W.20 S.5227W.14 S.5227W.20 S.5233W.14 S.5233W.20 S.5237W.14 S.5237W.20 S.5240W.14 S.5240W.20 S.5243W.14 S.5243W.20 S.5247W.14 S.5247W.20 S.5253W.14 S.5253W.20 S.5257W.14 S.5257W.20 S.5263W.14 S.5263W.20 S.5267W.14 S.5267W.20 S.5277W.14 S.5277W.20 S.5297W.14 S.5297W.20 S.5301.14 S.5310.14 S.5311W.14 S.5311W.20 S.5314W.14 S.5317W.14 S.5317W.20 S.5320W.14 S.5320W.20 S.5327W.14 S.5327W.20 S.5330W.14 S.5330W.20 S.5334W.14 S.5337W.14 S.5337W.20 S.5339W.14 S.5350.14
on/off 24V mA DALI RGBW PAGE
465 465 468 468 468 471 471 468 464 464 466 466 466 466 466 466
84
84 316 316 316 317 317 317 315 315 315 315 315 315 316 316 316 317 317 317 315 315 315 315 315 315 316 316 316 317 317 317 347 347 347 347 348 348 453 453 461 461 461 461 245 245 245 245
253 250 253 250 111 111 111 112 112 111 111 111 390 390 395 395 395 395 397 397 394 394 396 396 394 394 396 396 395 395 395 395 397 397 394 394 396 396 394 394 396 396 397 397 397 397 390 207 391 391 417 391 391 391 391 391 391 391 391 417 391 391 417 296
Standard fixture with integral DALI driver.
Standard fixture in constant voltage in 24V (requires a remote driver).
Standard fixture in constant current (mA) (requires a remote driver).
Standard ON/OFF fixture in 230V.
Standard RGBW fixture in constant voltage in 24V PWM (requires a remote driver).
VARIANTS LUMINAIRES AVAILABLE ON REQUEST WITH SURCHARGE
Variant with integral DALI driver.
Variants in constant voltage in 24V (requires remote driver). Variant in constant current (mA) (requires remote driver).

INDEX
ARTICLE
S.5370W.14
S.5370W.20 S.5374W.14 S.5377W.14 S.5377W.20 S.5379W.14 S.5400W S.5402W S.5430W S.5434W S.5438W S.5444W S.5451W S.5455W S.5460W S.5461W S.5468W S.5485W S.5488W S.5495W.19 S.5498W.19 S.5504 S.5506 S.5510.09 S.5511.09 S.5512.09 S.5515N.19 S.5515W.19 S.5516.09 S.5520.09 S.5521.09 S.5525N.19 S.5525W.19 S.5530.09 S.5531.09 S.5545N.19 S.5545W.19 S.5555N.19 S.5555W.19 S.5565N.19 S.5565W.19 S.5575N.19 S.5575W.19 S.5585N.19 S.5585W.19 S.5595N.19 S.5595W.19 S.5601N.14 S.5611N.14 S.5621N.14 S.5690 S.5691N.14 S.5692N.14 S.5693N.14 S.5694N.14 S.5695N.14 S.5696N.14 S.5697N.14 S.5698N.14 S.5699 S.5770W.19 S.5774W.19 S.5778W.19 S.5781W.19
STANDARD LUMINAIRES
on/off 24V mA DALI RGBW PAGE ARTICLE
on/off 24V mA DALI RGBW PAGE ARTICLE
on/off 24V mA DALI RGBW PAGE
391 S.5784W.19 391 S.5785W.19 418 S.5790W.19 391 S.5791W.19 391 S.5798W.19 418 S.5901
145 S.5902.13 145 S.5905N.13 105 S.5905W.13 105 S.5931.19
105 S.5935W.19
106 S.5942W.19
106 S.6020W.14
106 S.6023
107 S.6040W.14
107 S.6050W.14 107 S.6060W.14 145 S.6063
145 S.6070W.14 149 S.6073
149 S.6080W.14
68 S.6083
10 S.6090W.14 378 S.6150W.14 378 S.6150W.20
378 S.6159
379 S.6160W.14
379 S.6160W.20 378 S.6169
378 S.6230N.01
378 S.6230N.14
379 S.6230W.01
379 S.6230W.14 378 S.6239
378 S.6240N.01
379 S.6240N.14
379 S.6240W.01 379 S.6240W.14
379 S.6247
380 S.6250N.01
380 S.6250N.14 380 S.6250W.01 380 S.6250W.14 380 S.6255N.01 380 S.6255N.14 380 S.6255W.01 380 S.6255W.14 167 S.6256
167 S.6257
167 S.6260N.01
168 S.6260N.14
170 S.6260W.01 170 S.6260W.14 170 S.6268
170 S.6270N.01 169 S.6270N.14 169 S.6270W.01 169 S.6270W.14 169 S.6278
168 S.6280N.01 105 S.6280N.14 105 S.6280W.01
105 S.6280W.14
106 S.6288
106 S.6300W.01
106 S.6300W.14
107 S.6306W.14
107 S.6307W.14 107 S.6309.14
264 S.6320W.01
265 S.6320W.14
265 S.6325W.14 265 S.6329
149 S.6340W.01 149 S.6340W.14 149 S.6346W.14 207 S.6347W.14 207 S.6350W.14 207 S.6359
206 S.6360W.14 205 S.6400W.01
205 S.6400W.14
206 S.6420N.01
206 S.6420N.14 205 S.6420W.01
205 S.6420W.14
206 S.6425N.01
423 S.6425N.14 423 S.6425W.01
422 S.6425W.14
423 S.6500W.01
423 S.6500W.09 422 S.6505W.01 215 S.6505W.09 215 S.6510W.01 215 S.6510W.09 215 S.6515W.01
215 S.6515W.09
216 S.6516W.01
216 S.6516W.09 216 S.6530W.01
216 S.6530W.09
217 S.6530W.14
215 S.6550W.01 215 S.6550W.09 215 S.6550W.14
215 S.6605
216 S.6615W.01
216 S.6615W.14 216 S.6618W.01 216 S.6618W.14 215 S.6622W.01 217 S.6622W.14 216 S.6625W.01 216 S.6625W.14 216 S.6628W.01
216 S.6628W.14
217 S.6630
215 S.6643W.01 215 S.6643W.14 215 S.6646W.01 215 S.6646W.14
215 S.6649W.01
216 S.6649W.14
216 S.6655W.01 216 S.6655W.14
216 S.6658W.01
217 S.6658W.14
VARIANTS LUMINAIRES AVAILABLE ON REQUEST WITH SURCHARGE
Variant with integral DALI driver.
Variants in constant voltage in 24V (requires remote driver). Variant in constant current (mA) (requires remote driver).
297 297 297 297 206 211 211 211 211 298 298 298 298 219
11 219 303 303 239 239 239 239 239 239 239 239 337 337 337 337 337 337 337 337 337 337 337 337 337 337 337 337 320 323 323 322 322 321 321 322 322 321 321 320 89 89 323 323 89 89 322 322 321 321
Standard fixture with integral DALI driver.
Standard fixture in constant voltage in 24V (requires a remote driver).
Standard fixture in constant current (mA) (requires a remote driver).
Standard ON/OFF fixture in 230V.
Standard RGBW fixture in constant voltage in 24V PWM (requires a remote driver).

INDEX
ARTICLE
S.6664W.01
S.6664W.14 S.6665W.01 S.6665W.14 S.6675W.01 S.6675W.14 S.6678W.01 S.6678W.14 S.6680W.01 S.6680W.14 S.6689W.01 S.6689W.14 S.6695W.01 S.6695W.14 S.6700W.01 S.6700W.14 S.6740W.01 S.6740W.14 S.6750W.01 S.6750W.14 S.6800W.01 S.6800W.14 S.6840W.01 S.6840W.14 S.6850W.01 S.6850W.14 S.6950W.01 S.6950W.14 S.6955W.01 S.6955W.14 S.6960W.01 S.6960W.14 S.6965W.01 S.6965W.14 S.6980W.01 S.6980W.14 S.6981W.01 S.6981W.14 S.6985W.01 S.6985W.14 S.6986W.01 S.6986W.14 S.6990W.01 S.6990W.14 S.6991W.01 S.6991W.14 S.6995W.01 S.6995W.14 S.6996W.01 S.6996W.14 S.7011W.13 S.7012W.13 S.7016W.13 S.7045N.14 S.7045N.24 S.7049.14 S.7049.24 S.7050N.14 S.7050N.24 S.7059.14 S.7059.24 S.7100N.14 S.7100N.24 S.7108.14 S.7108.24
STANDARD LUMINAIRES
on/off 24V mA DALI RGBW PAGE ARTICLE 89 S.7109
on/off 24V mA DALI RGBW PAGE ARTICLE
on/off 24V mA DALI RGBW PAGE
89 S.7110N.14 89 S.7110N.24 89 S.7120N.14
323 S.7120N.24 323 S.7130N.14 322 S.7130N.24 322 S.7140N.14 321 S.7140N.24 321 S.7150N.14 321 S.7150N.24 321 S.7201W.01 322 S.7201W.14 322 S.7201W.20 333 S.7202W.01 333 S.7202W.14 333 S.7202W.20 333 S.7206W.01 333 S.7206W.14 333 S.7206W.20 333 S.7211W.01 333 S.7211W.14 333 S.7211W.20 333 S.7212W.01 333 S.7212W.14 333 S.7212W.20 327 S.7213W.01 327 S.7213W.14 327 S.7213W.20 327 S.7215W.01 328 S.7215W.14 328 S.7215W.20 328 S.7219
328 S.7220W.01 327 S.7220W.14 327 S.7220W.20 327 S.7231W.01 327 S.7231W.14 327 S.7236W.01 327 S.7236W.14 327 S.7241W.01 327 S.7241W.14 328 S.7245W.01 328 S.7245W.14 328 S.7246W.01 328 S.7246W.14 328 S.7249
328 S.7250W.01 328 S.7250W.14 328 S.7250W.20 141 S.7252W.01 141 S.7252W.14 141 S.7252W.20 457 S.7260W.01 457 S.7260W.14 456 S.7260W.20 456 S.7261W.01 457 S.7261W.14 457 S.7261W.20 456 S.7262W.01 456 S.7262W.14 444 S.7262W.20 444 S.7265W.01 442 S.7265W.14 442 S.7265W.20
442 S.7266W.01
444 S.7266W.14 444 S.7266W.20 445 S.7267W.01 445 S.7267W.14 443 S.7267W.20 443 S.7269
445 S.7270W.01 445 S.7270W.14 443 S.7280W.01 443 S.7280W.14 307 S.7281W.01 307 S.7281W.14 307 S.7282W.01 307 S.7282W.14 307 S.7284
307 S.7285W.14 307 S.7286W.14 307 S.7287W.14 307 S.7288
307 S.7289
307 S.7290W.01 307 S.7290W.14 307 S.7295W.01 307 S.7295W.14 307 S.7300W.14 307 S.7305W.14 307 S.7309
307 S.7320W.14 307 S.7325W.14 307 S.7329
307 S.7340W.19 306 S.7345W.19 307 S.7349
307 S.7360W.19 307 S.7365W.19 289 S.7369
289 S.7400W.01 289 S.7400W.14 289 S.7401W.01 289 S.7401W.14 289 S.7405W.19 290 S.7406W.19 290 S.7409
290 S.7410W.01 290 S.7410W.14
18 S.7411W.01 307 S.7411W.14 307 S.7415W.19 307 S.7416W.19 307 S.7419
307 S.7420W.01 307 S.7420W.14 307 S.7421W.01 307 S.7421W.14 307 S.7425W.19 307 S.7426W.19 307 S.7429
307 S.7430W.01 307 S.7430W.14 307 S.7431W.01 307 S.7431W.14 307 S.7435W.19 307 S.7436W.19 307 S.7439
VARIANTS LUMINAIRES AVAILABLE ON REQUEST WITH SURCHARGE
Variant with integral DALI driver.
Variants in constant voltage in 24V (requires remote driver). Variant in constant current (mA) (requires remote driver).
307 307 307 307 307 307 288 290 290 294 294 293 293 293 293 292 294 293 293 292 292 294 294 294 294 373 373 373 373 373 373 374 374 374 374 374 374 363 363 363 363 363 363 363 364 364 364 364 364 364 364 366 366 366 366 366 366 366 367 367 367 367 367 367 367
Standard fixture with integral DALI driver.
Standard fixture in constant voltage in 24V (requires a remote driver).
Standard fixture in constant current (mA) (requires a remote driver).
Standard ON/OFF fixture in 230V.
Standard RGBW fixture in constant voltage in 24V PWM (requires a remote driver).

INDEX
ARTICLE
S.7460W.01
S.7460W.14 S.7461W.01 S.7461W.14 S.7465W.19 S.7466W.19 S.7469 S.7470W.01 S.7470W.14 S.7471W.01 S.7471W.14 S.7475W.19 S.7476W.19 S.7479 S.7500W.01 S.7500W.14 S.7501W.01 S.7501W.14 S.7520W.01 S.7520W.14 S.7521W.01 S.7521W.14 S.7560W.01 S.7560W.14 S.7561W.01 S.7561W.14 S.7805N.09 S.7805W.09 S.7811N.09 S.7811W.09 S.7814N.09 S.7814W.09 S.7815N.09 S.7815W.09 S.7819N.09 S.7819W.09 S.7825N.09 S.7825W.09 S.7831N.09 S.7831W.09 S.7832N.09 S.7832W.09 S.7833N.09 S.7833W.09 S.7835N.09 S.7835W.09 S.7836N.09 S.7836W.09 S.7837N.09 S.7837W.09 S.7864N.09 S.7864W.09 S.7884N.09 S.7884W.09 S.7891N.09 S.7891W.09 S.7892N.09 S.7892W.09 S.7893N.09 S.7893W.09 S.7895N.09 S.7895W.09 S.7896N.09 S.7896W.09 S.7897N.09
STANDARD LUMINAIRES
on/off 24V mA DALI RGBW PAGE
ARTICLE
S.7897W.09
S.7900W.19 S.7910W.19 S.7911W.19 S.7912W.19 S.7920W.19 S.7921W.19 S.7922W.19 S.7930W.19 S.7931W.19 S.7932W.19 S.7950W.09 S.7960W.09 S.7961W.09 S.7962W.09 S.7970W.09 S.7971W.09 S.7972W.09 S.7980W.09 S.7981W.09 S.7982W.09 S.8500N.19 S.8500W.19 S.8501N.19 S.8501W.19 S.8502N.19 S.8502W.19 S.8568N.19 S.8568W.19 S.8570N.09 S.8570W.09 S.8571N.09 S.8571W.09 S.8572N.09 S.8572W.09 S.8578N.09 S.8578W.09 S.8580N.19 S.8580W.19 S.8581N.19 S.8581W.19 S.8582N.19 S.8582W.19 S.8588N.19 S.8588W.19 S.8590N.09 S.8590W.09 S.8591N.09 S.8591W.09 S.8592N.09 S.8592W.09 S.8598N.09 S.8598W.09 S.8805N.19 S.8805W.19 S.8811N.19 S.8811W.19 S.8814N.19 S.8814W.19 S.8815N.19 S.8815W.19 S.8819N.19 S.8819W.19 S.8825N.19 S.8825W.19
on/off 24V mA DALI RGBW PAGE
131 155 156 156 156 158 158 158 160 160 160 155 157 157 157 159 159 159 161 161 161 122 122 122 122 122 122 122 122 123 123 123 123 123 123 123 123 132 132 132 132 132 132 132 132 133 133 133 133 133 133 133 133 118 118 117 117 117 117 127 127 127 127 128 128
ARTICLE
S.8831N.19
S.8831W.19 S.8832N.19 S.8832W.19 S.8833N.19 S.8833W.19 S.8835N.19 S.8835W.19 S.8836N.19 S.8836W.19 S.8837N.19 S.8837W.19 S.8864N.19 S.8864W.19 S.8884N.19 S.8884W.19 S.8891N.19 S.8891W.19 S.8892N.19 S.8892W.19 S.8893N.19 S.8893W.19 S.8895N.19 S.8895W.19 S.8896N.19 S.8896W.19 S.8897N.19 S.8897W.19
on/off 24V mA DALI RGBW PAGE
368 368 368 368 368 368 368 369 369 369 369 369 369 369 359 359 359 359 359 359 359 359 359 359 359 359 119 119 117 117 117 117 127 127 127 127 129 129 119 119 119 119 119 119 129 129 129 129 129 129 121 121 131 131 121 121 121 121 121 121 131 131 131 131 131
118 118 118 118 118 118 128 128 128 128 128 128 120 120 130 130 120 120 120 120 120 120 130 130 130 130 130 130
COLOUR CODE LIST
Specify the colour/finishing by adding the following code to the article
COLOUR:
White
Black
Anodized aluminium Aluminium grey Burnished bronze Anthracyte grey FINISHING: Galvanized
Stainless steel Concrete
code .01 code .09 code .13 code .14 code .20 code .24
code .12 code .19 code .35
Standard fixture with integral DALI driver.
Standard fixture in constant voltage in 24V (requires a remote driver).
Standard fixture in constant current (mA) (requires a remote driver).
Standard ON/OFF fixture in 230V.
Standard RGBW fixture in constant voltage in 24V PWM (requires a remote driver).
VARIANTS LUMINAIRES AVAILABLE ON REQUEST WITH SURCHARGE
Variant with integral DALI driver.
Variants in constant voltage in 24V (requires remote driver). Variant in constant current (mA) (requires remote driver).

480
Printed by Euroteam Srl Brescia – Italy www.euroteam.eu
The present catalogue can not be reproduced even partially. All rights reserved.
Due to continual luminaire development and improvement, any photographs, luminaire descriptions, measurements, illustrations, drawings and specifications in this catalogue may be approximations, and the company is not liable.
We reserve the right to change specifications without prior notice. The technical data contained in this catalogue is update up to the date of print ( May 2019 ).
For updated data, see technical sheets and installing instructions available on the website. Luminaires in this catalogue are REGISTERED and/or PATENTED.
www.simes.com

www.simes.com
CATGENENG191